Xerox Auto Copy App Installation guide

Xerox
Brand
Xerox
Model
Auto Copy App
Type
Installation guide

This manual is also suitable for

Q U I C K S T A R T
Xerox
®
Auto Copy App
Quick Start Guide for use with Xerox
®
Auto Copy
DESCRIPTIO N
Xerox
®
Auto Copy is a Xerox Gallery App that helps you be more productive by automatically
producing copies when you place your original documents in the document handler.
Simply configure the Xerox
®
Auto Copy App to be your default screen when originals are loaded
into the document feeder and get ready to start making copies.
Authenticated users may customize copy setting defaults and save these for future repeated
use.
The app is available free of charge and is applicable to Xerox
®
AltaLink
®
and WorkCentre
®
i-
Series models.
Device Requirements
All devices require the following:
• Xerox Extensible Interface Platform
®
(EIP) must be enabled to allow the app to be
installed.
• Devices must be a Xerox
®
AltaLink
®
or WorkCentre
®
i-Series model.
• Xerox
®
ConnectKey
®
App Installation (Weblet Install Policy) must be enabled to allow
installation of the App.
• Ensure the device can communicate with the Internet.
For more information on the settings above, refer to the Xerox App Gallery Online Support at:
https://www.support.xerox.com/support/xerox-app-gallery/documentation/enus.html
I N S T A L L I N G X E R O X
®
AUTO CO P Y
The following procedure assumes you have
created a Xerox App Gallery account. If you do
not have access to a Xerox App Gallery account,
refer to the Xerox App Gallery Quick Start Guide
for instructions on creating an account.
1. Go to the Xerox App Gallery URL:
https://www.xerox.com/appgallery
2. Select Log In.
3. Enter a valid Email and Password.
4. On the devices tab, add a Multifunction
Printer or Printer, if necessary.
5. On the All Apps tab, select the desired app.
6. Select the Install button.
For more Apps visit www.xerox.com/appgallery
© 2020 Xerox Corporation. All rights reserved. Xerox®, Xerox Extensible Interface Platform®, AltaLink®, WorkCentre® and ConnectKey® are trademarks of Xerox Corporation in the
United States and/or other countries. BR32438
Q U I C K S T A R T
Xerox
®
Auto Copy App
I N I T I A L SET U P
To configure the App to execute when paper is
inserted into the document feeder:
1. Log In to the Embedded Web Server.
2. Select Properties > General Setup > Entry
Screen Defaults.
3. Select Auto Copy as your Default Screen
when Originals are Detected.
M A K I N G A C O P Y
1. Insert your original documents into the
document feeder.
2. The App will initiate, and a 7-second
countdown will begin before the copy
starts.
3. Another original may be loaded into the
document feeder to make another copy.
4. You can pause the countdown timer to
make changes to the Copy settings.
Selecting Start Now will start copying.
C UST O M I Z E D D E F A ULT S
You can save customized Copy defaults
associated with your Log In username.
1. Log In with your user credentials or
authenticate with your card.
2. Select the Auto Copy App.
3. Select your customized Copy settings.
4. Touch Customize Defaults > Make
Current Settings Default.
5. Reset will restore the customized default
Copy settings at any time.
C A N C E L LIN G C O P Y
If Auto Copy is configured to be your Default
Screen when Originals are Detected, and you
need to use another App, simply interrupt the
countdown by selecting Cancel.
  • Page 1 1
  • Page 2 2

Xerox Auto Copy App Installation guide

Xerox
Brand
Xerox
Model
Auto Copy App
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers