SIMPLIFIED MFG 297REX21 User manual

REX2.1

4K@30Hz. Extender Set (HDCP1.4)

1080p Extender (70m/231ft.)

V1.1

Thank you for purchasing the REX2.1 Extender

The REX2.1 is a HDMI 1.4b Extender set designed to provide

years of reliable service. Please keep this manual as a reference.

Surge protection device recommended

The external supply is very robust, but a surge device is always

good insurance in electrically active areas where the power grid

is unreliable. If connected to satellite or cable boxes, a

HDSURGE is recommended to prevent surges through the HDMI

cable.

Table of Contents

1.

Introduction. ............................................................................... 1

2.

Features. .....................................................................................

1

3.

Package Contents. ................................................................ 2

4.

Specifications. ...................................................................... 2

5.

Operation Controls and Functions. ....................................... 4

5.1

Transmitter Panel……………………………………………………4

5.2

Receiver Panel……………………………………………………5

5.3

IR Pin Definition……………………………………………………..6

6.

Application Example............................................................. 7

7.

Warranty……………………………………………………………….8

8.

Contact……………………………………………………………..9

1/9

1.

Introduction

The REX2.1 Extender can extend a 1080p AV signal up to 70m

(232ft) and a 4K 30hz. signal up to 40m (131ft). The REX2.1 is

compact and robust making it a robust 1080p extender with the

ability to also support 4K@30Hz. Applications would be 4K 30Hz

NVR’s or media servers that have HDCP 1.4 or no HDCP, cable or

satellite boxes in 1080p

2.

Features

• Compact Design

• IR Pass-through from display back to TX

• Supports up to 4K 30Hz.

CAT6: 230ft/70m for 1080p, 131ft/40m for 4K30

CAT5E: 197ft/60m for 1080p, 115ft/35m for 4K30

• Loop out allows cascading or intercepting of signal

• EDID can be attained from RX or Loop out

2/9

3.

Package Contents

1 × HDMI Transmitter

1 × HDMI Receiver

1 × IR Blaster Cable

1 × IR Receiver Cable

1 × 12V/1A DC Power Adapter

1 × User Manual

4.

Specifications

Technical

HDMI Compliance

HDMI 1.4

HDCP Compliance

HDCP 1.4

Video Bandwidth

10.2Gbps

Video Resolution

Up to 4K@30Hz

Audio Support

Up to 7.1CH HD audio

Input TMDS Signal

3.3 volts

Input DDC Signal

5.0 volts/P-P

ESD Protection

Human Body model:

+/- 8 kV (air-gap discharge)

+/- 4 kV (contact discharge)

3/9

Connection

Transmitter

Input: 1 x HDMI Type A [19-pin female]

Outputs:1 x HDMI Type A [19-pin female]

1 x IR OUT [3.5mm Stereo Mini jack]

1 x CAT OUT [RJ45, 8-pin female]

Receiver

Inputs: 1x IR IN [3.5mm Stereo Mini jack]

1x CAT IN [RJ45, 8-pin female]

Output: 1x HDMI Type A [19-pin female]

Mechanical

Housing

Metal Enclosure

Color

Black

Dimensions

79.5mm (3.125”) [W] x 69mm (2.75”) [D] x

16.5mm (0.65”) [H]

Weight

Transmitter: 132g (4.65 oz.), Receiver: 130g

(4.6 oz.)

Power Supply

12V/1A DC

Power Consumption

Transmitter: 1.86W, Receiver: 0.87W

Operation

Temperature

32 - 104°F / 0 - 40°C

Storage temperature

-4 - 140°F / -20 - 60°C

Relative Humidity

20 - 90% RH (no condensation)

4/9

5.

Operation Controls and Functions

5.1

Transmitter Panel

❶ ❷ ❸ ❹ ❺❻ ❼ ❽

No.

Name

Function Description

1 HDMI IN HDMI signal input port. Connect to HDMI

source device

2

EDID

Switch

The switch is used for selecting EDID: Switch to

the right

position, the extender will copy HDMI

loop out display EDID information to signal

source

. Switch to the left position, the extender

will copy RX display EDID to signal source

3 HDMI OUT

HDMI signal loop out port. Connect to another

extender or display

4 IR OUT

Connect to IR blaster cable, the IR signal is

from the IR IN port of the RX device

5 Power LED

When the transmitter is powered on, the LED

will be Illuminated

6 CAT

CAT output port. Connect to the CAT input

port of the RX device with CAT5E/6 cable.

5/9

7 Link LED

When the transmitter is connected to HDMI

source, the amber LED will be illuminated

8

DC 12V

DC 12V power supply port

5.2

Receiver Panel

❶ ❷ ❸❹❺

No.

Name

Function Description

1 HDMI OUT

HDMI signal output port. Connect to HDMI

display device such as HDTV

2 IR IN

Connect to IR receiver cable, the IR signal

will emit to the IR OUT port of the

transmitter

3 Power LED

When the receiver is powered on, the LED

will be on

4 CAT

CAT input port. Connect to the CAT output

port of the transmitter with CAT5E/6 cable

5 Link LED

When the receiver is connected to HDMI

source, the amber LED will be on

6/9

5.3

IR Pin Definition

IR Receiver and Blaster pin’s definition is as below:

IR RECEIVER IR BLASTER

IR Blaster Signal

Power

NC

IR Signal

Power

Grounding

IR Blaster

IR Receiver

7/9

6.

Application Example

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other

countries.

8/9

7.

