609/1415
Assembly Instructions – Please keep for future reference
Important – Please read these instructions fully before starting assembly
Dimensions
Width - 40cm
Depth - 40cm
Height - 45cm
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 -
08/12/09
Glass Lamp Table
Safety and Care Advice
Glass safety
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
Important – Please read these instructions fully before starting assembly
1
• Dispose of all packaging
carefully and responsibly.
•
Place the product on flat and
steady surface during use.
• Keep these instructions for
further use.
• Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
• This product complies with
BS7449: 1991.
• Imported by:
Home Retail Group.
489-499 Avebury Boulevard.
Saxon Gate West.
Central Milton Keynes.
MK9 2NW
• Product Cat No.: 609/1415(D)
• P/O No:
• The glass included with this product is tempered glass of a
nominal thickness of 6 mm. It complies to BS6206 class C. If a
glass component is chipped or broken replace with glass of the
type described on this label. Consult the manufacturer, retailer or
agent with regard to obtaining a manufacturing specification and
shape for replacement glass quoting the model number and batch
number or date of manufacture.
• Maximum safety load of glass is 20KGS.
Warnings
1) Do not place very hot or very cold items against or in close proximity to glass surfaces unless an
adequately thick insulating material is used to prevent such items from coming into contact with the
glass.
2) Do not strike the glass with hard or pointed items.
3) When cleaning glass panels or mirrors use damp cloth or leather with washing up liquid or soft soap
if necessary, do not use washing powders or any other substance containing abrasives since these
substances scratch glass.
4) Do not sit or stand upon horizontal glass surfaces.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Do not stand or put excessive
weight on the product, this
could cause damage.
• From time to time check that
there are no loose screws on
this unit.
Please check you have all the parts listed below
Components - Parts
2
Glass top (Ø40cm)
Pedestal (41.8 x 5cm)
Glass base (Ø35cm)
1 2
3
Components - Fittings
A
Nut x 1
3
Please check you have all the fittings listed below
Threaded rod x 1
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
B C
D
Self adhesive pad x 4
Spanner x 1
0
Ruler – Use this ruler to help correctly identify the screws
5
10 2015 4035
30
25 80
75
7060 65
45
50
55
160155150140 145120 125
130 135
85 90 10095 115110105 165 170
Note:
The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Step 1
Assembly Instructions
Attaching threaded rod
4
Step 2
Locating pedestal
Slide pedestal over
the threaded rod.
Ensure the end with the
plastic cap is facing
down.
1
A
B
2
Screw nut onto
one end of threaded
rod .
Place glass top
upside down onto a
clean flat surface.
Screw threaded rod
into the metal disc
on glass top .
Fully tighten nut
down onto the metal
disc.
A
B
B
1
A
1
40CM Diameter
Upside down
Plastic cap this end
2
1
A
B
Assembly Instructions
Step 3
Step 4
Attaching glass base
Carefully screw glass
base onto the end
of threaded rod.
Do not overtighten.
Assembly is complete.
5
3
C
C
3
2
2
a:
b:
Shown from
below glass base!
35CM Diameter
Attaching pads
a: Peel off the protective
film from self adhesive
pads .
Stick self adhesive pads
to the glass base.
b: Turn the table upright.
C
3
C
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
/
