Philips BGY587B User manual

Brand: Philips

Model: BGY587B

Category: TV signal amplifiers

Type: User manual

DATA SHEET

Product speciﬁcation

Supersedes data of 1997 Apr 10

2001 Oct 22

DISCRETE SEMICONDUCTORS

BGY587B

550 MHz, 27 dB gain push-pull

amplifier

ook, halfpage

M3D252

2001 Oct 22 2

Philips Semiconductors Product speciﬁcation

550 MHz, 27 dB gain push-pull ampliﬁer BGY587B

FEATURES

• Excellent linearity

• Extremely low noise

• Silicon nitride passivation

• Rugged construction

• TiPtAu metallized crystals ensure

optimal reliability.

DESCRIPTION

Hybrid amplifier module for CATV

systems operating over a frequency

range of 40 to 550 MHz at a voltage

supply of +24 V (DC).

PINNING - SOT115J PIN CONFIGURATION

PIN DESCRIPTION

1 input

2 common

3 common

5+V

7 common

8 common

9 output

Fig.1 Simplified outline.

page

351

Side view

MSA319

QUICK REFERENCE DATA

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134).

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

power gain f = 50 MHz 26.2 27.8 dB

f = 550 MHz 27.5 − dB

tot

total current consumption (DC) V

= +24 V − 340 mA

SYMBOL PARAMETER MIN. MAX. UNIT

RF input voltage − 55 dBmV

stg

storage temperature −40 +100 °C

operating mounting base temperature −20 +100 °C

DC supply voltage − +28 V

2001 Oct 22 3

Philips Semiconductors Product speciﬁcation

550 MHz, 27 dB gain push-pull ampliﬁer BGY587B

CHARACTERISTICS

Table 1 Bandwidth 40 to 550 MHz; T

case

=30°C; Z

=75Ω

Notes

1. f

= 55.25 MHz; V

= 44 dBmV;

= 493.25 MHz; V

= 44 dBmV;

measured at f

= 548.5 MHz.

2. Measured according to DIN45004B;

= 540.25 MHz; V

= 66.5 dBmV;

= 547.25 MHz; V

−6 dB;

= 549.25 MHz; V

−6 dB;

measured at f

−f

= 538.25 MHz.

3. The module normally operates at V

= +24 V, but is able to withstand supply transients up to +30 V.

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

power gain f = 50 MHz 26.2 27.8 dB

f = 550 MHz 27.5 dB

SL slope cable equivalent f = 40 to 550 MHz 0.5 2.5 dB

FL ﬂatness of frequency response f = 40 to 550 MHz −±0.4 dB

input return losses f = 40 to 80 MHz 20 − dB

f = 80 to 160 MHz 19 − dB

f = 160 to 550 MHz 18 − dB

output return losses f = 40 to 80 MHz 20 − dB

f = 80 to 160 MHz 19 − dB

f = 160 to 550 MHz 18 − dB

CTB composite triple beat 77 channels ﬂat; V

= 44 dBmV;

measured at 547.25 MHz

−−57 dB

mod

cross modulation 77 channels ﬂat; V

= 44 dBmV;

measured at 55.25 MHz

−−60 dB

CSO composite second order

distortion

77 channels ﬂat; V

= 44 dBmV;

measured at 548.5 MHz

−−57 dB

second order distortion note 1 −−68 dB

output voltage d

= −60 dB; note 2 61 − dBmV

F noise ﬁgure f = 550 MHz − 6.5 dB

tot

total current consumption DC value; V

= +24 V; note 3 − 340 mA

2001 Oct 22 4

Philips Semiconductors Product speciﬁcation

550 MHz, 27 dB gain push-pull ampliﬁer BGY587B

PACKAGE OUTLINE

UNIT

max.

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION

ISSUE DATE

IEC JEDEC EIAJ

mm 20.8 9.1

0.51

0.38

0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8

4.15

3.85

2.4 38.1 25.4 10.2 4.2 44.75 8 0.25 0.1 3.8

6-32

UNC

DIMENSIONS (mm are the original dimensions)

SOT115J

0 5 10 mm

scale

max.

min.

max.

Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;

2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J

Z p

78923

max.

y M

99-02-06

y M

2001 Oct 22 5

Philips Semiconductors Product speciﬁcation

550 MHz, 27 dB gain push-pull ampliﬁer BGY587B

DATA SHEET STATUS

Notes

1. Please consult the most recently issued data sheet before initiating or completing a design.

2. The product status of the device(s) described in this data sheet may have changed since this data sheet was

published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.

DATA SHEET STATUS

(1)

PRODUCT

STATUS

(2)

DEFINITIONS

Objective data Development This data sheet contains data from the objective speciﬁcation for product

development. Philips Semiconductors reserves the right to change the

speciﬁcation in any manner without notice.

Preliminary data Qualiﬁcation This data sheet contains data from the preliminary speciﬁcation.

Supplementary data will be published at a later date. Philips

Semiconductors reserves the right to change the speciﬁcation without

notice, in order to improve the design and supply the best possible

product.

Product data Production This data sheet contains data from the product speciﬁcation. Philips

Semiconductors reserves the right to make changes at any time in order

to improve the design, manufacturing and supply. Changes will be

communicated according to the Customer Product/Process Change

Notiﬁcation (CPCN) procedure SNW-SQ-650A.

DEFINITIONS

Short-form specification  The data in a short-form

specification is extracted from a full data sheet with the

same type number and title. For detailed information see

the relevant data sheet or data handbook.

Limiting values definition  Limiting values given are in

accordance with the Absolute Maximum Rating System

(IEC 60134). Stress above one or more of the limiting

values may cause permanent damage to the device.

These are stress ratings only and operation of the device

attheseoratanyotherconditionsabovethosegiveninthe

Characteristics sections of the specification is not implied.

Exposure to limiting values for extended periods may

affect device reliability.

Application information  Applications that are

described herein for any of these products are for

illustrative purposes only. Philips Semiconductors make

norepresentationorwarrantythat suchapplicationswillbe

suitable for the specified use without further testing or

modification.

DISCLAIMERS

Life support applications  These products are not

designed for use in life support appliances, devices, or

systems where malfunction of these products can

reasonably beexpectedtoresult in personal injury. Philips

Semiconductorscustomersusingorsellingtheseproducts

for use in such applications do so at their own risk and

agree to fully indemnify Philips Semiconductors for any

damages resulting from such application.

Right to make changes  Philips Semiconductors

reserves the right to make changes, without notice, in the

products, including circuits, standard cells, and/or

software, described or contained herein in order to

improve design and/or performance. Philips

Semiconductors assumes no responsibility or liability for

theuse ofanyoftheseproducts,conveysno licenceortitle

under any patent, copyright, or mask work right to these

products,andmakesnorepresentations orwarranties that

these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified.

2001 Oct 22 6

Philips Semiconductors Product speciﬁcation

550 MHz, 27 dB gain push-pull ampliﬁer BGY587B

NOTES

2001 Oct 22 7

Philips Semiconductors Product speciﬁcation

550 MHz, 27 dB gain push-pull ampliﬁer BGY587B

NOTES

SCA73

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.

The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed

without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license

under patent- or other industrial or intellectual property rights.

Philips Semiconductors – a worldwide company

Contact information

For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825

For sales ofﬁces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.

Printed in The Netherlands 613518/03/pp8 Date of release: 2001 Oct 22 Document order number: 9397 750 08803