1
PROH7FMKII
SUPERCARDIOID
DYNAMIC MICROPHONE
English
Contact
Marketing and sales
Goang-Fann Co., Ltd.
+886-2-26931323
Manufacturing & logistics
Superlux Enterprise
Development ( Shanghai ) Co., Ltd.
2
PROH7FMKII
SUPER CARDIOID
DYNAMIC MICROPHONE
GENERAL DESCRIPTION
The PROH7FMKII is a super
cardioid microphone with
perfect performance and
classic appearance, it meet to
the expectations of cus-
tomers who are keen on the
affection in remembering the
past especially between the
50’s and 60’s ─ The period of
the golden age of jazz music.
Though PROH7FMKII looks
like an ancient articles but its
technical performance is sub-
stantially modernized with very
advanced specicationsadapt
to a various of use in audio
miking up to date.
FEATURES
• Classic and elegant appear-
ance, modernized perfor-
mance.
3
• Tailored frequency response for speech. Vocals and
instruments miking.
• Shock-mounted cartridge minimized mechanical and
vibrational noise.
• A self-tensioning swivel mount permits tilting 45° toward
the vocalist and 80° toward the opposite.
• External ON/OF switch easy to operate.
• Shell construction with 5/8"~27T screw adaptor design.
• Microphone was pro-environmental chromeplated, let it
lasting as bright as when new.
PROH7FMKII FREQUENCY RESPONSE ( SUPERCARDIOID )
4
PROH7FMKII
SUPERCARDIOID DYNAMIC MICROPHONE
SPECIFICATIONS
Type Dynamic microphone
Polar Pattern Unidirectional ( Supercardioid ) , rota-
tionally symmetrical about microphone
axis, uniform with frequency.
Frequency
Response
50～15,000 Hz
Sensitivity ( at
1,000 Hz Open
Circuit Voltage )
-55dBV/Pa 1.8mV/Pa ±3dB ,
1Pa=94dB SPL
Rated impedance 300Ω
Connectors Integral 3 pin male XLR type
Finish Pro-environmental chromeplated
outlook design
Environmental
conditions
The PROH7FMKII operates between
-10°C to +50°C ( 14°F to 122°F ) with
relative humidity between 0 to 95%
Dimensions
56.0mm x 67.5mm x 191.0mm 2.20
in x 2.66 in x 7.50 in
Net Weight
520 g 18.3 oz
*Note:Specications are subject to change.
5
Unit:mm/inch
6
D1
Table stand included
HM6
Table stand
MS104
Instrument boom stand
ECO SERIES
Microphone cable
YA2 threaded
adapter
Pouch
ACCESSORIES FURNISHED
RELATED ACCESSORIES
7
!
!
!
SAFETY PRECAUTIONS
Safety symbols-“WARNING” AND “CAUTION”- and mes-
sages described below are used in this manual to prevent
bodily injury and property damage which could result from
mishandling. Before operating your product, read this manu-
al rst and understand the safety symbols and messages so
you are thoroughly aware of the potential safety hazards.
!
WARNING: Indicates a potentially hazardous situ-
ation which, if mishandled, could result in death or
serious personal injury.
CAUTION: Indicates a potentially hazardous situa-
tion which, if mishandled, could result in moderate or
minor personal injury, and/or property damage.
WARNING
‧Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in re or electric shock.
‧Do not attempt to modify this product. Doing so
could result in personal injury and/or product failure.
CAUTION
‧Do not subject to extreme force and do not pull on
the cable or failures may result.
‧Keep the device dry and avoid exposure to extreme
temperatures and humidity.
8
www.superlux.com.tw
P/N:LB1000H7F01EN JUN, 2020
LIMITED WARRANTY
For compliance with the instructions which record in the user manual, Superlux En-
terprise provide one year period warranty for all material and producing quality from
purchase date. This warranty term will adjust according to different country or area.
Please contact local distributor to receive more information. In the validity period,
if there’s any material, producing quality, or any function unavailable, Superlux will
repair or replace the parts. This warranty is only for the product which selling by
distributor or agent which authorized by Superlux. However, the situation below is
excluded in the warranty :
The damage which caused by accident, abuse, improper instructions, self-modica-
tion and repair, or damage from transportation, not complying with the instructions
which record in the manual, repair by the company which didn’t authorized by
Superlux Enterprise, request by distributor without authorized, or the serial number
sticker on Superlux product is unidentied, modied, or removed. All repair of
Superlux products can only accept from repair centre, distributor or agent which
authorized by Superlux. Unauthorized repair, maintenance and modication will not
receive relevant warranty and will be excluded in the warranty. Any repair guarantee
under warranty need to provide selling receipt from authorized distributor or agent to
make sure your Superlux product still in the warranty period. To obtain the original
authorized repair warranty, please contact authorized distributor, agent or send an
e-mail to [email protected] to contact us.
/
