Gigabyte AGC310 Owner's manual

Bureau Veritas

Consumer Products Services Division (Shanghai)

No. 168, Guanghua Road, Zhuanqiao Town,

Minhang, Shanghai China, 201108

Tel.:86-21-24081888 Fax:86-21-64890042

Http:www. bureauveritas.com/cps

This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at

http://www.bureauveritas.com/cps and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or

use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples

identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample

was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results

thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or

omission caused by our negligence; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A

failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted

and the correctness of the report contents.

CHANGXING HEPING XINXING FURNITURE FACTORY

Technical Report:

(6618)128-1560

MAY.08, 2018

Date Received:

MAY.07, 2018

Page 1 of 4

LING YUN

CHANGXING HEPING XINXING FURNITURE FACTORY

HUICHELING VILLAGE,HEPING,ZHEJIANG PROVINCE,CHINA

Sample Description:

BASE

Manufacturer:

/

PO No.:

/

Buyer:

/

Style No

/

Country of Origin:

/

Country of Destination:

/

Color:

/

SKU No.:

/

Protocol No.:

/

Previous Report No.:

/

EXECUTIVE SUMMARY:

TEST REQUESTED

CONCLUSION

Remark

1)

ANSI BIFMA X5.1: 2017 partial test as per client request

PASS

/

REMARK:

The client specifies the test methods and requirements.

CHANGXING HEPING XINXING FURNITURE FACTORY

Technical Report: (6618)128-1560

MAY.08, 2018

Page 2 of 4

BVCPS (SHANGHAI) GENERAL CONTACT INFORMATION FOR THIS REPORT

TELEPHONE NO

E-MAIL:

86-21-24166888

[email protected]uveritas.com

BUREAU VERITAS

CONSUMER PRODUCTS SERVICE DIVISION (SHANGHAI)

Laboratory Test location:

No. 368, Guangzhong Road, Zhuanqiao Town, Minhang, Shanghai.

No. 168, Guanghua Road, Zhuanqiao Town, Minhang, Shanghai.

Hyde Bao

PRODUCT LINE MANAGER(HARDLINE DIVISON)

CHANGXING HEPING XINXING FURNITURE FACTORY

Technical Report: (6618)128-1560

MAY.08, 2018

Page 3 of 4

1.ANSI BIFMA X5.1: 2017 partial test as per client request

Evaluation

Citation / Method

Criteria

Results

Rating

Drop test - dynamic -

functional load

ANSI/BIFMA X5.1-17

Sec. 7

There shall be no loss of serviceability

when a test bag weighing 102 kg (225 lb.)

is raised 152 mm (6 in.) above the

uncompressed seat and released one time.

M

PASS

Drop test - dynamic -

proof load

ANSI/BIFMA X5.1-17

Sec. 7

There shall be no sudden and major

change in the structural integrity of the

chair (Loss of serviceability is acceptable)

when a proof load of 136 kg (300 lb.) is

raised 152 mm (6 in.) above the

uncompressed seat and released one time.

M

PASS

Caster or chair base

durability test - cyclic -

pedestal base chairs

ANSI/BIFMA X5.1-17

Sec. 16.1

[Durability cycling]

There shall be no loss of serviceability

when a 122 kg (270 lb.) load is on the

seat of the chair and cycled 2,000 cycles

over the obstacles then 98,000 cycles on a

smooth, hard surface without obstacles.

M

PASS

ANNEX I: SUBMISSION DESCRIPTION

Sample Description: BASE

The overall dimension was recorded as:

7.7 cm (D) x 4.3 cm (W) x 9.0 cm (H)

Sample weight: 0.5 kg

CHANGXING HEPING XINXING FURNITURE FACTORY

Technical Report: (6618)128-1560

MAY.08, 2018

Page 4 of 4

EXHIBIT

END

Gigabyte AGC310 Owner's manual

Gigabyte AGC310 Owner's manual

Related papers

Other documents