Dell 270 Owner's manual

Brand: Dell

Model: 270

Category: Mini PCs

Type: Owner's manual

Dell Vostro 270

Owner’s Manual

Regulatory Model: D11M

Regulatory Type: D11M002

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Trademarks used in this text: Dell

™

, the DELL logo, Dell Precision

™

, Precision ON

™

,ExpressCharge

™

, Latitude

™

, Latitude ON

™

OptiPlex

™

, Vostro

™

, and Wi-Fi Catcher

™

are trademarks of Dell Inc. Intel

, Pentium

, Xeon

, Core

™

, Atom

™

, Centrino

, and Celeron

are registered trademarks or trademarks of Intel Corporation in the U.S. and other countries. AMD

is a registered trademark and

AMD Opteron

™

, AMD Phenom

™

, AMD Sempron

™

, AMD Athlon

™

, ATI Radeon

™

, and ATI FirePro

™

are trademarks of Advanced Micro

Devices, Inc. Microsoft

, Windows

, MS-DOS

, Windows Vista

, the Windows Vista start button, and Office Outlook

are either

trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Blu-ray Disc

™

is a trademark

owned by the Blu-ray Disc Association (BDA) and licensed for use on discs and players. The Bluetooth

word mark is a registered

trademark and owned by the Bluetooth

SIG, Inc. and any use of such mark by Dell Inc. is under license. Wi-Fi

is a registered

trademark of Wireless Ethernet Compatibility Alliance, Inc.

2012 — 9

Rev. A00

Contents

Notes, Cautions, and Warnings...................................................................................................2

1 Working on Your Computer.......................................................................................................5

Before Working Inside Your Computer.....................................................................................................................5

Turning Off Your Computer.......................................................................................................................................6

After Working Inside Your Computer........................................................................................................................6

2 Removing and Installing Components.....................................................................................7

Recommended Tools................................................................................................................................................7

Removing the Cover..................................................................................................................................................7

Installing the Cover...................................................................................................................................................8

Removing the Front Bezel.........................................................................................................................................8

Installing the Front Bezel..........................................................................................................................................9

Removing the Expansion Card..................................................................................................................................9

Installing the Expansion Card.................................................................................................................................10

Removing the System Fan.......................................................................................................................................10

Installing the System Fan........................................................................................................................................11

Removing the Memory............................................................................................................................................12

Installing the Memory.............................................................................................................................................12

Removing the Optical Drive....................................................................................................................................12

Installing the Optical Drive.....................................................................................................................................13

Removing the Hard Drive........................................................................................................................................14

Installing the Hard Drive.........................................................................................................................................15

Removing the Wireless Local Area Network (WLAN) Card...................................................................................15

Installing the Wireless Local Area Network (WLAN) Card....................................................................................15

Removing the Card Reader.....................................................................................................................................16

Installing the Card Reader......................................................................................................................................17

Removing the Power Supply Unit (PSU).................................................................................................................17

Installing the Power Supply Unit (PSU)..................................................................................................................18

Removing the Power Switch...................................................................................................................................18

Installing the Power Switch....................................................................................................................................19

Removing the I/O Panel..........................................................................................................................................19

Installing the I/O Panel............................................................................................................................................21

Removing the Processor.........................................................................................................................................21

Installing the Processor..........................................................................................................................................23

Removing the Coin-Cell Battery..............................................................................................................................23

Installing the Coin-Cell Battery...............................................................................................................................24

Removing the System Board...................................................................................................................................24

System Board Layout..............................................................................................................................................25

Installing the System Board....................................................................................................................................26

3 System Setup.............................................................................................................................29

Boot Sequence.......................................................................................................................................................29

Navigation Keys......................................................................................................................................................29

System Setup Overview..........................................................................................................................................30

Enter System Setup................................................................................................................................................30

Jumper Settings......................................................................................................................................................30

System Setup Screens............................................................................................................................................31

System Setup Options.............................................................................................................................................31

Exit....................................................................................................................................................................33

Updating the BIOS .................................................................................................................................................33

Clearing Forgotten Password.................................................................................................................................34

Clearing CMOS Passwords.....................................................................................................................................35

System and Setup Password..................................................................................................................................36

Assigning a System Password and Setup Password......................................................................................36