Warranty

Should you feel that this product does not function adequately

due to defects in materials or workmanship, we (referred to as

“the warrantor”) will, for the length of the period indicated below

(starting from the original date of the purchase) either a) repair

the product with new or refurbished parts. Or b) Replace the

product with new or refurbished product. All Simplified MFG

products are covered by a 3-year warranty. During this period

there will be no charge for unit repair, replacement of unit

components or replacement of the product if deemed necessary.

The decision to repair or replace is made by the warrantor. The

purchaser must mail in the product during the warranty period.

This limited warranty only covers the product purchased as new

and is extended to the original purchaser only. It is non-

transferrable to subsequent owners, even during the warranty

period. A purchase receipt or other proof of purchase date is

required for the limited warranty service.

9/9

8.

Contact

Sales and tech support;

P. 833-HDMI-411 (833-436-4411)

E. [email protected]

Simplified MFG • 550 W Baseline Rd Ste 102-121 • Mesa, AZ 85210

Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.com • 833-HDMI-411 (436-4411)

HDMI

Source

REX2 Quick Start Guide

CAT6/6A/7/8

IR

HDMI

• The REX2 is a 70m 1080p Extender that

supports 4K @ 50m (HDCP 1.4 only)

• The REX2 has to be powered on both

ends. Make sure power connection to

the unit is made before plugging in the

power adapter to AC.

• IR Commands are returned from the

display to the Transmitting unit for

source control

REX2.1

4K HDMI 2.0a/b over

Category Cable Extender Kit

833-HDMI–411 (436-4411) • www.simplifiedmfg.com • 550 W Base-

Specifications:

The REX2.1 is a HDMI 2.0a 4K Ex-

tender set that supports HDR

@24/25/30Hz. Applications are; 4K

cameras/NVR/DVR where HDCP2.2 is

not used and as a far more robust

version of the REX1 for 1080p appli-

cations (longer distance more

throughput) Small size makes it easy

to place behind displays. 1 Way IR

kit is included and sends IR from the

display end to the transmission end.

Upgrade over REX2 is that the REX2.1

powers at the TX only.

Features:

• HDMI 2.0a

• Supports HDR

• Supports all HD Audio Formats

• Small size for easy placement

• HDMI loop through

• LED Indicators for Input, Power, &

Link

• 50m [4K @ 24/25/30Hz.]

• 3-Year Warranty

Technical

HDMI

Compliance HDMI 2.0a [10.2Gbps, supports HDR]

HDCP

Compliance HDCP 1.4

Video Bandwidth 10.2 Gbps

Video

Resolutions

up to 4K2K@50/60Hz

(YUV4:4:4),4K2K@30Hz,1080P@120Hz, and 1080P

3D@60Hz

Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2

Color Depth 10-bit, 12-bit

HDMI Audio

Formats

(Pass-through)

LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby

Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby

Atmos, DTS:X

ESD Protection Human body model — ±8kV (air-gap discharge) & ±4kV

(contact discharge)

Connections

Inputs

TX: 1x HDMI Type A [19-pin female]

1x Locking Power

RX: 1x RJ45 Input

1x 3.5mm mini jack for IR

Outputs

TX: 1x RJ45 Output

1x 3.5mm mini jack for IR

1x HDMI Type A [19-pin female]

RX: 1x HDMI Type A [19-pin female]

Mechanical

Housing Metal Enclosure

Color Black

Dimensions [RX] 60mm [W] x 60mm [D] x 17mm [H], 2.375” x

2.375”x .67”

Weight [RX] 90g 3.17 0z.

Power Supply

Input: AC100 - 240V 50/60Hz

Output: DC 12/1A (US/EU standards, CE/FCC/UL cer-

tified)

Power

Consumption 2.8W (Max)

Operation

Temperature 32 - 104°F / 0 - 40°C

Storage

Temperature -4 - 140°F / -20 - 60°C

Relative

Humidity 20 - 90% RH (no condensation)

At the TX end:

Is everything connected (Cat, HDMI, Power etc)?

Is the HDMI cable in the HDMI input of the TX? We often

use a loop out, make sure the input is not in this port.

What are the lights where the Cat cable plugs into doing?

Is the Green Lit Solid?

Yes, good! Flashing or off

the category cable is poor.

This can be the termination

(check the manual for wiring

termination), poor wire, or

interference from being run

poorly

Is the Amber Lit Solid?

Yes good! Flashing slowly

means no HDCP, off means

no signal at HDMI port(s)

How to use and trouble shoot

Simplified MFG Extenders

Typical Extender use

At the RX end:

Is the Green Lit Solid?

Yes, good! Flashing or off

the category cable is poor.

This can be the termination

(check the manual for wiring

termination), poor wire, or

interference from being run

poorly

Is the Amber Lit Solid?

Yes good! Flashing slowly

means no HDCP, off means

no signal at HDMI port(s)

Other Techniques:

Make the circuit simpler. Move the source near the

display or the display near the source and see if it

works with a short HDMI cable. You can use this to

verify the HDMI cables work as well. Add components

until the system fails.

Use a known working run of category cable across the

floor and see if behavior changes.

It is often the case that the display’s setting can cause

odd/poor behavior. Consult the display’s tech

resources. Also, it is possible we have seen the issue

and may have a tech paper on this.

Not a bad idea to keep the following on your service

vehicle:

• Test source like an AppleTV or signal generator

• Known working HDMI cables

• Known working terminated Category cable

• SP12S splitter for clocking issues, etc.

Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.com • 833-HDMI-411 (436-4411)

SIMPLIFIED MFG 297REX21 User manual

Related papers

Other documents