VIZIO VO320E User Manual
Dear VlZIO Customer,
Congratulations on your new VlZlO VO320E television purchase. Thank
you for your support. For maximum benefit of your set, please read these
instructions before making any adjustments, and retain them for future
reference. We hope you will experience many years of enjoyment from
your new VlZIO HDTV High Definition Television.
For assistance, please call (877) 668-8462 or e-mail us at www.vizio.com.
To purchase or inquire about accessories and installation services for your
VlZlO HDTV, please visit our website at www.vizio.com or call toll free at
(888) 849-4623.
We recommend you register your VlZlO HDTV either at our website
www.VlZlO.com or fill in your registration card and mail it in. For peace
of mind and to protect your investment beyond the standard warranty,
VlZlO offers on-site extended warranty service plans. These plans give
additional coverage during the standard warranty period. Visit our website
or call us to purchase a plan.
Write down the serial number located on the back of your HDTV.
Purchase Date
SrS
TruSurround HD
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and "High Definition Multimedia Interface" are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS; IMAGES USED ARE FOR
ILLUSTRATION PURPOSES ONLY. BRAVO, VIZIO AND THE V LOGO AND WHERE VISION MEETS VALUE AND OTHER VIZIO
TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC. PRODUCT SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT NOTICE OR OBLIGATION. © 2008 VIZIO INC. ALL RIGHTS RESERVED.
Version 1/22/2009 1
www.VlZlO.com
VIZIO VO320E User Manual
Impor an Safet-v Instructions
Your HDTV is designed and manufactured to operate within defined design limits, and misuse
may result in electric shock or fire. To prevent your HDTV from being damaged, the following
rules should be observed for the installation, use, and maintenance of your HDTV. Read the
following safety instructions before operating your HDTV. Keep these instructions in a safe place
for future reference.
To reduce the risk of electric shock or component damage, switch off the power before
connecting other components to your HDTV.
Unplug the power cord before cleaning your HDTV. A damp cloth is sufficient for cleaning your
HDTV. Do not use a liquid or a spray cleaner for cleaning your HDTV. Do not use abrasive
cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving your HDTV from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your HDTV to avoid causing fire,
electric shock, or component damage.
Use only with the cart, stand, tripod, bracket, or table specified by manufacturer or sold with your
HDTV. When a cart is used, use caution when moving the cart/HDTV combination to avoid injury
from tip-over. Do not place your HDTV on an unstable cart, stand, or table. If your HDTV falls, it
can injure a person and cause serious damage to your HDTV. Use only a cart or stand
recommended by the manufacturer or sold with your HDTV.
A distance of at least 3 feet should be maintained between your HDTV and any heat source, such
as a radiator, heater, oven, amplifier etc. Do not install your HDTV close to smoke. Operating
your HDTV close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your HDTV and to protect it from overheating, be sure these openings are
not blocked or covered. Do not place your HDTV in a bookcase or cabinet unless proper
ventilation is provided.
Never push any object into the slots and openings on your HDTV cabinet. Do not place any
objects on the top of your HDTV. Doing so could short circuit parts causing a fire or electric shock.
Never spill liquids on your HDTV.
Your HDTV should be operated only from the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home, consult your dealer or local power
company.
Do not apply pressure or throw objects at your HDTV. This may compromise the integrity of the
display. The manufacturer's warranty does not cover user abuse or improper installations.
The power cord must be replaced when using different voltage than the voltage specified. For
more information, contact your dealer.
Your HDTV is equipped with a three-pronged grounded plug (a plug with a third grounding
pin). This plug will fit only into a grounded power outlet. This is a safety feature. If
your outlet does not accommodate the three-pronged, have an electrician install
the correct outlet, or use an adapter to ground your HDTV safely. Do not defeat
the safety purpose of the grounded plug.
When connected to a power outlet, power is always flowing into your HDTV. To
totally disconnect power, unplug the power cord.
/_\., • The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-isolated, dangerous
voltage within the inside of your HDTV that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and servicing instructions in the literature
accompanying your HDTV.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
2
www.VlZlO.com
VIZIOVO320EUserManual
• ThewallsocketshouldbeinstallednearyourHDTVandeasilyaccessible.
• OnlypowerofthemarkedvoltagecanbeusedforyourHDTV.Anyothervoltagethanthe
specifiedvoltagemaycausefireorelectricshock
• Donottouchthepowercordduringlightning.Toavoidelectricshock,avoidhandlingthepower
cordduringelectricalstorms.