Deleting or Changing an Existing System and/or Setup Password..................................................................37

Disabling a System Password..........................................................................................................................37

4 Diagnostics.................................................................................................................................39

Enhanced Pre-Boot System Assessment (ePSA) Diagnostics...............................................................................39

5 Troubleshooting.........................................................................................................................41

Diagnostic Power LED Codes.................................................................................................................................41

Diagnostic Beep Codes..........................................................................................................................................42

Diagnostic Error Messages....................................................................................................................................42

System Error Messages..........................................................................................................................................46

6 Technical Specifications.........................................................................................................47

7 Contacting Dell..........................................................................................................................51

Working on Your Computer

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your

personal safety. Unless otherwise noted, each procedure included in this document assumes that the following

conditions exist:

• You have read the safety information that shipped with your computer.

• A component can be replaced or--if purchased separately--installed by performing the removal procedure in

reverse order.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For

additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/

regulatory_compliance

CAUTION: Many repairs may only be done by a certified service technician. You should only perform

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your

warranty. Read and follow the safety instructions that came with the product.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically

touching an unpainted metal surface, such as a connector on the back of the computer.

CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a

card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its

pins.

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some

cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs

before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any

connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.

NOTE: The color of your computer and certain components may appear differently than shown in this document.

To avoid damaging your computer, perform the following steps before you begin working inside the computer.

1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.

2. Turn off your computer (see Turning Off Your Computer).

CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the

cable from the network device.

3. Disconnect all network cables from the computer.

4. Disconnect your computer and all attached devices from their electrical outlets.

5. Press and hold the power button while the computer is unplugged to ground the system board.

6. Remove the cover.

CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal

surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal

surface to dissipate static electricity, which could harm internal components.

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your

computer.

1. Shut down the operating system:

– In Windows 7:

Click Start , then click Shut Down.

– In Windows Vista:

Click Start , then click the arrow in the lower-right corner of the Start menu as shown below, and then

click Shut Down.

– In Windows XP:

Click Start → Turn Off Computer → Turn Off . The computer turns off after the operating system shutdown

process is complete.

2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not

automatically turn off when you shut down your operating system, press and hold the power button for about 6

seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before

turning on your computer.

1. Replace the cover.

CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the

computer.

2. Connect any telephone or network cables to your computer.

3. Connect your computer and all attached devices to their electrical outlets.

4. Turn on your computer.

5. If required, verify that the computer works correctly by running the Dell Diagnostics.

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Recommended Tools

The procedures in this document may require the following tools:

• Small flat-blade screwdriver

• Phillips screwdriver

• Small plastic scribe

Removing the Cover

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the screws that secure the cover to the computer.

3. Slide the computer cover towards the back of the computer.

4. Remove the computer cover.

Installing the Cover

1. Place the cover on the chassis.

2. Slide the computer cover towards the front of the computer.

3. Replace the screws that secure the cover to the computer.

4. Follow the procedures in

After Working Inside Your Computer

Removing the Front Bezel

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Pry the front bezel-retention clips away from the chassis.

4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.

Installing the Front Bezel

1. Place the hooks on the notches in the computer.

2. Rotate the front bezel towards the computer.

3. Press the front bezel till the tabs snap into place.

4. Replace the cover.

5. Follow the procedures in

After Working Inside Your Computer

Removing the Expansion Card

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Press the release tab on the card-retention latch.

4. Press on the release-lever to release the securing tab from the notch in the card.

5. Ease the card up and out of its connector and remove it from the computer.

Installing the Expansion Card

1. Place the card into it's socket and press it in till it snaps into place.

2. Secure the expansion card by pushing-in the card-retention latch till it snaps into place.

3. Replace the cover.

4. Follow the procedures in

After Working Inside Your Computer

Removing the System Fan

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Disconnect the fan cable from the system board.

4. Remove the screws that secure the fan to the back of the computer.

5. Remove the fan from the computer.

Installing the System Fan

1. Place the fan at it's location on the computer.

2. Replace the screws that secure the fan to the back of the computer.

3. Connect the fan cable to the system board.

4. Replace the cover.

5. Follow the procedures in

After Working Inside Your Computer

Removing the Memory

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Press down on the memory-retention tabs on each side of the memory module.

