LG 25UM64 User manual

www.lg.com

Owner's Manual

IPS LED MONITOR

(LED MONITOR)

25UM64

25UM65

34UM64

34UM65

Please read the safety information carefully

before using the product.

IPS LED Monitor (LED Monitor) Model List

ENGLISH

2

TABLE OF CONTENTS

3 LICENSE

4 ASSEMBLING AND

PREPARING

4 Product Composition

5 Product and Button Description

6 - How to Use the Joystick Button

7 - Input Connector

8 Moving and Lifting the

Monitor

9 Installing the Monitor

9 - Assembling the Stand

12 - Detaching the Stand

15 - Installing on a Table

16 - Adjusting the angle

17 - Tidying up Cables

18 - Installing the Wall Mount Plate

18 - Installing on the Wall

20 - Using the Kensington Lock

21 USING THE MONITOR

21 Connecting to a PC

21 - DVI Connection

22 - HDMI Connection

22 - DisplayPort Connection

23 Connecting AV Devices

23 - HDMI Connection

23 Connecting Peripherals

23 - Connecting Headphones

24 INSTALLING THE LG

MONITOR SOFTWARE

26 USER SETTINGS

26 Activating the Main Menu

26 - Main Menu Features

27 User Settings

27 - Menu Settings

28 - Ratio

29 - Function

30 - PBP

31 - Picture

32 - Color

33 - Settings

34 - Reset

35 - Reader

36 TROUBLESHOOTING

38 PRODUCT SPECIFICATION

40 Factory Support Mode

(Preset Mode, DVI-D/HDMI/DisplayPort

PC)

40 HDMI Timing (Video)

40 Power LED

41 PROPER POSTURE

41 Proper Posture for Using the Monitor

WARNING: This product contains chemicals known to the State of California to cause cancer and birth

defects or other reproductive harm. Wash hands after handling.

ENGLISH

3

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

VESA, VESA logo, DisplayPort compliance logo and DisplayPort

compliance logo for dual-mode source devices are all registered trademarks of

the Video Electronics Standards Association.

ENGLISH

4

ASSEMBLING AND PREPARING

Product Composition

Please check whether all the components are included in the box before using the product. If there are

any missing components, contact the retailer where you purchased the product. Note that the product and

related components may look different from those shown here.

or

CD (Owner's Manual /

Software) / Guides /

Cards

Power cord AC/DC Adapter

AC/DC Adapter

(Depending upon

country)

(Depending upon country)

HDMI cable

25UM65

25UM64

Stand Base Stand Body Screw Cover

Two Screws

(M4 x 10)

34UM65

Stand Base Screw Cover

Two Screws

(M4 x 10)

Clear sheet

y

Always use genuine LG components to ensure safety and product performance.

y

The product warranty will not cover damage or injury caused by the use of unauthorized components.

CAUTION

34UM64

ENGLISH

5

ASSEMBLING AND PREPARING

y

The components may look different from those illustrated here.

y

Without prior notice, all product information and specifications contained in this manual are subject to

change to improve the performance of the product.

y

To purchase optional accessories, visit an electronics store or an online shopping site, or contact the

retailer from which you purchased the product.

y

The power cord provided may differ depending upon the region.

NOTE

Product and Button Description

25UM65

25UM64

Joystick

Button

Power Indicator

y

On Power on

y

Off Power off

y

The joystick button is located at the bottom of the monitor.

NOTE

ENGLISH

6

ASSEMBLING AND PREPARING

34UM65

Joystick

Button

Power Indicator

y

On Power on

y

Off Power off

y

The joystick button is located at the bottom of the monitor.

NOTE

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with

your finger.

Basic Functions

Power on

Press the joystick button once with your finger to turn on the

monitor.

Power off

Press and hold the joystick button once with your finger to turn off

the monitor.

◄/►

Volume

Control

You can control the volume by moving the joystick button left/right.

34UM64

ENGLISH

7

ASSEMBLING AND PREPARING

Input Connector

25UM65

25UM64

DVI-D IN

DP IN

HDMI IN 2

H/P

HDMI IN 1

AUDIO IN(PC)

DC-IN

(19 V )

34UM65

HDMI IN 2

DC-IN

(19 V )

HDMI

IN

2

DVI-D IN

DP IN

H/P

HDMI IN 1

AUDIO IN

(PC)

34UM64

ENGLISH

8

ASSEMBLING AND PREPARING

Moving and Lifting the

Monitor

When moving or lifting the monitor, follow these

instructions to prevent the monitor from being

scratched or damaged and to ensure safe trans-

portation, regardless of its shape or size.

y

Place the monitor in the original box or pack-

ing material before attempting to move it.

y

Before moving or lifting the monitor, discon-

nect the power cord and all other cables.

y

Hold the bottom and side of the monitor frame

firmly. Do not hold the panel itself.

y

When holding the monitor, the screen should

face toward you to prevent it from being

scratched.

y

When transporting the monitor, do not expose

the monitor to shock or excessive vibration.

y

When moving the monitor, keep it upright and

never turn the monitor on its side or tilt it side-

ways.

y

Avoid touching the monitor screen as much as

possible.

