2. De Dietrich
  3. Quick user guide DIEMATIC Evolution

De Dietrich Quick user guide DIEMATIC Evolution User guide

  • Hello! I am an AI chatbot trained to assist you with the De Dietrich Quick user guide DIEMATIC Evolution User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
7717732 - v03 - 03/09/2019
1
51,2°C
29,4°C
Not set
None o OFF
OK
I
I
6,7°C
Quick user guide
Icons for accessing menus,
zones and parameters
Information on the selected
icon
Back key
Menu key
Rotary
selection
button
Conrm
button
Status indicator LED
- continuous green = normal operation
- ashing green = warning
- continuous red = shutdown
- ashing red = lockout
Standby screen
To deactivate the standby screen, press , or .
The screen goes into standby if no key is pressed for ve minutes.
Description of the interface
Activate a dierent timer programme
Scheduling
Schedule 2
Schedule 3
Schedule 1
>>>
Zone
I have run out of hot water
Boost the production of domestic hot water for a few hours
Hot water boost
02
00
00
Hour
Minute
03
01
01
>>>
I am away for a few days
Reduce the room temperature and the domestic hot water temperature during this
period of absence
End date holiday
Wished room temperature during holida...
03/01/2019 17:00
Start date holiday
20/12/2018 09:00
Reset
10.0°C
>>>
I want to stop the heating and activate cooling*
Activate Summer mode. Domestic hot water production is maintained.
Force summer mode
Off
Off
On
>>>
* only when a heat pump is used
2 7717732 - v03 - 03/09/2019
51,2°C
Not set
NoneoOFF
OK
I
CIRCA0
CH1
Room temp
--
A2: Comfort
20.0 °C
PH1
until: Tue. 22:00
6,7°C
Description of the selected
icon
Operating mode active in the selected zone:
Timer programme
- PH1 = programme 1
- PH2 = programme 2
- PH3 = programme 3
- PH4 = cooling programme
Manual mode
Temporary override
Holiday mode
Frost protection mode
Heating zones
In your installation, a heating zone is represented by one of the following icons:
Selected icon
I am too hot or too cold
Alter the temperatures used in the timer programmes
Set activity temperatures
>>>
Zone
19.5
20.5
19.0
20.0 °C
Reduced
Away
Morning
Evening
16.0°C
6.0°C
21.0°C
22.0°C
Comfort
20.0°C
Alter the room temperature for a few hours
Short temperature change
03
01
00
Hour
Minute
04
02
01
20.0 °C
19.5
20.5
19.0
>>>
Zone
I have changed my routine
Alter the timer programme (for heating, domestic hot water or cooling)
Tuesday WednesdayMonday
23:00 Reduced 19.0°C
6:00 Comfort 22.0°C
Add time and Activity
Copy to other day
Set Activity Temperatures
Zone configuration
Heating Schedule
Schedule 2
Schedule 3
Schedule 1
...
>>>
Zone
/