AcuRite 06002RM/592TXR User manual

Instruction Manual

Tower Sensor

model 06002RM/592TXR

Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights

are the property of their respective owners. AcuRite uses patented technology.

Visit www.AcuRite.com/patents for details.

Printed in China

06002RM INST 060514

It’s More than Accurate, it’s

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

Plan your day with conﬁdence

™

www.AcuRite.com

Weather

Stations

Temperature

& Humidity

Weather

Alert Radio

Kitchen

Thermometers

& Timers

Clocks

SETUP

Features & Benets

OUTDOOR SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being sent to the

display unit.

3. Battery Compartment

4. A-B-C Switch

5. Battery Compartment Cover

Set the A-B-C Switch

The A-B-C switch is located inside

the battery compartment. It can

be set to A, B or C. However, you

must select the same letter choices

for both the sensor and the unit it is

being paired with in order for the

units to synchronize.

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries in

the outdoor sensor for the best

product performance. Heavy duty

or rechargeable batteries are not

recommended.

The sensor requires lithium

batteries in low temperature

conditions. Cold temperatures can

cause alkaline batteries to function

improperly. Use lithium batteries in

the sensor for temperatures below

-4ºF / -20ºC.

1. Slide off the battery

compartment cover. Take note

of the A-B-C switch setting inside

the battery compartment for

companion unit (not included)

setup.

2. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Sensor Setup

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.

Such modications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

At AcuRite, we proudly uphold our commitment

to quality technology. Chaney Instrument Co.

warrants that all products it manufactures to

be of good material and workmanship, and to

be free of defects when properly installed and

operated for a period of one year from the date

of purchase.

We recommend that you visit us at

www.AcuRite.com for the fastest way to register

your product. However, product registration

does not eliminate the need to retain your

original proof of purchase in order to obtain

warranty benets.

Chaney Instrument Co. warrants that all products it manufactures

to be of good material and workmanship, and to be free of

defects when properly installed and operated for a period of

one year from the date of purchase. Remedy for breach of this

warranty is limited to repair or replacement of the defective

item(s). Any product which, under normal use and service, is

proven to breach the warranty contained herein within ONE

YEAR from date of sale will, upon examination by Chaney,

and at its sole option, be repaired or replaced by Chaney.

Transportation costs and charges for returned goods shall

be paid for by the purchaser. Chaney hereby disclaims all

responsibility for such transportation costs and charges. This

warranty will not be breached, and Chaney will give no credit

for products it manufactures which have received normal wear

and tear, been damaged (including by acts of nature), tampered,

abused, improperly installed, damaged in shipping, or repaired

or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other

warranties, express or implied, and all other warranties are

hereby expressly disclaimed, including without limitation the

implied warranty of merchantability and the implied warranty

of tness for a particular purpose. Chaney expressly disclaims

all liability for special, consequential or incidental damages,

whether arising in tort or by contract from any breach of this

warranty. Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitation

or exclusion may not apply to you. Chaney further disclaims all

liability from personal injury relating to its products to the extent

permitted by law. By acceptance of any of Chaney’s products,

the purchaser assumes all liability for the consequences arising

from their use or misuse. No person, rm or corporation is

authorized to assume for Chaney any other liability in connection

with the sale of its products. Furthermore, no person, rm or

corporation is authorized to modify or waive the terms of this

paragraph, and the preceding paragraph, unless done in writing

and signed by a duly authorized agent of Chaney. This warranty

gives you specic legal rights, and you may also have other

rights which vary from state to state.

For in-warranty claims: Chaney Instrument Co.

965 Wells St., Lake Geneva, WI 53147

Limited One Year Warranty

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

IMPORTANT

PRODUCT MUST BE REGISTERED

TO RECEIVE WARRANTY SERVICE

►

Customer Support

AcuRite customer support is committed to providing you with best-in-class

service. For assistance, please have the model number of this product

available and contact us in any of the following ways:

(877) 221-1252

info@chaney-inst.com

24/7 support at www.AcuRite.com

► Installation Videos ► Register your Product

► Instruction Manuals ► Support User Forum

► Replacement Parts ► Submit Feedback & Ideas

Specications

Temperature Range:

-40°F to 158°F; -40°C to 70°C

Humidity Range:

1% – 99% RH (relative humidity)

Battery Requirements:

2 x AA alkaline or lithium batteries

Wireless Range

330’ / 100 m depending on home construction materials

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY

AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre,

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge

non-rechargeable batteries. DO NOT short-circuit the supply terminals.

A-B-C Switch

Install Batteries

2 AA batteries

A B C

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of the sensor is critical to the accuracy and performance of this

product.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions. Sensor is water

resistant and is designed for general outdoor use, however, to extend its life