AccuCold ACR45LCAL User manual

Brand: AccuCold

Model: ACR45LCAL

Category: Fridges

Type: User manual

This manual is also suitable for

AccuCold ACR45LCAL is a spacious frost-free refrigerator designed for built-in or freestanding use, offering flexible storage options for fresh food and beverages. With its adjustable shelves, door bins, and a dedicated crisper drawer, it provides ample space for organizing and preserving your groceries. The frost-free technology prevents ice buildup, ensuring consistent cooling performance and eliminating the need for manual defrosting. Its sleek design and compact size make it suitable for various kitchen layouts, providing both convenience and style.

FROST-FREE

REFRIGERATOR and FREEZER

MODEL NOS.

Refrigerator: ACR45L

Freezer: ACF33L

INSTRUCTION MANUAL

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

Felix Storch, Inc.

ISO 9001:2015 registered

770 Garrison Avenue

Bronx, NY 10474

www.summitappliance.com

Write Model and Serial Nos. (on lower left

corner of inside cabinet) here:

Model No.: _______________________

Serial No.: _______________________

TABLE OF CONTENTS

Appliance Safety

Important Safeguards

3-4

Location of Parts

Installation Instructions

6-8

Before Using Your Appliance

Installation of Your Appliance

Electrical Connection

6-7

Extension Cord

Reversing the Door Swing of Your Appliance

Installing the Stainless Steel Handle

Operating Your Appliance

8-12

Control Panel for ACR45L

8-9

Control Panel for ACF33L

9-10

Temperature Memory Function

Defrosting

Using the Freezer ACF33L

Door Alarm

Door Lock

Shelves

Thermometer / Alarm

11-12

Care and Maintenance

13-14

Cleaning Your Appliance

Power Failure

Vacations

Moving Your Appliance

Energy-Saving Tips

How to Remove the Thermometer / Alarm

Troubleshooting

15-16

Limited Warranty

APPLIANCE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This is the Safety Alert Symbol. The symbol alerts you to potential hazards that

can kill or injure you and others. All safety messages will follow the Safety

Alert Symbol and either the word DANGER or WARNING.

DANGER means that failure to heed this safety

statement may result in severe personal injury or

death.

WARNING means that failure to heed this safety

statement may result in extensive product

damage, serious personal injury, or death.

All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,

and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as

described in this manual, so read the manual carefully. To reduce the risk of fire,

electrical shock or injury when using the appliance, follow basic precautions,

including the following:

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do

not use an extension cord.

Replace all panels before operating.

It is recommended that a separate circuit serving only your appliance be provided. Use receptacles

that cannot be turned off by a switch or pull chain.

Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or

explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of

this or any other appliance. The fumes can create a fire hazard or explosion.

Do not connect or disconnect the electric plug when your hands are wet.

Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in

electrical shock or death.

Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in

this manual. All other servicing should be referred to a qualified technician.

This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is

environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the

greenhouse effect. Care must be taken during transportation and setting up of the appliance that no

partsof the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.

In the event of any damage:

- Avoid open flames and anything that creates a spark,

- Disconnect from the power supply,

- Air the room in which the appliance is located for several minutes, and

- Contact the Service Department for advice.

The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a

leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For

every ounce of coolant at least 325 cubic feet of room space is required. The amount of coolant in the

appliance is stated on the data plate inside the appliance. It is hazardous for anyone other than an

Authorized Service Person to carry out servicing or repairs to this appliance.

Take serious care when handling, moving and using the appliance to avoid either damaging the

refrigerant tubing or increasing the risk of a leak.

Replacing component parts and servicing shall be done by factory authorized service personnel, so as

to minimize the risk of possible ignition due to incorrect parts or improper service.

FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

Use two or more people to move and install appliance. Failure to do so can result in back or other

injury.

To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.

Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C).

The appliance should not be located next to ovens, grills or other sources of high heat.

The appliance must be installed with all electrical, water and drain connections in accordance with

state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in

accordance with the National Electrical Code and local codes and ordinances, is required.

