Software Installation Notice for Windows 98
When you are installing your software in Microsoft
®
Windows
®
98, you may see a
screen asking you to insert your Windows 98 CD-ROM.
Do not remove your EPSON
®
1000 ICS CD-ROM and do not click
OK
; ignore the
screen for now.
Click the EPSON Software Installation screen and continue installing your software,
as described on the Start Here poster.
After you finish installing your software and registering your EPSON 1000 ICS, the
screen above reappears. Remove your EPSON 1000 ICS CD-ROM and insert your
Windows 98 CD-ROM, then click
OK
. (If necessary, click
Browse
, then locate the
Win98
folder on the CD-ROM and then click
OK
.)
Do not attempt a test scan before inserting your Windows CD-ROM and
following the steps above; Windows needs to install a file before you can
use your scanner.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. General Notice: Other product names
used herein are for identification purposes only and may be trademarks of their respective owners. EPSON
disclaims any and all rights in those marks.
Copyright © 2002 Epson America, Inc. 4/02 CPD-14035
Don’t click yet
,]XVOLSIP3DJH7XHVGD\$SULO30
