User's Guide
Digital 1.8 GHz
DIGITAL CORDLESS
TELEPHONE
WITH *CALLER ID AND
HANDSET SPEAKERPHONE
Model ME5051R Series
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the
property of their respective owners. © Motorola, Inc. 2006.
Alphanumeric keypad
R (Flash)
Access a Call Waiting Line /
Holding and transferring calls (PABX)
Changing the Handset Volume
ME5051-1
ME5051-2
ME5051-3
ME5051-4
CAUTION : PLEASE DO NOT USE ALKALINE OR NON-
RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT
DAMAGE TO THE UNIT AND VOID THE WARRANTY.
Note: To ensure the battery charging properly, clean the charging contacts on the
handset and charger with a soft, dry cloth once a month. Clean more often if the unit is
subject to grease, dust or high humidity.
Insert the 2 x AAA (600mAh/1.2V) Ni-MH re-chargeable batteries
supplied, observing the correct polarity.
Replace the cover on the battery compartment, press to release latch and pull the battery
door upwards. Place the handset in the base station.
Caller ID on Call Waiting
(dependent on network)
*
*
+
+
* user must subscribe to the network's caller id service.
+ more then one handset required.
Programmable call block
Operation with 2 standard AAA
re-chargeable batteries
Standards
Display Icons
6
7
1
2
3
4
5
8
9
10
11
12
13
14
15
10. R (Flash) key, Access a Call Waiting Line /
Hold and transfer calls when connected to PABX
PORTUGUES
/