Do not kink or pinch the power supply cord of the appliance.

The size of the fuse (or circuit breaker) should be 15 amperes.

It is important that the appliance be leveled in order to work properly. You may need to make several

adjustments to level it.

All installations must be in accordance with local plumbing code requirements.

Make certain that the pipes are not pinched, kinked or damaged during installation.

Check for leaks after connection.

Never allow children to operate, play with or crawl inside the appliance.

Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage

or discolor the interior.

Use this appliance only for its intended purpose as described in this Instruction Manual.

Keep fingers out of the “pinch point” areas. Clearances between the door and cabinet are necessarily

small. Be careful closing the door when children are in the area.

Risk of child entrapment!

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are

still dangerous, even if they will “just sit for a few days”.

Before discarding your old refrigerator:

Take off the doors

Leave the shelves in place so that children may not easily climb inside.

- SAVE THESE INSTRUCTIONS -

LOCATION OF PARTS

MODEL ACR45L – FROST-FREE REFRIGERATOR

MODEL ACF33L – FROST-FREE FREEZER

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.

Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This

will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Install the handle on the door, if it is not already attached. (See page 8.)

INSTALLATION OF YOUR APPLIANCE

The appliance is designed for built-in or recessed or free standing installation for indoor use only.

Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level the

unit, adjust the front leveling legs.

For free standing installation, 5” (127mm) of space between the back and sides of the unit, and 4”

(102mm) at the top, are suggested, which allows the proper air circulation to cool the compressor and

condenser. Even for built-in installation, it is a must to keep ¼” (6.35mm) space on each side and at the

top and 2” (51mm) at the rear. Take care that the air vent at the front of the appliance is never covered

or blocked in any way.

NOTE: It is recommended that you do not install the appliance near an oven, radiator or other heating

source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Don’t install in a location where the temperature will fall below 60°F (16°C). For best

performance, do not install the appliance behind a cabinet door or block the base grille.

Avoid locating the unit in moist areas.

Plug the appliance into an exclusive, properly grounded wall outlet.

ELECTRICAL CONNECTION

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped

with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of

electrical shock.

Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For

personal safety, this appliance must be properly grounded. Any questions concerning power and/or

grounding should be directed toward a certified electrician or an authorized service center.

This appliance requires a standard 115/120 Volt AC ~60Hz three-prong grounded electrical outlet. Have

the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it

replaced with a properly grounded 3-prong wall outlet.

To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or

dangling.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating

that matches the rating label on the appliance. This provides the best performance and also prevents

overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the

WARNING

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by a qualified electrician or an authorized service center.

appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use

a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance,

be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not

use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely

necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding

type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

REVERSING THE DOOR SWING OF YOUR APPLIANCE

This unit has the capability of the door opening from either the left or right side. The unit is delivered to

you with the door opening from the left side. Should you desire to reverse the opening direction, please

follow the reversal instructions shown below.

NOTE: All parts removed must be saved to allow the door swing to be reversed.

1. Remove the bottom hinge (2) by unscrewing the four lock screws (1).Be careful to hold the door firmly

after removing the screws. (Fig. 1)

2. Gently pull down to remove the door from the right top hinge and place it on a padded surface to avoid

the risk of damage. Then unscrew (3) and transfer the bottom hinge sleeve (4) to the opposite side.

(Figs. 1 & 4)

3. Unscrew and transfer the top hinge pin (5) to the opposite side. (Fig. 2)

4. Unscrew (7) and transfer the bottom hinge pin (6) to the opposite side of the bottom hinge (2).(Fig. 3)

5. Relocate the door to the designated position. Then screw the bottom hinge on the left designated

position and tighten it after the door is leveled. (Fig. 4)

6. Remove the handle from the left side of the door and install it on the right side. (See next section.)

INSTALLING THE HANDLE

This appliance includes a handle that is not required to operate the unit.

To install the handle, follow the instructions below:

1. Use a screwdriver to remove the screws on the side of door where the

handle is to be installed.