- This may result in damage to the screen or

some of the pixels used to create images.

y

If you use the monitor panel without the stand

base, its joystick button may cause the moni-

tor to become unstable and fall, resulting in

damage to the monitor or human injury. In

addition, this may cause the joystick button to

malfunction.

CAUTION

ENGLISH

9

ASSEMBLING AND PREPARING

Installing the Monitor

Assembling the Stand

y

Applying excessive force when tightening

screws may cause damage to the monitor.

Damage caused in this way will not be cov-

ered by the product warranty.

y

If you use the monitor panel without the

stand base, its joystick button may cause the

monitor to become unstable and fall, result-

ing in damage to the monitor or human injury.

In addition, this may cause the joystick button

to malfunction.

CAUTION

25UM65

25UM64

1

Place the screen face down.

y

To protect the screen from scratches, cover

the surface with a soft cloth.

CAUTION

2

Check the direction of the stand body (front,

back) and then mount the stand body onto the

stand hinge.

Stand Hinge

Stand Body

3

Tighten two screws into the back of the stand

body and close the screw cover.

Screw Cover

ENGLISH

10

ASSEMBLING AND PREPARING

4

Fix the stand base to the stand body. Turn the

screws on the stand base to the right.

Stand Body

Stand Base

ENGLISH

11

ASSEMBLING AND PREPARING

34UM65

1

Place the screen face down.

Stand Hinge

y

To protect the screen from scratches, cover

the surface with a soft cloth.

CAUTION

2

Mount the stand base onto the stand hinge as

shown in the illustration. Fix two screws into

the back of the stand base and close the screw

cover.

Stand Base

120 mm

(4.7 inch)

Screw Cover

or

100 mm

(3.9 inch)

y

The stand height is adjustable by 20 mm

(0.7 inch).

y

When tightening the screws after mounting

the stand base onto the stand hinge, be sure

to hold the stand base with your hand. Other-

wise, the product may fall, causing personal

injury or damage to the product.

y

Be careful not to hurt your hand on the edges

of the screw covers.

CAUTION

34UM64

ENGLISH

12

ASSEMBLING AND PREPARING

Detaching the Stand

y

Illustrations in this document represent typical

procedures, so they may look different from

the actual product.

y

Do not carry the monitor upside down by just

holding the base. This may cause the monitor

to fall off the stand and could result in personal

injury.

y

When lifting or moving the monitor, do not

touch the monitor screen. The force applied to

the monitor screen may cause damage to it.

y

If you use the monitor panel without the stand

base, its joystick button may cause the moni-

tor to become unstable and fall, resulting in

damage to the monitor or human injury. In

addition, this may cause the joystick button to

malfunction.

CAUTION

25UM65

25UM64

1

Place the screen face down.

CAUTION

y

To protect the screen from scratches, cover

the surface with a soft cloth.

2

Turn the screws on the stand base to the left to

detach the stand base from the stand body.

Stand Base

Stand Body

ENGLISH

13

ASSEMBLING AND PREPARING

3

Lift up the screw cover to detach the screw

cover from the stand body. Remove the screws

from the back of the stand body using a screw-

driver and detach the stand body from the

stand hinge as shown in the illustration.

Stand Hinge

Screw Cover

Stand Body

ENGLISH

14

ASSEMBLING AND PREPARING

34UM65

1

Place the screen face down.

y

To protect the screen from scratches, cover

the surface with a soft cloth.

CAUTION

2

Detach the screw cover from the stand base

as shown in the illustration and then remove

the two screws on the back to detach the stand

base from the hinge.

Screw Cover

Stand Base

y

When removing the screws to detach the

stand base from the hinge, be sure to hold

the stand base with your hand. Otherwise, the

product may fall, causing personal injury or

damage to the product.

CAUTION

34UM64

ENGLISH

15

ASSEMBLING AND PREPARING

2

Connect the power adapter to the monitor and

then plug the power cord into the wall outlet.

25UM65

34UM65

or

25UM64

3

Press the joystick button on the bottom of the

monitor to turn on the monitor.

y

Unplug the power cord before moving or

installing the monitor. There is risk of electric

shock.

CAUTION

Installing on a Table

1

Lift the monitor and place it on the table in an

upright position. Place the monitor at least

10 cm away from the wall to ensure sufficient

ventilation.

25UM65

25UM64

10 cm

10 cm (3.9 inch)

10 cm

34UM65

10 cm

10 cm (3.9 inch)

10 cm

34UM64

ENGLISH

16

ASSEMBLING AND PREPARING

Adjusting the angle

1

Place the monitor mounted on the stand base

in an upright position.

2

Adjust the angle of the screen.

The angle of the screen can be adjusted forward

or backward from -5° to 20° for a comfortable

viewing experience.

-520

Front

Rear

25UM65

25UM64

The angle of the screen can be adjusted forward

or backward from -5° to 15° for a comfortable

viewing experience.

34UM65

-515

Front

Rear

y

When you adjust the angle, do not hold the

stand as shown on the following illustration.

You may injure your fingers.

25UM65

-515

34UM65

-520

25UM64

y

Be careful not to touch or press the screen

area when adjusting the angle of the monitor.

-520

-515

25UM65

34UM65

25UM64

WARNING

34UM64

ENGLISH

17

ASSEMBLING AND PREPARING

y

Cables can get caught in the hinge area as

shown in the illustration, so be careful when

organizing cables.

34UM65

NOTE

Tidying up Cables

Tidy up cables using the cable holder on the stand

base as shown in the illustration.

25UM65

25UM64

34UM65

34UM64

ENGLISH

18

ASSEMBLING AND PREPARING

Installing the Wall Mount Plate

This monitor meets the specifications for the wall

mount plate or other compatible devices.

1

Place the screen face down. To protect the

screen from scratches, cover the surface with a

soft cloth.

2

Attach the clear sheet to the back of the moni-

tor and align it with the screw holes.

(Only 34UM65, 34UM64)

Clear sheet

(PET sheet)

3

Place the wall mount plate onto the monitor

and align it with the screw holes.

4

Tighten the four screws to fix the plate to the

monitor using a screwdriver.

Wall mount plate

y

The wall mount plate is sold separately.

y

For more information on installation, refer to

the wall mount plate's installation guide.

y

Be careful not to apply too much force while

mounting the wall mount plate as it may cause

damage to the screen

NOTE

Installing on the Wall

Install the monitor at least 10 cm (3.9 inch) away

from the wall and leave about 10 cm (3.9 inch)

of space at each side of the monitor to ensure

sufficient ventilation. Detailed installation instruc-

tions can be obtained from your local retail store.

Alternatively, please refer to the manual for how to

install and set up a tilting wall mounting bracket.

10 cm (3.9 inch)

10 cm

To install the monitor to a wall, attach a wall mount-

ing bracket (optional) to the back of the monitor.

Make sure that the wall mounting bracket is se-

curely fixed to the monitor and to the wall.

1

If you use screws longer than the standard

length, it may damage the inside of the prod-

uct.

2

A non-VESA standard screw may damage the

product and cause the monitor to fall. LG Elec-

tronics is not liable for any accidents relating to

the use of non-standard screws.

ENGLISH

19

ASSEMBLING AND PREPARING

y

Unplug the power cord before moving or install-

ing the monitor to avoid electric shock.

y

Installing the monitor on the ceiling or on a

slanted wall may result in the monitor falling off,

which could lead to injury. Use an authorized LG

wall mount and contact the local dealer or quali-

fied personnel.

y

Applying excessive force when tightening

screws may cause damage to the monitor. Dam-

age caused in this way will not be covered by

the product warranty.

y

Use the wall mounting bracket and screws that

conform to VESA standards. Damage caused by

the use or misuse of inappropriate components

will not be covered by the product warranty.

y

When measured from the back of the monitor,

the length of each installed screw must be 8 mm

or less.

Wall Mount Plate

Back of the Monitor

Screw

Dimensions

: M4 x L10

Wall Mount Plate

Back of the Monitor

Max 8 mm (0.3 inch)

CAUTION

Model 25UM65

25UM64

34UM65

34UM64

Wall Mount (A x B) 75 x 75 100 x 100

Stand Screw M4 x 10 mm

Required Screws 4

Wall Mount Plate

(Optional)

RW120

y

Wall Mount (A x B)

A

B

y

Use the screws specified by VESA standards.

y

The wall mount kit includes the installation guide

and all necessary parts.

y

The wall mounting bracket is optional. You can

obtain optional accessories from your local dealer.

y

The length of the screw may differ for each wall

mounting bracket. Be sure to use the proper

length.

y

For more information, please refer to the user

manual for the wall mounting bracket.

NOTE

ENGLISH

20

ASSEMBLING AND PREPARING

Using the Kensington Lock

The connector for the Kensington security system

is located at the back of the monitor.

For more information on installation and usage,

refer to the Kensington lock owner's manual or visit

the website at http://www.kensington.com.

Connect the monitor to a table using the Kensing-

ton security system cable.

25UM65

25UM64

34UM65

y

The Kensington security system is optional.

You can obtain optional accessories from most

electronics stores.

NOTE

34UM64

Page is loading ...

LG 25UM64 User manual

This manual is also suitable for

LG 25UM64 User manual

Related papers