Jlab Audio Go Owner's manual

Brand: Jlab Audio

Model: Go

Type: Owner's manual

JLab

GO Bluetooth

PLAY / PAUSE

REJECT CALL

TRACK

FORWARD

TRACK

BACKWARD

POWER / BLUETOOTH

/ ACCEPT CALL

VOLUME UP

VOLUME

DOWN

USB

INPUT

LED INDICATOR

LIGHTS

CHARGING

Note: For optimum performance, charge the device fully for 4 hours prior to use.

After the first charge a 1-2 hour charge time can be expected. A fully charged

battery will support around 5 hours of continuous use.

1 Connect the Go Bluetooth to your computer or wall outlet using

the provided Mini USB cable and/or 5V power adapter (not included).

2 While charging, the LED lights on the bottom will be bright blue and

when charging is complete the lights will turn off.

POWER

BLUETOOTH FUNCTION

Note: Pairing is a process that securely connects Bluetooth enabled devices to

each other. The process will only have to be done once per device that you wish

to connect.

1 Once the GO Bluetooth is fully charged, press and hold the Power button for

10 seconds or until the blue and red LED lights flash alternately.

2 Release the Power button and quickly press once again. The device is now ready

to be paired with another Bluetooth compatible device.

3 Use your mobile device to search for the Bluetooth signal. The GO Bluetooth will

appear on your Bluetooth device list as “JLab-1BT”. Enter PIN code “0000” if

prompted. Pairing is now complete.

4 To power off, press and hold the Power button for 2 seconds or until the blue

and red LED lights flash alternately and then release.

ACCESSORIES

HEADPHONE PORTS / BUTTONS

LEFT

RIGHT BACK

GO BLUETOOTH

SPORTS HEADSET

We love that you are rocking JLab Audio!

We take pride in our products and fully stand behind them.

MICRO USB

CABLE

DAY

YOUR SATISFACTION IS GUARANTEED

You may exchange or return merchandise within 30 days of the purchase date.

Learn more at jlabaudio.com/guarantee

YOUR WARRANTY

You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio

authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

Reach out to us at [email protected] or visit jlabaudio.com/contact

CAUTIONS

• Avoid getting moisture or liquids into the tip of the earbuds

or headset ports.

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing the headset.

• Wax may build up in the earbud tips, lowering the sound quality.

Carefully remove the wax with a cotton swab or other small tool

to improve the sound quality.

• If you experience discomfort or pain, try lowering the volume

or discontinuing use temporarily.

• If you experience regular discomfort while using this product,

discontinue use and consult your physician.

• We recommend you treat your headset as you would a nice pair

of sunglasses and keep them in safe location when not in use.

TROUBLESHOOTING

• If the red LED indicator light flashes slowly, the GO Bluetooth needs to be recharged.

• If you hear no sound through the earbuds, please check the following:

- Ensure the headset is charged fully and powered on

- Ensure the headset is paired successfully with a Bluetooth compatible mobile device

- Ensure the distance between the headset and the compatible device is less than 33 feet away (10 meters)

- Ensure no other Bluetooth devices are paired at the same time

MAKE

RECEIVE TELEPHONE CALLS

Note: After the GO Bluetooth has paired with your mobile device,

you can use it to make and receive phone calls.

RECEIVE A CALL

You will be notified of an incoming call by a ringing sound through both earbuds. To accept, simply

press the Power button quickly and speak normally. To hang up, press the Power button again.

REFUSE A CALL

If you wish to refuse an incoming call, press the Play button.

VOLUME CONTROL

To adjust the volume of the GO Bluetooth while talking press the volume up bottom. To lower the

volume press the volume down button. Once you reach the maximum or minimum volume points,

a gentle beeping sound will be heard through both earbuds.

Notes:

• In order to pair the devices, the headset and the device must both be in pairing mode. If the GO Bluetooth can’t find a device to pair with

within 3 minutes, it will automatically shut down.

• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the speaker and the connected device.

The GO Bluetooth is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).

• Once successfully connected, the GO Bluetooth will memorize your device and automatically pair when turned on in the future.

• Only one device may be connected at a time. To void any existing connections, unpair the GO Bluetooth from your mobile device.

• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.

LISTEN TO MUSIC

Note: After the GO Bluetooth has paired with your mobile device or MP3 player,

you can use the headset to listen to and control music.

PLAY / PAUSE MUSIC

To play and pause music press the Play button.

TRACK CONTROL

If you wish to move to the next song press the Track Forward button, and if you wish to hear the

previous song press the Track Backward button.

VOLUME CONTROL

To adjust the volume of the GO Bluetooth while listening press the volume up bottom. To lower the

volume press the volume down button. Once you reach the maximum or minimum volume points,

a gentle beeping sound will be heard through both earbuds.

JLABAUDIO.COM

Jlab Audio Go Owner's manual

Jlab Audio Go Owner's manual

Jlab Audio Go Owner's manual

Related papers

Other documents