• UnplugyourHDTVduringalightningstormorwhenitwillnotbeusedforlongperiodoftime.
ThiswillprotectyourHDTVfromdamageduetopowersurges.
• DonotattempttorepairorserviceyourHDTVyourself.Openingorremovingthebackcovermay
exposeyoutohighvoltages,electricshock,andotherhazards.Ifrepairisrequired,contactyour
dealerandreferallservicingtoqualifiedservicepersonnel.
• KeepyourHDTVawayfrommoisture.DonotexposeyourHDTVtorainormoisture.Ifwater
penetratesintoyourHDTV,unplugthepowercordandcontactyourdealer.Continuoususein
thiscasemayresultinfireorelectricshock.
• DonotuseyourHDTVifanyabnormalityoccurs.Ifanysmokeorodorbecomesapparent,unplug
thepowercordandcontactyourdealerimmediately.DonottrytorepairyourHDTVyourself.
• Avoidusingdroppedordamagedappliances.IfyourHDTVisdroppedandthehousingis
damaged,theinternalcomponentsmayfunctionabnormally.Unplugthepowercordimmediately
andcontactyourdealerforrepair.ContinueduseofyourHDTVmaycausefireorelectricshock.
• DonotinstallyourHDTVinanareawithheavydustorhighhumidity.OperatingyourHDTVin
environmentswithheavydustorhighhumiditymaycausefireorelectricshock.
• FollowinstructionsformovingyourHDTV.Ensurethatthepowercordandanyothercablesare
unpluggedbeforemovingyourHDTV.
• WhenunpluggingyourHDTV,holdthepowerplug,notthecord.Pullingonthepowercordmay
damagethewiresinsidethecordandcausefireorelectricshock.WhenyourHDTVwillnotbe
usedforanextendedperiodoftime,unplugthepowercord.
• Toreduceriskofelectricshock,donottouchtheconnectorwithwethands.
• Insertbatteriesinaccordancewithinstructions.Incorrectpolaritiesmaycausethebatteriesto
leakwhichcandamagetheremotecontrolorinjuretheoperator.
• Ifanyofthefollowingoccurs,contactthedealer:
o Thepowercordfailsorfrays.
o LiquidspraysoranyobjectdropsintoyourHDTV.
o YourHDTVisexposedtorainorothermoisture.
o YourHDTVisdroppedordamagedinanyway.
o TheperformanceofyourHDTVchangessubstantially.
Version1/22/2009 3
www.VlZlO.com
VIZIOVO320EUserManual
TeLevision Flnt-enna Connection Protection
External. Tel.evision Rnt'enna Gr'ounclincj
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during
a lightning storm or when it is left
unattended or unused for long periods
of time, unplug the TV from the wall
outlet and disconnect the antenna or
cable system.
Power Lines
Do not locate the antenna near
overhead light or power circuits, or
GROUND CLAMP ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NECSECTIOM810-20)
GROUNDING CONDUCTORS (NECS_CTION810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT _ POWER SERVICE GROUNDING ELECTRODE SYSTEM (NECAeT2_0,PAeTH)
where it could fall into such power lines or circuits.
Remember, the screen of the coaxial cable is intended to be connected to earth in the building
installation.
FEE BuLLet'in ffor- New TU Owners
After February 17, 2009, a television receiver with only an analog broadcast tuner will require a
converter box to receive full power over-the-air broadcasts with an antenna because of the
Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before to
receive low power, Class A or translator television stations and with cable and satellite TV
services, gaming consoles, VCRs, DVD players, and similar products.
Information about the DTV transition is available from http://www.DTV.qov or this manufacturer at
877 MY VIZIO (877-698-4946), and from http://www.dtv2009.qov or 1-888-DTV-2009 for information
about subsidized coupons for digital-to-analog converter boxes.
Your HDTV comes with a built-in tuner capable of processing digital broadcasts, making it easier
for you to receive this type of signal without the need of an extra converter box.