2. Align the handle with the screws removed in step # 1. Tighten the

screws using a Phillips head screwdriver until the handle is both flush

and secured tightly against the door side. (DO NOT over-tighten as

this will cause damage to the door surface.)

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 72º and

78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extremely cold or hot

conditions may cause interior temperatures to fluctuate. The operating temperature range may not be

reached.

CONTROL PANEL FOR ACR45L THERMOSTAT

ON/OFF Power

To turn the appliance ON or OFF, press the symbol and hold for 5 seconds.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

ºF/ºCSelector

Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from

Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.

Setting the Temperature Control

You can set the temperature by pressing the UP and DOWN symbols. When you press either of

the two buttons for the first time, the LED readout will show the original temperature set

previously. (The temperature preset at the factory is 39°F or 4°C.)

The temperature you are setting will increase by one degree each time you press the UP

symbol, and will decrease by one degree each time you press the DOWN symbol.

The range of set temperature settings is from 36°F to 43°F.

The display always shows the SET temperature. The SET temperature will flash if the actual

temperature deviates by more than 12°F from the SET temperature.

Interior Light

The interior light makes it easy to view your items. Pressing the LIGHT symbol toggles between

2 modes of operation for the internal lighting: functional (default) mode and showcase mode. If

you are in functional (default) mode, the lights will turn on only when the door is open. If you are

in showcase mode, the lights will be on whether or not the door is open.

CONTROL PANEL FOR ACF33L

ON/OFF Power

To turn the appliance ON or OFF, press and hold the POWER key for 5 seconds.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

SuperFreeze

SuperFreeze is used to freeze the stored items quickly. The function overrides the thermostat

control and will make the compressor operate continuously. It is not necessary to adjust the

thermostat setting when using this function. When the function is selected, the SuperFreeze

indicator (The dot at the bottom right of the display) will be ON. The function can be canceled by

pressing the key again and the indicator will turn OFF. SuperFreeze will turn off automatically after

8 hours.

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

ºF/ºCSelector

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature

from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the SUPERFREEZE key

for 5 seconds.

Setting the Temperature Control

You can set the temperature by pressing the UP and DOWN keys. When you press either of the

two keys for the first time, the LED readout will show the original temperature set previously.

(The temperature preset at the factory is -4°F, or -20°C.)

The temperature you are setting will increase by one degree each time you press the UP key,

and will decrease by one degree each time you press the DOWN key.

The range of the temperature settings is from -11°F to 11°F.

The display always shows the SET temperature. The SET temperature will flash if the actual

temperature deviates by more than 12°F from the SET temperature.

InteriorLight

The unit is equipped with an interior LED light which will be turned ON when the door is open.

TEMPERATURE MEMORY FUNCTION

In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the

previous temperature settings, and when the power is recovered, the cabinet temperature will return

to the same setting temperature as before the power went off.

DEFROSTING

The unit defrosts automatically in normal operating conditions.

The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the

drainage channel behind the rear wall of the unit, and flows through the drainage hole into the drip tray

by the compressor where it evaporates.

However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high

humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual

defrosting.

USING THE FREEZER FOR ACF33L

This unit is designed for the long-term storage of frozen items. It is also suitable for the storage of

medicine and medical products that need to be stored frozen. Storage time is up to three months.

The storage life of frozen foods varies and the recommended storage time should not be exceeded.

Pre-packed commercially frozen food should be stored in accordance with the frozen foods

manufacturer’s instructions for a three star frozen food storage compartment or home freezer.

Place frozen food into the freezer as quickly as possible after purchase. If there are instructions on the

packet, carefully follow these instructions regarding storage times.

NOTE:

If the unit is unplugged, or power is lost or turned off, you must wait 5 minutes before restarting

the unit. If you attempt to restart before this time delay, the unit will not start.

When you use the unit for the first time or restart the unit after it has been shut off for a long time,

there could be a few degrees variance between the temperature you select and the one indicated

on the Alarm/Thermometer readout. This is normal and is due to the length of the activation time.

There should not be a problem once the unit has been running for a few hours.

DOOR ALARM

If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the POWER key

once or closing the door can switch off the audible alarm.

