Ridetech 11359400, 11379400 Operating instructions

Hello! I've reviewed the Installation Instructions for the ridetech Tie Rod Adjuster 1971-1987 C10. This document details the installation process for replacing the OEM steel sleeve and highlights the adjuster's key features such as the left-hand threaded side marked by a groove. I'm ready to answer any questions you have about the described product and installation process.
What is the purpose of this Tie Rod Adjuster?

How can I identify the left-hand threaded side?

What should I do when installing the Tie Rod Adjuster?

What is minimum required thread engagement?

How do I ensure proper thread engagement?

1812-482-2932

Installation

Instructions

Recommended Tools

www.ridetech.com

Part # 11359400 - 1971-1987 C10 Tie Rod Adjuster

Major Components .....In the box

QTY Part Number Description

2 90000138 Tie Rod Adjuster

2 99800000 11/16”-18 Right Hand Jam Nut

2 99800001 11/16”-18 Left Hand Jam Nut

NOTES:

This Tie Rod Adjuster is designed to take place of the OEM steel sleeve.

One end of the adjuster has a groove cut in it, this is the LEFT HAND threaded side.

When installing the Tie Rod Adjuster, use antisieze compound on the threads.

FOR YOUR SAFETY, THE TIE RODS NEED A MINIMUM 1 1/32” OF THREAD ENGAGEMENT INTO THE

TIE ROD ADJUSTER. USE THE SIGHT HOLE IN THE SIDE OF THE TIE ROD ADJUSTER TO ENSURE

PROPER THREAD ENGAGEMENT.

REV2 5/15/23