Pyle PMKSH28 Owner's manual

SUSPENSION BOOM MIC STAND

FLOOR-STANDING

QUICK GUIDE

PMKSH28

11.81 in diameter

19.68 in

39.37 in

Accessories:

Mic Holders

How to use:

1. Tighten the two poles into one pole (E), then screw the pole end to

the iron base (F).

2. Screw the adaptor( D) to the iron base( E).

3. Unscrew the knob of the adaptor( D), then put the recording mic

stand(C) bottom inside the hole of the adaptor(D).

4. Screw the shock mount (B) on the arm frame connection of the

recording mic stand(C)

5. Adjust the recording mic stand(C) to desired height.

6. Screw the pop lter(A) on the right place of the recording mic

stand(C)

7. Slide your microphone into the shock mount(B).

Materials:

A. Pop lter: plastic and steel

B. Shock mount: steel

C. Recording mic stand: steel

D. Adaptor: Aluminum w/ plastic knob

E. Two poles: steel

F. Iron base: steel