DOOR LOCK

Your unit is provided with a lock and key combination.

The keys are located inside the plastic bag that contains the Instruction Manual. Insert the key into the

lock and turn it counter-clockwise to unlock the door. To lock the door, do the reverse operation, making

sure the metal pin is engaged completely. Remove the key and put it in a secure place for safekeeping.

SHELVES

To prevent damaging the door gasket, make sure to have the door all the way open when pulling the

shelves out of the rail compartment.

The top and bottom shelves can be removed to store larger

items.

When removing a shelf from the rail compartment, make

sure to remove all stored items first. Then move the shelf

to the position where the notch of the shelf is exactly under

the plastic post and lift the shelf. In order to replace the

shelf, repeat steps described above in reverse.

The center shelf is fixed in place and cannot be removed.

This is because the glass bead filled bottle that contains the temperature sensor for your

Thermometer/Alarm is best stored in this location. The center of your refrigerator or freezer will provide

the most accurate temperature readings. For proper temperature monitoring, keep the bottle in place

and do not remove this shelf.

THERMOMETER / ALARM

The unit is equipped with a thermometer/alarm that simultaneously displays minimum, maximum, and

current interior temperatures and provides a visual and audible signal when the temperature inside the

unit falls outside the set temperature range.

The temperature sensor, or probe, is enclosed in a glass bead filled bottle that is stored inside your unit in

a special shelving compartment.

Function of Controls

MODE/RESET Key: Press ONCE to reset Max/Min temperature record. When the unit is sounding an

alarm, press ONCE to turn off the beeping sound.

HI/LO Key: Press ONCE to display high alarm setting. Press TWICE to display low alarm setting. Press

THREE TIMES to display current temperature reading.

ºF/ºC Key: Press this button to change the temperature display scale from Fahrenheit (ºF) to Celsius (ºC).

Battery Installation

Remove battery compartment cover located on the rear of the unit and remove insulation strip from battery

compartment. Following the polarity (+/-) diagram in the battery compartment, install the battery. Replace

the battery cover. The unit will beep and all segments of the LCD will be activated.

Programming the Alarms

The thermometer displays the internal temperature of the unit being monitored, as well as the maximum

and minimum temperatures reached. The maximum and minimum readings reflect the highest and lowest

temperatures since the battery was inserted or since the MODE/RESET key was last pressed. If the

temperature rises above or falls below the set temperature range, the alarm will sound. By default, the high

alarm temperature setting is 8°C (46.4°F) and the low alarm temperature setting is 2°C (35.6°F). To reset

these limits, follow these instructions:

High Alarm Temperature Setting: Press the HI/LO key ONCE, then press MODE/RESET to enter the High

Alarm temperature setting mode. Use the Up and Down arrows to adjust the temperature accordingly. Press

MODE/RESET once again to confirm the setting.

Low Alarm Temperature Setting: Press the HI/LO key TWICE, then press MODE/RESET to enter the Low

Alarm temperature setting mode. Use the Up and Down arrows to adjust the temperature accordingly. Press

MODE/RESET once to confirm the setting.

By default, the low and high alarms should be audible. To turn alarms on/off:

Audible High Alarm Setting: To make sure the high alarm is audible, press HI/LO key ONCE (to activate

HI-SET on the screen). Then press the ALERT ON/OFF key ONCE to activate the HIGH-ALARM beeping

sound. Press again to deactivate.

Audible Low Alarm Setting: To make sure that the low temperature alarm is audible, press the HI/LO key

TWICE to activate LOW-SET on the screen. Then press the ALERT ON/OFF key ONCE to activate the

LOW-ALARM beeping sound. Press again to deactivate.

NOTE: Set high and low alarm temperature limits above and below the refrigerator/ freezer operating

temperature to prevent false alarms. For operating temperature ranges, see Setting the Temperature

Control on page 9 for refrigerator and 10 for freezer.

NOTE: For an activated high alarm and low alarm buzzer, the display should indicate HI-ALARM and LO-

ALARM (see illustration on previous page).

More details about the features and usage of the Thermometer/Alarm can be found in the User

Manual accompanying the unit.

CARE AND MAINTENANCE

CLEANING YOUR APPLIANCE

Turn off the power, unplug the appliance, and remove all items, including shelves.

Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking

soda to a quart of water).

Wash the shelves with a mild detergent solution.

Wring excess water out of the sponge or cloth when cleaning the area where the controls are located,

or any electrical parts.

Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a

clean soft cloth.

Use an approved stainless steel cleaner to clean the door and handle. Do not use steel wool or a steel

brush on the stainless steel.

CAUTION:

Failure to unplug the appliance during cleaning could result in electrical shock or other personal injury

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of your appliance

if you minimize the number of times the door is opened. If the power is going to be off for a longer period

of time, you need to take the proper steps to protect the contents.

VACATIONS

Short vacations: Leave the appliance operating during vacations of less than three weeks.

Long vacations: If the appliance will not be used for several months, remove all items and turn off the

appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door

open slightly, blocking it open if necessary.

MOVING YOUR APPLIANCE

1. Remove all items.

2. Securely tape down all loose items (shelves) inside your appliance.

3. Turn the adjustable legs up to the base to avoid damage.

4. Tape the door shut.

5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the

outside of the appliance with a blanket or similar item.

ENERGY-SAVING TIPS

The appliance should be located in the coolest area of the room or outdoor location, away from heat-

producing appliances and out of direct sunlight.

Ensure that the unit is adequately ventilated. Never cover air vents.

Do not keep the door open any longer than necessary.

Let hot foods cool to room temperature before placing in the unit. Overloading the unit forces the

compressor to run longer.

Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts down

on frost build-up inside the unit.

Unit shelves and storage bins should not be lined with aluminum foil, wax paper, or paper toweling.

Liners interfere with cold air circulation, making the unit less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many items as

needed at one time, and close the door as soon as possible.

HOW TO REMOVE THE THERMOMETER / ALARM

If you need to disconnect the thermometer / alarm, please follow these steps:

1. Gently pull out the Thermometer / Alarm (1) and then disconnect it from the temperature sensor cable.

(Fig. 1)

2. Unscrew the three screws (2) and (7) to remove the shelf cover (3) and the glass bottle holder (6). Be

careful to hold the glass bottle holder (6) and temperature sensor glass bottle (5) firmly after removing

the screws. (Fig. 3)

3. Gently pull the temperature sensor head (4) out of the glass bottle (5).

4. Unscrew the screws (8) to remove the cable cover (9). (Fig. 2)

5. Now you can dismantle the temperature sensor cable (4) from the unit.

TROUBLESHOOTING

You can solve many common problems easily, saving you the cost of a possible service call. Try the

suggestions below to see if you can solve the problem before calling the servicer.

PROBLEM

POSSIBLE CAUSE

REMEDY

Appliance

does not

operate.

Appliance is not connected to a power

supply.

The appliance is turned off.

Tripped circuit breaker or a blown fuse.

Connect the appliance.

Switch on the appliance.

Switch on circuit breaker or replace

fuse.

Appliance is

not cold

enough.

The temperature is not set correctly.

The ambient temperature could require

a lower temperature setting.

The door was opened too often.

The door was not closed completely.

Door is not hermetically sealed.

The condenser is too dirty.

The ventilation opening is blocked or too

dusty.

Check the set temperature.

Set a lower temperature.

Do not open the door more often than

necessary.

Close door properly.

Check the door seal and clean or

replace.

Clean the condenser when

necessary.

Clear the obstructions and clean the

dust.

Appliance

turns itself on

and off

frequently.

The room temperature is higher than

average.

A large amount of food has been added

to the unit.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Put the appliance in a cooler place.

Leave the appliance to work for a

while until the set temperature has

been reached.

Do not open the door more often than

necessary.

Close door properly.

Check the door seal and clean or

replace.

The light does

not work.

Appliance is not connected to a power

supply.

Tripped circuit breaker or a blown fuse.

The light was switched off on the

control panel.

Connect the appliance.

Switch on circuit breaker or replace

fuse.

Switch on the light.

Vibrations

The appliance is not properly leveled.

Level the appliance with the

adjustable feet.

The appliance

seems to

make too

much noise.

The rattling noise may come from the flow of the refrigerant, which is normal. As each

cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your

appliance.

If temperature fluctuations occur, the contraction and expansion of the inner walls

may cause popping and crackling noises.

The appliance is not properly level.

Level the appliance with the

adjustable feet.

The door will

not close

properly.

The appliance is not properly level.

The door was reversed and not

properly installed.

The gasket is dirty.

The shelves are out of position.

Level the appliance with the

adjustable feet.

Check the door hinge and

reassemble correctly.

Clean the door gasket.

Check the shelves and refit correctly.

Display “E0”,

“E0” indicates a communication error

Call for service.

“E1”. “E2”,

“E3”, “E4”,

“E5” or “E7”.

for 3-zone models.

“E1” or “E2” indicates that the air

temperature sensor has failed.

“E3” or “E4”indicates that the defrost

sensor in the evaporator has failed.

“E5” indicates a defrost heater failure.

“E7” indicates a door switch failure.

The alarm

sounds and

the

temperature

display

flashes.

Has the appliance door been open for

longer than 60 seconds? If not, then the

temperature has risen higher or fallen

lower than the temperature that has been

set. This could be due to:

The appliance door being opened too

often.

The ventilation opening being covered

or too dusty.

A lengthy interruption in the power

supply.

A large amount of content has been

added to the unit.

If yes, close the door.

Do not open the door more often than

necessary.

Clear the obstructions and clean the

dust.

Leave the appliance to work for a

while until the set temperature has

been reached.

The icon “--” is

lit and flashing

in the

temperature

display.

The display temperature is out of

range.

Only temperatures within the range

0~99°F/-9~37°Cfor ACR45L and the

range -49~99°F/-45~37°C for

ACF33Lcan be displayed. If the

temperature is not within this range,

the icon “--” will be displayed instead.

This is normal.

If you've checked the table above and find that you still need help with your appliance, call our Customer

Service facility at 800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to answer your

questions.

NOTES

LIMITED WARRANTY

ONE-YEAR LIMITED WARRANTY

Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is

operated and maintained according to instructions attached to or furnished with the product, warrantor will

pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service

must be provided by a designated service company. Outside the 48 states, all parts are warranted for one

year from manufacturing defects. Plastic parts, shelves and cabinets are warranted to be manufactured to

commercially acceptable standards, and are not covered from damage during handling or breakage.

ITEMS WARRANTOR WILL NOT PAY FOR:

1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to

replace or repair fuses or to correct wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as

filters) are excluded from warranty coverage.

3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper

installation, installation not in accordance with electrical or plumbing codes, or use of products not

approved by warrantor.

4. Replacement parts or repair labor costs for units operated outside the United States.

5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

6. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not

installed in accordance with published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE

PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR.

WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS,

WHICH VARY FROM STATE TO STATE.

WARNING: This product can expose you to chemicals including Nickel

(Metallic) which is known to the State of California to cause cancer, birth

defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

Note: Nickel is a component in all stainless steel and some other metallic compositions.

FELIX STORCH, INC.

770 Garrison Avenue

Bronx, NY 10474

Phone: (718) 893-3900

Fax: (718) 842-3093

www.summitappliance.com

For parts and accessory ordering,

troubleshooting and helpful hints, visit:

www.summitappliance.com/support

FELIX STORCH, INC.

770 Garrison Avenue

Bronx, NY 10474

Phone: (718) 893-3900

Fax: (844) 478-8799

www.summitappliance.com

Printed in China

AccuCold ACR45LCAL User manual

Brand: AccuCold

Model: ACR45LCAL

Category: Fridges

Type: User manual

This manual is also suitable for

Download PDF

report

AccuCold ACR45LCAL User manual

This manual is also suitable for

AccuCold ACR45LCAL User manual

Related papers

Other documents