4
www.VlZlO.com
VIZIOVO320EUserManual
Table of Contents
Chapter i Basic Cont-ro[s and Connections ..........................................................io
Front Panel .................................................................................................................................................................. 10
Side Panel Controls ..................................................................................................................................................... 10
Rear Panel Connections .............................................................................................................................................. 11
Right-Side Panel Connection ....................................................................................................................................... 12
VIZIO Remote Control .................................................................................................................................................. 13
Insertion of Batteries in the Remote Control ................................................................................................................ 14
Remote Control Range ................................................................................................................................................ 14
VIZIO Remote Control Precautions .............................................................................................................................. 14
Chapter _. Connecting Equipment ........................................................................... 1 5
Which Video Connection Should I Use? ...................................................................................................................... 15
Connecting Your Cable or Satellite Box ....................................................................................................................... 16
Connecting Coaxial (RF) .............................................................................................................................................. 19
Connecting Your DVD Player ....................................................................................................................................... 20
Connecting Your VCR or Video Camera ...................................................................................................................... 22
Connecting an external Receiver/Amp ........................................................................................................................ 23
Optical Output of Audio received with HD Programs .................................................................................................... 23
Connecting a PC Computer ......................................................................................................................................... 24
Preset PC Resolutions ................................................................................................................................................. 25
Resolution through RGB Input ..................................................................................................................................... 25
Chapter 3 Usinq your HDTV the first time ............................................................. 86
Watching a TV Program ............................................................................................................................................... 31
Adjusting Basic HDTV Settings .................................................................................................................................... 32
Chapter 4 Rdvanced Rd]ustment of- HDTV ............................................................ 33
DTV / TV Input Picture Adjustment .............................................................................................................................. 34
Picture Mode ................................................................................................................................................................ 34
Advanced Video Features ............................................................................................................................................ 36
Film Mode .................................................................................................................................................................... 37
Reset Picture Mode ...................................................................................................................................................... 37
DTV / TV Input Audio Adjustment ................................................................................................................................ 38
Audio Mode .................................................................................................................................................................. 38
Analog Audio Out ......................................................................................................................................................... 39
Lip Sync ....................................................................................................................................................................... 39
Reset Audio Mode ........................................................................................................................................................ 40
DTV / TV Tuner Setup .................................................................................................................................................. 40
Tuner Mode .................................................................................................................................................................. 40
Auto Search ................................................................................................................................................................. 40
Partial Channel Search ................................................................................................................................................ 41
Skip Channel ................................................................................................................................................................ 41
MTS ............................................................................................................................................................................. 41
Time Zone .................................................................................................................................................................... 41
Daylight Saving ............................................................................................................................................................ 42
Channel Info ................................................................................................................................................................. 42
DTV / TV Input Setup ................................................................................................................................................... 42
Language ..................................................................................................................................................................... 42
Sleep Timer .................................................................................................................................................................. 42
Wide ............................................................................................................................................................................. 42
Input Namin( ................................................................................................................................................................ 43
CC (Closed Caption) .................................................................................................................................................... 44
HA/Position ................................................................................................................................................................. 45
DTV / TV Input Parental Control ................................................................................................................................... 46
System Info .................................................................................................................................................................. 50
System Reset ............................................................................................................................................................... 50
HDMI Input Picture Adjustment .................................................................................................................................... 51
HDMI Input Audio Adjustment ...................................................................................................................................... 51
HDMI Input Setup ......................................................................................................................................................... 51
Video Input Picture Adjustment .................................................................................................................................... 52
Video Input Audio Adjustment ...................................................................................................................................... 52
Video Input Setup ......................................................................................................................................................... 52
Auto Phase (for Component input) ............................................................................................................................... 53
Version 1/22/2009 5
www.VlZIO.com
VIZIOVO320EUserManual
Video Input Parental Control ........................................................................................................................................ 53
PC Input Picture Adjustment ........................................................................................................................................ 53
Auto Adjust ................................................................................................................................................................... 53
PC Input Audio Adjustment .......................................................................................................................................... 54
PC Input Setup ............................................................................................................................................................. 54
Understanding Viewing Features ................................................................................................................................. 55
Viewing Modes ............................................................................................................................................................. 55
Chapter 5 Maintenance and Troubl.eshooting ...................................................... 5 6
Maintenance ................................................................................................................................................................ 56
Troubleshooting Guide ................................................................................................................................................. 57
Telephone & Technical Support ................................................................................................................................... 59
Compliance .................................................................................................................................................................. 60
FCC Class B Radio Interference Statement ................................................................................................................. 60
Chapter 6 Misoel.l.aneous Information ..................................................................... 61
Specifications ............................................................................................................................................................... 61
Glossary- Standard Definitions ................................................................................................................................... 62
6
www.VlZlO.com
VIZIOVO320EUserManual
Openinq the Packaqe
Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been
designed to protect it from transportation damage. Once you have opened the carton, check that your
HDTV is in good condition and that all of the contents are included.
