HoMedics HDC-MCS-300H Instruction book

Step 1

Take the header card

out from the box and

protection polybag.

Step 2

Insert the tab (A) into

the pocket located on

the back of the chair

as shown.

Tab (A)

Display Chair Header & Cushion Set Up Directions

IB-HDCMCS300H Display Model # HDC-MCS-300H for use with MCS-300H

Note: Please apply the display header to an existing HoMedics display chair in your

store. If needed, your buyer may have also ordered new chairs (Model # DS-CHAIR).

Step 3

Once the header is on the display

chair, take model # MCS-300H

from stock and place the HoMedics

massage cushion on the chair.

Use Model # MCS-300H, Shiatsu

Massage Cushion – Traveling

Shiatsu with Vibration – with Heat,

for this header.

Final Display

The finished display will look

like this.

NOTE: It is imperative this

display remains powered at

all times. Your buyer has

ordered this display

specifically to help drive

sales.