2. Spectrum Industries
  3. 37134 Cart Handle

Spectrum Industries 37134 Cart Handle Owner's manual

  • Hello! I've reviewed the instructions for installing the Handle 37134 for the 3D2GO Printer Cart. I understand the process involves aligning the handle and securing it with screws, as detailed in the document. I'm ready to answer any questions you might have about the installation process or the components of the handle.
  • What is the part number of the handle?
    What size are the screws used to secure the handle?
    How many screws are needed for installation?
0190573 Page 1 of 1
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
© 2017 Spectrum Industries Inc., All rights reserved.
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
Tools
Required
Installation
Handle for 3D2GO™ Printer Cart
37134
Phillips
Screwdriver
(4) 026064
1/4-20 x 5/8” PHMS
(1) 0119981
Handle
1. Align the (4) handle and cart mounting holes. Figure 1.
2. Secure the handle with (4) 1/4-20 x 5/8” PHM screws and tighten
securely.
Figure 1
Handle
(4) 1/4-20 x 5/8” PHMS
/