The glass surface can easily be scratched or broken, so handle your HDTV gently and never place your
HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and
packing material for future shipping.
Paokaqe Contents
• VIZIOVO320E
• Stand and thumb screw
• VIZIO remote control VR2
• AA batteries for the remote
control (2)
• Power cord
• This user manual
• Quick Setup Guide
• Registration Card
Rdditional. certified accessories for your HDTU are sold
separatel,v:
• Wall mounts
• High Definition cables
• Extra or replacement remote
VlZlO also offers installation services and extended warranty services for your HDTV.
To purchase or inquire about additional accessories and services for your VIZIO HDTV, visit our web site
at www.VIZIO.com or call us toll free at 888-VIZIOCE (888-849-4623)
Caution: Do not apply pressure or throw objects at your HDTV. This may compromise the integrity
of the display. The manufacturer's warranty does not cover user abuse or improper installations.
Version 1/22/2009 7
www.VlZlO.com
VIZIOVO320EUserManual
TU Set-up and St-and Rssembl. v
Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
To unpack t-he TV and st'and base:
1. Remove the remote control, batteries, and power cord from the foam end caps.
2. Remove the two top foam end caps.
3. Remove the stand base under foam end cap.
4. Remove the TV from the box and lay it face down on a clean, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.
To at-bach t-he TV st-and base:
1. Push the stand base onto the stand neck (already connected to TV).
2. On the bottom of the base, insert the thumb screw and tighten.
3. Move the TV into an upright
position.
Vizio TV
(back)
Stand Neck
(already attached
to TV)
Bottom view
Stand
8
www.VlZlO.com
VIZIO VO320E User Manual
Set"t-ing Up Your- HDTL/
• Read this user manual carefully before installing your HDTV.
• The power consumption of your HDTV is about 84.5W. Use the included power cord. When an
extension cord is required, use one with the correct power rating. The cord must be grounded and
the grounding feature must not be compromised.
• Your HDTV should be installed on a flat surface to avoid tipping.
• For proper ventilation, you must allow space between the back of your HDTV and the wall.
• If you want to mount your HDTV on the wall, see below for additional information.
• Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
• Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Contact VIZIO for more information on these services at
888-VIZIOCE (888-849-4623) or www.VIZIO.com.
Wal.I. Mounting vour- HDTV
Your HDTV can be mounted on the wall for viewing. If
you choose to mount your HDTV on the wall, follow the
instructions below.
,
,
If the base has been attached, remove the base:
a. Disconnect the cables from your HDTV.
b. Place your HDTV face down on a soft, fiat
surface to prevent damage to the screen.
c. Remove the eight (8) screws holding the
stand neck to your HDTV..
Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount (sold
separately) using the mounting holes in the
back panel of your HDTV.
b. Read the instructions that came with your
specific wall mount to properly hang your HDTV.
iiiiiiiii ii
_i_iiiiiiiiiiiiiiii_iiiiiii_i i!!__ii
W O
•_ iiiiiiiiiii_!iiiii_iii_iiiiiiiiiiiiiiiili_i!i_iiii
J
Version 1/22/2009 9
www.VlZlO.com
VIZIOVO320EUserManual
Chapt-er i Basic Cont-ro[s and Connect-ions
Front- Pane[
1. POWER 'VlZIO' LIGHT-
The VIZIO name lights white
when powered on and orange
when powered off.
2. REMOTE CONTROL
SENSOR - This is the
window through which all of
the remote control signals
pass to the sensor. Point the
remote control directly at this
window for the best response
to the remote signal.
MENU
CH A
EH V (_
UOL+
VOL-
INPUT
Side Panel. Eont-rol.s
POWER ( _ ) - Switch the HDTV on by pressing the button once. Press the
button again to the HDTV off.
MENU - This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will proceed to the next level.
CH + / - - Use these buttons to step up or down the TV channels. While the OSD is
active, these buttons function as up and down controls in the OSD menus.
VOL + / - - Use these buttons to increase or decrease to the speaker volume.
While the OSD is active, these buttons function as left and right controls in the OSD
menus.
Input
INPUT (ENTER) - Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV1/S-Video, AV2, Component1, Component2, RGB, HDMI 1,
and HDMI 2. Once you have stepped through the entire
sequence, you will return to the beginning. If a sub-menu is
active, pressing this button will return to the previous menu
level.
Additionally, when the OSD is active, this button confirms the
menu function to be adjusted. When the OSD is not active, pressing this button will display the current
input mode.
10
www.VlZlO.com
VIZIOVO320EUserManual
Rear Pane[Connections
[]
HDMI 1
RGB PC
S-VIDEO/AV1 IN
DTV/TV
OPTICAL
DIGITAL AUDIO
OUT
ANALOG
AUDIO OUT
HDMI 2
COMPONENT1
(YPb/CbPr/Cr
with Audio L/R)
Plug an HDMI device into this port
Connect the video and audio from a computer here. A 1/8" plug stereo cable is
needed to connect the audio out from the computer to the connector in the rear
of the TV for audio from computer.
Connect the primary source for composite video devices, such as a VCR or
video game. Use the white and red connectors to connect the external audio
from the same source, then use the S-Video or yellow connector to connect the
external video from the same source. The S-Video, if connected, will take
priority over AV RCA (yellow) connector.
Connect to an antenna or digital cable for digital TV. For digital TV stations in
your area visit www.antennaweb.orq.
When a digital audio signal is associated with an input which is selected for
viewing, the digital audio associated with digital programming will be available
on this SPDIF Optical connector for connection to your home theatre system.
Connect the audio from the HDTV to an external device, such as a home
theater system, external amplifier or stereo. Speakers cannot be connected
directly to here.
Connect a secondary source for digital video such as a DVD multimedia player
or set-top box. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R
AUDIO here. VIZIO Certified HDMI and HDMI-DVI cables are available for
purchase from www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623).
Connect the source for component video devices such as a DVD Player or set
top box here. From left to right, use white for left audio and red for right audio
inputs, green for Y, blue for Pb (or Cb) and red for Pr (or Cr). s
Version 1/22/2009 11
www.VlZlO.com
VIZIOVO320EUserManual
Riqht--Side Panel. Connect,ion
SERVICEo-- ONLY
.................................................................................................
"1
2
AV2
Component 2
(YPb/CbPr/Cr with
Audio L/R)
Connect the secondary source for composite video devices, such as a
VCR or video game. Use the white and red connectors to connect the
external audio from the same source, then use the yellow connector to
connect the external video from the same source. The orange color
band on the side of the TV indicates this connection. Note: The red and
white audio connectors are shared between AV2 and COMPONENT2.
Connect the source for component video devices such as a DVD Player
or set top box here. From top to bottom, left to right, use green for Y,
blue for Pb (or Cb), red for Pr (or Cr), then connect white for left audio
and red for right audio inputs under the orange band. The purple color
band on the side of the TV indicates this connection. Note: The red and
white audio connectors are shared between AV2 and COMPONENT2.
.-4 Service Do not use. For service technician use only.
12
www.VlZlO.com
VIZIOVO320EUserManual
VlZIO Remote Control.
GUIDE- This button displays program information.
POWER ( C_ ) - Press this button to turn the TV on from the Standby
mode. Press it again to return to the Standby mode.
TV - Press this button to select TV.
AV - Press this button to select AV1 and AV2 (either Composite or S-
Video) input.
COMP - Press this button to select the Component (YPbPr) input. By
pressing this button repeatedly you will be switching from Component 1 to
Component 2 and vice versa.
HDMI - Press this button to select the HDMI input. By pressing it
repeatedly you will go through the two (HDMI 1 and HDMI 2) inputs in
sequence.
MENU - Use this button for the On-Screen Display (OSD) menu. When it
is used within a menu selection, pressing this key will help you to make the
selection of the feature to be adjusted after it has been highlighted.
• • _1 I_ -These labeled buttons are used to navigate the OSD menu.
When navigating the OSD menu, the arrows control the direction up and
down or left and right. They will also be used as value settings when the
slide bar is shown on the screen and option settings to turn a feature off or
on.
MUTE - This button turns the sound on and off.
LAST - This button recalls the previously viewed channel. If the On-
Screen Display (OSD) menu is being used, this button will allow you to get
back to previous menu screen or out to your program when you press it
repeatedly.
VOL A/T - This button turn the volume up or down.
CH A/T - This button change the channels up or down. !
NUMBER BUTTON PAD - Use these buttons to select a channel or enter
sa password.
INPUT - This button allows the user to cycle through the inputs.
Repeatedly pressing of this button will step you through the input sources
in the following sequence: TV, AV1, AV2/S-VIDEO, Component1,
Component2, RGB, HDMI1, and HDMI2. Once you have stepped through
the entire sequence, you will return to the beginning, r
- (DASH) - When selecting a digital channel directly use this
button for the separation of main and sub-channels. For
example, channel 28-2 would be selected by the button
sequence 2 8 ENTER 2.
@®®
(9@@
®@®
@@(D
VIZIO
Input
Version 1/22/2009 13
_w.VlZlO.com
VIZIOVO320EUserManual
Insertion off Batteries in t-he Remote, Control.
Insert two AA batteries into the remote control. Make sure that you match the
(+) and (-) symbols on the batteries with the (+) and (-) symbols inside the
battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage that may
pose a fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage that may
pose a fire risk or lead to personal injury.
Dispose of the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
I1
Remote Control. Ranqe
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30 ° to the left and right, 20 ° up and down.
UIZ.IO Remote Cont-r-ol. Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
14
www.VlZlO.com
VIZIOVO320EUserManual
Chapter- 2 Connectinq Equipment
Which Video Connection Shoul.d I Use?
The VIZIO HDTV has six different ways to connect your video equipment from a basic connection to the
most advanced for digital displays.
Best
(digital)
Best
(digital)
Good
(analog)
Best
(analog)
Better
(analog)
Good
(analog)
Note: For more
White
Black
Blue
Green and
Purple
Yellow,
and
Red
info refer to the Quick Start Guide
HDMI (High-Definition Multimedia Interface) - It is the
first and only industry-supported, uncompressed, all-
digital audio/video interface. HDMI provides an
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an audio
and/or video monitor, such as a digital television
(DTV), over a single cable.
DTV Coaxial RF. When used for MPEG2 encoded bit
streams from ATSC broadcast programming, this input
takes advantage of the High Definition content.
TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable.
RGB PC (VGA) - This video input has separate red,
green and blue color components. The signal carries
horizontal and vertical sync information on the green
signal. This is most commonly used for PC input.
Component1/2 - The video signal is separated into
three signals, one containing the black-and-white
information and the other two containing the color
information. This enhancement over S-Video takes
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
S-Video (AV1) - The video signal is separated into two
signals, one containing the black-and-white information
and the other containing the color information.
Separating the color in this way avoids 'cross color'
effects where closely spaced black and white lines are
erroneously displayed in color. It also enables text to
be displayed more sharply.
Composite (AVI/2) - The complete video signal is
carried through this single pin connector. This is the
most commonly used video connection.
Version 1/22/2009 15
www.VlZlO.com
VIZIOVO320EUserManual
Connecting Your" Cabl.e or" Sat-el.l.it-e Box
You have four options for connecting your cable or satellite box to your HDTV: HDMI, Component,
Composite, or Coax (RF). Based on your home theater configuration, you can decide which option is the
right one for you. Refer to your set-top box user manual for more information about the video output
requirements or consult your cable or satellite operator.
Using HDMI (Best)
HDMI
HDMI 1
_T TOPBOX_
Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of
the HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10
meters. See www.vizio.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
,
2.
,
4.
Turn off the power to the HDTV and HDTV Set-Top Box.
Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to
the HDMI 1 input (white color area) at the rear of the HDTV.
Turn on the power to the HDTV and HDTV Set-Top Box.
Select HDMI 1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note:
The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection (HDCP).
HDCP encrypts the transmission between the video source and the digital display for added
security and protection.
If you are already using the HDMI1 input for another component, or you do not want to use the
HDMI1 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI 2 connection.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
16
www.VlZlO.com
VIZIOVO320EUserManual
HDMI Connections for Cable or Satellite Boxes with DVI
\
,
2.
,
,
5.
HDMI 2
®
L R
AUDIO
o° I
SET TOP BOX
Turn off the power to the HDTV and HDTV Set-Top Box.
Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end
to the HDMI 2 input (white color area) at the rear of the HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your HDTV Set-Top Box and connect the other
end to the audio connectors associated with the HDMI input (white area) at the rear of the
HDTV.
