THANK YOU

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this faucet. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products

available for your home improvement needs. Thank you for choosing Glacier Bay!

USE AND CARE GUIDE

PULL-OUT KITCHEN FAUCET

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

Table of Contents ....................................................... 2

Safety Information ..................................................... 2

Warranty.....................................................................2

Pre-Installation ..........................................................3

Installation .................................................................5

existing faucet or replacing any part of the faucet.

Open the faucet handle to relieve water pressure and

ensure that water is completely shut off.

2. Cover the drain in your sink to avoid losing parts.

WARNING: Avoid contact of plastic parts with plumber’s

putty, pipe dope, or any other oil-based compound.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province.

Contact the Customer Service Team at 1-855-HD-GLACIER or visit HOMEDEPOT.COM/GLACIERBAY.

Please contact 1-855-HD-GLACIER for further assistance.

PLANNING INSTALLATION

Before you begin to install this product, ensure that all parts are present. Compare parts with the package

contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service for

66°C (150°F) 80°C (175°F) 15°C (60°F)

Working Pressure

3 BAR (45 PSI) 5 BAR (75PSI) 0.5 BAR (7PSI)

In case of pressures over 5 BAR (~75 PSI), a pressure reducer is recommended. Before proceeding with the

assembly, purge the hot and cold water pipes so as to avoid the accumulation of dirt and impurities that could affect

the function of the tap.

TOOLS REQUIRED

Adjustable

Wrench

Phillips

screwdriver

Silicone

Sealant

Sealant

Tape

PACKAGE CONTENTS

A

E

D

Part Description Quantity

A Faucet body 1

B Deckplate 1

C Baseplate 1

J Flex pipe washer (preassembled to Faucet body (A)) 1

K Flex pipe (preassembled to Faucet body (A)) 1

L Supply hose 2

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

□ Purge the hot and cold water pipes to avoid

the accumulation of dirt and impurities.

□ Shut off the water supply.

□ If necessary, remove the old faucet and clean

washer (E), and rubber washer (D) from the

faucet body (A).

hole in the sink and insert the faucet body (A)

and hose connections through the sink.

□ Place the deckplate (B) and baseplate (C) over

the installation holes in the sink and insert

the faucet body (A) into the deckplate (B) and

through the sink.

Installation (continued)

□ Attach the faucet body (A) from underneath

the sink using the rubber washer (D), metal

washer (E), and lock nut (F).

water outlet and the right supply pipe (L) to the

cold water outlet.

pipe (K) positioning the washer (J) in between.

(H) and attach the weight (I) to the hose (H).

Please contact 1-855-HD-GLACIER for further assistance.