Shark UV380 Owner's manual

Type
Owner's manual

This manual is also suitable for

Shark UV380: Experience ultra-light, versatile cleaning with the power of DUOCLEAN®. Tackle all surfaces, from floors to ceilings, with a motorized floor nozzle and duster crevice tool. Easily switch between floor settings for optimal cleaning of bare floors, area rugs, and carpets. Enjoy convenient storage with the onboard hook and cord hooks. Maintenance is a breeze with easy-to-empty dust cups and washable filters.

Shark UV380: Experience ultra-light, versatile cleaning with the power of DUOCLEAN®. Tackle all surfaces, from floors to ceilings, with a motorized floor nozzle and duster crevice tool. Easily switch between floor settings for optimal cleaning of bare floors, area rugs, and carpets. Enjoy convenient storage with the onboard hook and cord hooks. Maintenance is a breeze with easy-to-empty dust cups and washable filters.

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Handheld Vacuum
B
 Motorized Floor Nozzle
C
 Wand
D
 Duster Crevice Tool
WHAT’S INSIDE STORAGE
MAINTENANCE
UV380_QSG_MP_Mv1
A
B
C
QUICK START GUIDE
ULTRA-LIGHT
WITH DUOCLEAN®
2
(Click)
1
(Click)
Option 1: Onboard Hook
For compact, convenient storage, hang the handheld
vacuum on the hook on the bottom of the wand, and wrap
the power cord around the cord hooks. The unit stores
easily in a closet or along a wall.
Handheld
Vacuum Catch
Handheld Vacuum
Storage Hook
Empty the dust cup every
time debris reaches the
MAX fill line.
TIP: Wash filters every
month to keep
the suction strong.
D
Brushroll Maintenance
1. Press down on the two buttons on the floor nozzle to pop
up the brushroll garage lid.
2.
Lift the brushroll out by the tab on the left side. Use a pair
of scissors to carefully remove any string, hair or debris that
may be wrapped around the brushroll.
Soft Roller Maintenance
1. Slide the Soft Roller access button up to remove the Soft
Roller.
VERSATILE FLOOR-TO-CEILING CLEANING
2
Choose Setting
Slide the power switch on the handle to the
appropriate floor setting and start cleaning.
1
Plug In Vacuum
Then place your foot
gently on the floor nozzle
and tilt the handle back.
ll
l
0
ll
l
0
FLOOR CLEANING ABOVE-FLOOR CLEANING
ll
l
0
ll
l
0
ll
l
0
ll
l
0
NOTE: For deep cleaning per ASTM F
608 (embedded dirt in carpet) please
use Setting II, high pile carpet mode.
Setting II
Deep-cleans carpets by removing
embedded dirt.
Both brushrolls spin faster to pick
up debris below the surface of
your carpets.
Setting I
Gentle on bare floors and area rugs.
The brushroll and the Soft Roller both
spin together slowly to clean bare
floors and arearugs.
Press the Wand Release
button on the top of the
wand to disconnect it from
the handheld vacuum.
1
Stand the vacuum upright.
Step on the foot pedal
and pull the wand up to
disconnect it from the
motorized floor nozzle.
2
Attach desired cleaning accessory.
NOTE: Use Setting I
for all above-floor
accessories.
OR
Floor Nozzle
Release
Wand Release
Wand
Release
©2018 DUOCLEAN, ROCKET, and SHARK are registered trademarks of SharkNinja Operating LLC.
© 2018 SharkNinja Operating LLC
For questions or to register your product visit us online at sharkclean.com
  • Page 1 1
  • Page 2 2

Shark UV380 Owner's manual

Type
Owner's manual
This manual is also suitable for

Shark UV380: Experience ultra-light, versatile cleaning with the power of DUOCLEAN®. Tackle all surfaces, from floors to ceilings, with a motorized floor nozzle and duster crevice tool. Easily switch between floor settings for optimal cleaning of bare floors, area rugs, and carpets. Enjoy convenient storage with the onboard hook and cord hooks. Maintenance is a breeze with easy-to-empty dust cups and washable filters.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI