MagnaFlow 19385 Installation guide

Brand
MagnaFlow
Model
19385
Type
Installation guide

This manual is also suitable for

MagnaFlow 19385 is a performance exhaust system designed to improve the sound, performance, and appearance of your vehicle. This system is made from high-quality materials and features a mandrel-bent design for maximum flow and performance. The MagnaFlow 19385 is easy to install and comes with all the necessary hardware.

Here are some of the benefits of installing a MagnaFlow 19385 performance exhaust system:

  • Improved sound: The MagnaFlow 19385 will give your vehicle a deep, throaty sound that is sure to turn heads.
  • Increased performance: The MagnaFlow 19385 will help your vehicle breathe better and produce more power.

MagnaFlow 19385 is a performance exhaust system designed to improve the sound, performance, and appearance of your vehicle. This system is made from high-quality materials and features a mandrel-bent design for maximum flow and performance. The MagnaFlow 19385 is easy to install and comes with all the necessary hardware.

Here are some of the benefits of installing a MagnaFlow 19385 performance exhaust system:

  • Improved sound: The MagnaFlow 19385 will give your vehicle a deep, throaty sound that is sure to turn heads.
  • Increased performance: The MagnaFlow 19385 will help your vehicle breathe better and produce more power.
19388 2/01/18 REV 000
1
BILL OF MATERIALS:
1. MUFFLER ASSEMBLY
HARDWARE KIT:
SHOP SUPPLIES:
MINIMUM REQUIRED TOOLS:
WEAR SAFTEY
GLASSES
MAGNAFLOW:
1901 Corporate Centre Dr - Oceanside, CA 92056 |
1(800)990-09
05
Technical Support:
1(800) 959-9226 | Email: [email protected]
READ INSTRUCTIONS
THOROUGHLY BEFORE
INSTALLING PRODUCT
To ease removal of existing exhaust components
(especially on older vehicles) spray penetrating lubricant
on all fasteners and hangers/insulators that will be
loosened or removed and let soak before disassembly.
SPRAY LUBRICANT
WARNING:
When working on, under, or around any vehicle exercise caution. Please allow the vehicle’s exhaust system to cool
before removal, as exhaust system temperatures may cause severe burns. If working without a lift always consult vehicle manual
for correct lifting specifications. Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if
safety measures are not followed.
ATTENTION:
Always install any supplied band or V-band clamps to the proper torque specifications of 40-45
ft-lbs for band clamps and 70 in-lbs for V-band clamps. Over tightening will result in the clamp breaking and
will NOT be warranted by MagnaFlow.
MAGNAFLOW RECOMMENDS PROFESSIONAL INSTALLATION ON ALL THEIR PRODUCTS
1. [1] 2.50" Band Clamp
Hanger Tool
(Or Pry Bar)
15mm
PART NO. 19388
2018 JEEP WRANGLER JL 3.6L
Step 1:
To remove the OEM system first locate the
clamp in front of the rear Muffler Assembly(located
above the rear axle/sway bar)and loosen. With the
Muffler supported extract the hangers from the rubber
insulators and remove the muffler Assembly. Retain
rubber insulators to be re-used in new installation.
Step 2:
Begin installing the new system by attaching
the Muffler Assembly inlet to the OE outlet using the
supplied 2.50 clamp. Engage the welded hanger to
the rubber insulator. Keep all clamps and fasteners
loose until final adjustment
Step 3:
Once a final position has been chosen for the
new exhaust system, evenly tighten all clamps from
front to rear using the torque specifications on page
one of these instructions. Inspect all fasteners after
25-50 miles for operation and re-tighten if necessary.
19388 2/01/18 REV 000
MAGNAFLOW:
1901 Corporate Centre Dr - Oceanside, CA 92056 |
1(800)990-09
05
Technical Support:
1(800) 959-9226 | Email: [email protected]
  • Page 1 1
  • Page 2 2

MagnaFlow 19385 Installation guide

Brand
MagnaFlow
Model
19385
Type
Installation guide
This manual is also suitable for

MagnaFlow 19385 is a performance exhaust system designed to improve the sound, performance, and appearance of your vehicle. This system is made from high-quality materials and features a mandrel-bent design for maximum flow and performance. The MagnaFlow 19385 is easy to install and comes with all the necessary hardware.

Here are some of the benefits of installing a MagnaFlow 19385 performance exhaust system:

  • Improved sound: The MagnaFlow 19385 will give your vehicle a deep, throaty sound that is sure to turn heads.
  • Increased performance: The MagnaFlow 19385 will help your vehicle breathe better and produce more power.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents