Pro-Ject Debut III Product information

Debut III
Pro-Ject
Brand
Pro-Ject
Model
Debut III
Category
Turntable
Type
Product information

This manual is also suitable for

Pro-Ject Debut III Phono USB: Experience the fusion of classic vinyl sound with modern digital convenience. This turntable boasts an integrated MM phono pre-amplifier and A/D converter, allowing direct connection to your computer via USB for easy recording and digitalization of your vinyl collection. Its high-grade components, including the Ortofon OM 5E cartridge and 8.6" aluminum tonearm, ensure exceptional audio quality.

Pro-Ject Debut III Phono USB: Experience the fusion of classic vinyl sound with modern digital convenience. This turntable boasts an integrated MM phono pre-amplifier and A/D converter, allowing direct connection to your computer via USB for easy recording and digitalization of your vinyl collection. Its high-grade components, including the Ortofon OM 5E cartridge and 8.6" aluminum tonearm, ensure exceptional audio quality.

Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 24.5.07
Pro-Ject Debut III/Phono USB
Manual turntable with fitted cartridge
Ortofon OM 5E and
integrated MM phono pre-amplifier with
A/D converter and USB output
Turntable
Chassis available in silver or matt black
Product information
A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The motor is decoupled from the plinth to reduce vibration transmission.
The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6
The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The headshell and undamped armtube are fashioned from a single piece.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
The counterweight supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative
counterweight for cartridges weighing between 6 - 9g is available as an accessory part.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The straight armtube with an effective length of 8,6" reduces toe-in error.
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III/Phono to any line level/auxiliary
input (Computer, Midi System, Mixer etc.).
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Phono Pre-amplifier
Optimal channel separation through dual-mono circuitry
Digitalisation of analog signals for recording direct to disk via USB with suitable recording programs
Runs on Windows
®
, MacOS
®
and Linux
®
operating systems
Technical specifications Phono Pre-amplifier - A/D converter
Noise floor: 88dB
THD: 0,005%
Input impedance: 47kohms/100pF
Power consumption: 16V/40mA AC
Gain: 32dB
Output voltage typically: 160mV/1kHz at 4mV/1kHz
RIAA-equalisation curve accuracy: > 0,5dB/20Hz - 20kHz
USB output: digital serial data protocol USB 1.1
The manufacturer reserves the right to alter the technical specifications without notice.
The unit may only be connected to a line level input.
  • Page 1 1

Pro-Ject Debut III Product information

Debut III
Pro-Ject
Brand
Pro-Ject
Model
Debut III
Category
Turntable
Type
Product information
This manual is also suitable for

Pro-Ject Debut III Phono USB: Experience the fusion of classic vinyl sound with modern digital convenience. This turntable boasts an integrated MM phono pre-amplifier and A/D converter, allowing direct connection to your computer via USB for easy recording and digitalization of your vinyl collection. Its high-grade components, including the Ortofon OM 5E cartridge and 8.6" aluminum tonearm, ensure exceptional audio quality.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents