ENGLISH
5
Features
This appliance includes some or all of the
following features:
1. Hook
2. LED light bar
3. Battery status LED
4. On/off/brightness switch
5. 12 Vdc charging socket
6. Mains charging adaptor
Charging the light bar (fig. A)
X Make sure that the light bar is
switched off (the on/off/brightness
switch is in the O position).
Warning! Do not charge for longer than
10 hours.
X Insert the charger jack plug (7) into
the 12 Vdc charging socket (5).
X Insert the mains charging adaptor (6)
into a mains power socket.
X The red battery status LED (3) will
illuminate to show that the product is
charging (do not charge for more
than 10 hours).
X Once the product is fully charged the
red battery status LED (3) will flash.
X Remove the mains charging adaptor
(6) from the mains power socket.
X Remove the charger jack plug (7)
from the 12Vdc charging socket (5).
Use
Using the hook (fig. B)
X The hook (1) may be used to store or
suspend the light bar. The hook
rotates so that the light bar (1) can be
set to any position. Make sure that
the hook is secure around the
supporting object.
Operating the light bar (fig. C)
X To illuminate half of the LED's move
the on/off/brightness switch (4) to the
position.
X To illuminate all of the LED's move
the on/off/brightness switch (4) to the
position.
X To turn the unit off, move the on/off/
brightness switch (4) to the O
position.
Maintenance
Your Black & Decker appliance has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation
depends upon proper care and regular
cleaning.
Warning! Before performing any
maintenance or cleaning of the
appliance, unplug the unit from the power
supply.
X From time to time wipe the appliance
with a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Do not immerse the appliance in
water.
Protecting the environment
Separate collection. This
product must not be disposed of
with normal household waste.
Should you find one day that your
appliance needs replacement, or if it is of
no further use to you, think of the
protection of the environment. Black &
Decker repair agents will accept old Black
& Decker tools and ensure that they are
disposed of in an environmentally safe
way.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you purchase
a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
any authorised repair agent who will
collect them on our behalf.