4. Lift the memory module out of the connector on the system board.

Installing the Memory

1. Press the memory module into it's connector on the system board till it snaps into place.

2. Replace the cover.

3. Follow the procedures in

After Working Inside Your Computer

Removing the Optical Drive

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Disconnect the data cable and power cable from the optical drive.

4. Remove the screws that secure the optical drive to the computer.

5. Slide the optical drive through the front of the computer.

Installing the Optical Drive

1. Slide the optical drive through the front of the computer.

2. Replace the screws that secure the optical drive to the computer.

3. Connect the data cable and power cable to the optical drive.

4. Replace the cover.

5. Follow the procedures in

After Working Inside Your Computer

Removing the Hard Drive

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Disconnect the SATA cable and power cable from the hard drive.

4. Remove the screws that secure the hard drive to the computer.

5. Remove the hard drive from the computer.

6. Remove the screw to release the brackets from the hard drive.

Installing the Hard Drive

1. Replace the screws to secure the brackets to the hard drive.

2. Replace the hard drive into the computer.

3. Replace the screws that secure the hard drive to the computer.

4. Connect the SATA cable and power cable to the hard drive.

5. Replace the cover.

6. Follow the procedures in

After Working Inside Your Computer

Removing the Wireless Local Area Network (WLAN) Card

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Disconnect the WLAN cables.

4. Remove the screw that secures the WLAN card to the connector.

5. Lift and remove the WLAN card from the computer.

Installing the Wireless Local Area Network (WLAN) Card

1. Place the WLAN card on its connector and push it in, to secure it to the connector.

2. Tighten the screw that secures the WLAN card to the connector.

3. Connect the WLAN cables.

4. Replace the cover.

5. Follow the procedures in

After Working Inside Your Computer

Removing the Card Reader

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the:

a) cover

b) front bezel

3. Disconnect the multimedia-card reader cable from the system board. Disengage the cable from the metal clip(s), if

present, that secure(s) the cable along the inside of the computer.

4. Remove the screws that secure the multimedia-card reader into the drive cage.

5. Slide the multimedia-card reader out through the front of the computer.

Installing the Card Reader

1. Slide the multimedia-card reader in through the front of the computer.

2. Replace the screws that secure the multimedia-card reader to the drive cage.

3. Route the cable thorough the metal clip(s), if present, to secure the cable along the inside of the computer.

4. Connect the multimedia-card reader cable to the system board.

5. Replace the:

a) front panel

b) cover

6. Follow the procedures in

After Working Inside Your Computer

Removing the Power Supply Unit (PSU)

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Disconnect the power-supply cables connected to the hard drive (s), optical drive (s), and system board.

4. Remove the screws that secure the power-supply unit to the back of the computer.

5. Press the release button located on the floor of the system chassis, and then slide the power-supply unit toward

the front of the computer.

6. Lift the power-supply unit and remove it from the computer.

Installing the Power Supply Unit (PSU)

1. Place the power-supply unit at it's location in the computer.

2. Slide the power-supply unit towards the back of the computer till it snaps into place.

3. Replace the screws that secure the power-supply unit to the back of the computer.

4. Connect the power supply cables to the hard drive (s), optical drive (s), and system board.

5. Replace the cover.

6. Follow the procedures in

After Working Inside Your Computer

Removing the Power Switch

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Disconnect and un-thread the power switch and hard-drive LED cable from the system board.

4. Remove the clip and the tabs holding the power switch/LED assembly from the computer.

Installing the Power Switch

1. Push the power switch/LED assembly into the computer till it snaps into place.

2. Connect the power switch and hard drive LED cable to the system board.

3. Replace the cover.

4. Follow the procedures in

After Working Inside Your Computer

Removing the I/O Panel

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Disconnect the audio cable and USB cable from the system board.

4. Un-thread the cable routing from the metal clips.

5. Remove the screw that secures the I/O panel to the computer.

6. Remove the I/O panel from the computer.

Page is loading ...

Dell 270 Owner's manual

Brand: Dell

Model: 270

Category: Mini PCs

Type: Owner's manual

Download PDF

report

Dell 270 Owner's manual

Dell 270 Owner's manual

Related papers

Other documents