Save important data on the memory card on other media such as a computer, before formatting the memory
card.
Do not insert anything other than the compliant size of memory card into the memory card slot. Otherwise,
a malfunction may result.
When inserting or ejecting the memory card, be careful to prevent the memory card from popping out and
dropping.
Inserting a memory card
The memory cards that can be used with the camera
The memory cards that can be used with the camera are listed below.
Note
When you shoot long time with XAVC S or MP4 to the SDHC memory card, the file will be divided into 4 GB
files. By using the Action Cam Movie Creator, you can unify the data and treat as 1 file.
To playback the divided files with the camera, it will be played back continuously. (FDR-X3000/HDR-AS300)
Operation with all memory cards is not assured. For details about memory cards other than cards
manufactured by Sony, contact the individual makers.
Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong direction, the
memory card, memory card slot, or image data maybe damaged.
Format the memory card with the camera before use.
Confirm that the connector cover and the battery pack/memory card cover are securely closed and any
foreign matter is not stuck in the cover before use. Otherwise, it may result in water immersion.
Memory card MP4 XAVC S
Memory stick micro (M2)
(Mark2 only)
—
microSD memory card
*1
—
microSDHC memory card
*1 *2
microSDXC memory card
*1 *2
SD speed class4:
or faster, or UHS speed class1: or faster.
Memory card that satisfies all the conditions below.
4 GB or more capacity.
SD speed class10:
or faster, or UHS speed class1 : or faster.
If you want to record more than 100 Mbps, UHS speed class 3:
is necessary. (FDR-X3000)