Turn on the power to the HDTV and HDTV Set-Top Box.
Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note:
The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection (HDCP).
HDCP encrypts the transmission between the video source and the digital display for added
security and protection.
If you are already using the HDMI 2 input for another component, or you do not want to use the
HDMI 2 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI1 connection.
The LCD TV will recognize the DVI connection and obtain audio information from the audio
connectors near HDMI 2 input.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Using Component Video (Better)
,
2.
3.
4.
5.
Turn off your HDTV and set-top box.
Connect the component cables (green, blue, and red) from your set-top box to the
COMPONENT jacks on the back of your HDTV.
Connect the audio cables (white and red) from your set-top box to the adjacent
COMPONENT L and R Audio jacks on the back of your HDTV.
Turn on your HDTV and set-top box.
Press COMPONENT on the remote control to view the content. You can also press INPUT
on the remote control.
Version 1/22/2009 17
www.VlZlO.com
VIZIOVO320EUserManual
Using S-Video (Better)
S.VIDEO/AV1
1. Turn off your HDTV and set-top box.
2. Connect the S-VIDEO cable from your set-top box to the S-VIDEO jack on the back of your HDTV.
3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R
AUDIO jacks on the back of your HDTV.
4. Turn on your HDTV and set-top box.
5. Press AV on the remote control to view the content. You can also press INPUT on the remote
control.
Using Composite Video (Good)
S'VIDEO/AV1
SET TOP BOX
1. Turn off your HDTV and set-top box.
2. Connect the video cable (yellow) from your set-top box to the AV jack (yellow) on the back of your
HDTV.
3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R
AUDIO jacks on the back of your HDTV.
4. Turn on your HDTV and set-top box.
5. Press AV on the remote to view the content. You can also press INPUT on the remote control.
Using Coaxial (Antenna) (Good)
,
2.
,
4.
L ,ooI
TOP BOX
Turn off the power to the HDTV.
Connect the coaxial (RF) connector from your antenna or digital cable to the DTV/TV
CABLE/ANTENNA connector at the rear of the HDTV.
Turn on the power to the HDTV.
Select DTV using the INPUT button on the remote or side of the HDTV, or directly by
pressing the TV button on the Remote Control.
18
www.VlZlO.com
VIZIOVO320EUserManual
Connecting Coaxial. [RF:I
Using Your Antenna or Digital Cable for Standard TV or DTV
oo Oo
L CABLE BOX
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV
CABLE/ANTENNA connector at the rear of the HDTV
3. Turn on the power to the HDTV.
4. Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing
the TV button on the Remote Control.
Using the Antenna or Cable through Your VCR
,
2.
,
4.
L
oo Oo
Turn off the power to the HDTV and VCR.
Connect the "Output to TV", "RF Out" or "Antenna Out" connector on the rear of your VCR to
the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV.
Turn on the power to the HDTV and VCR.
Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing
the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the "Antenna In" connector on the rear of
your VCR.
Version 1/22/2009 19
www.VlZlO.com
VIZIOVO320EUserManual
Connect'incj ',/our DUD PI.aver-
You have several options for connecting your DVD player to your HDTV - HDMI, Component, S-Video
and Composite (AV) inputs. Based on your home theater configuration, you can decide which option is
the right one for you.
Using HDMI (Best)
For optimal results, DVD players that have a digital interface such as HDMI should be connected to the
HDMI input on your HDTV.
HDMI
HDMI 1
1. Turn off your HDTV and DVD player.
2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI
1 input (white color area) at the rear of the HDTV.
3. Turn on the power to the HDTV and your DVD player.
4. Select HDMI 1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note: If HDMI 1 is being used, connect to the HDMI 2 port instead.
HDMI Connections for DVD Players with DVI:
\
HDMI 2
L R
AUDIO
,
2.
3.
4.
5.
Turn off your HDTV and DVD player.
Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the
HDMI 2 Input at the rear of the HDTV.
Connect the audio cables (white and red) from the DVI audio output jacks on the DVD player
to the adjacent HDMI 2 L and R AUDIO jacks on the back of your HDTV.
Turn on the power to the HDTV and your DVD player.
Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note: If HDMI 2 is being used, connect to the HDMI 1 port instead.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10
meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
2O
www.VlZIO.com
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
