Freestyle FS84851 User manual

Freestyle
Brand
Freestyle
Model
FS84851
Category
Watches
Type
User manual

This manual is also suitable for

whereitleftoff.
5.Toresettozero,pressS1buttontostop
counting,thenpressS2buttontoreset
thecountertozero.
NOTE:Youcanleavethestopwatchrunning
whileswitchingovertootheroperating
modes.
TO SET THE TIMER
1.RotateS3buttontoselectTIMERmode.
2.PressS2buttontoalterthetimersetting
among1,3,5,10,15,20,25,30,45and60
minutes.
TO USE THE TIMER
InTIMERmode,
1.PressS1buttontostartcounting.
2.Tostopcounting,pressS1buttononce.
PressS1buttonagaintoresumefrom
whereitleftoff.
3.ToreloadtheTIMER,pressS1buttonto
stopcountingandthenpressS2button.
4.Afterreachingzeroinacountdown,a
tunewillbeemitted.Tostopthetune,
pressanybutton,theTIMERwillreload
automatically.
NOTE:Youcanleavethetimerrunningwhile
switchingovertootheroperatingmodes.
TO USE THE BACKLIGHT
PressS4buttontoturnonthebacklightfor
around3seconds.
Toreducecarbonfootprint,these
Freestyleinstructionsareprintedwith
soyinksonrecycledpaper.
ENGLISH
S1.Start/stopButton
S2.Lap/resetButton
S3.Jogwheel/ModeButton
S4.LightButton
SPECIAL FEATURE
ThisFreestyleproductfeaturesunique
HydroPushers®:thesepusherscanbe
pressedunderwatertoadynamicwater
pressure(notwaterdepth)of3ATM.
DISPLAY MODES
Thewatchhasfourdisplaymodes:
HOMETIME(TIME)/FOREIGNTIME(TM-2),
HOMETIMEALARM(ALM1)/FOREIGN
TIMEALARM(ALM2),STOPWATCH(STW)
andCOUNTDOWNTIMER(TMR).
Tochangefromonedisplaymodeto
another,rotatethejogwheelorS3button
once.Themodedescriptionwillappear
for2secondsbeforetheselectedmodeis
activated.
Note:Thejogwheelcanberotatedclock-
wiseorcounterclockwise,butthemode
sequencewillonlyfolloworderlistedin
aboveDISPLAYMODESparagraph.
HOME AND FOREIGN DISPLAY
TodisplayFOREIGNTIME,pressS2button
whenHOMETIMEisdisplayed.Themode
description(TM-2)willappearshortlybefore
FOREIGNTIMEisdisplayed.Tochangeback
toHOMETIME,pressS2button.
TodisplayFOREIGNTIMEALARM,press
S2buttonwhenHOMETIMEALARMis
displayed.Themodedescription(ALM2)
willappearshortlybeforetheFOREIGN
TIMEALARMisdisplayed.Tochangebackto
HOMETIMEALARM,pressS2button.
TO SET THE TIME AND CALENDAR
1.RotateS3buttontoselecttimemode.
2.PressS2buttontotogglebetweenHOME
TIMEandFOREIGNTIMEmodetoset.
3.PressandholdS2buttonfor2seconds
untilthe“SET”messageappearsandthe
seconddigitswillblink.
4.PressS1buttontoresettheseconddigits
to00.
5.RotateS3button,theminutedigitswill
blink.
6.PressS1buttontosettheminutedigits.
Holdingdownthebuttonspeedupthe
process.
7.RotateS3button,thehourdigitswill
blink.
8.PressS1buttontosetthehourdigits.
9.Followthesamepatterntosetdate,
month,day(oftheweek),hourformat
andcalendarformat.
10.Tosetthehourformat,pressS1button
totogglebetween12-hourand24-hour
format.TheP.M.indicatormaybe
displayedtoindicatethetimeperiod
12:00P.M.–11:59P.M.in12-hour
format.
11.Tosetthecalendarformat,pressS1
buttontotogglebetweenM-D(month-
date)andD-M(date-month)format.
12.Whennishedmakingallthesettings,
pressS2buttontoconrm.
NOTE:Thechosenhourandcalendar
formatswillapplytobothHOMETIMEmode
andFOREIGNTIMEmode.
NOTE:InFOREIGNTIMEsettings,only
minutes,hours,date,monthanddayare
opentosetting.
TO DISPLAY THE CALENDAR
1.RotateS3buttontoselecttimemode.
2.PressS1buttontotogglebetweentime
displayandcalendardisplay.
Note:Calendarwillbedisplayedforaround
6secondsbeforethewatchswitchesback
totimedisplay.
TO SET THE ALARM TIME
1.RotateS3buttontoselectalarmmode.
2.PressS2buttontotogglebetweenHOME
TIMEALARMandFOREIGNTIMEALARM
modetoset.
3.PressandholdS2buttonfor2seconds
untilthe“SET”messageappearsandthe
minutedigitswillblink.
4.PressS1buttontosettheminutedigits.
Holdingdownthebuttonwillspeedup
theprocess.
5.RotateS3button,thehourdigitswill
blink.
6.PressS1buttontosetthehourdigits.
7.Whennishedmakingallthesettings,
pressS2buttontoconrm.
TO TURN ON/OFF THE ALARM AND
HOURLY CHIME
Inalarmmode,
1.PressS2buttontotogglebetweenHOME
TIMEALARMandFOREIGNTIMEALARM
modetoset.
2.PressS1buttononcetoactivatethe
alarm.Alarmindicator
will
appear.
3.Pressagaintoactivatethehourlychime.
Chimeindicator
willappear.
4.Pressthethirdtimetoactivateboth
functions.Bothoftheindicatorswill
appear.
5.Pressthefourthtimetodeactivateboth
functions.Bothoftheindicatorswill
disappear.
WHEN AN ALARM OR HOURLY CHIME
GOES OFF
Atunewillgooffbythehourifthehourly
chimefunctionisactivated.
Analarmtunewillbeemittedforaround20
secondsatthedesignatedtimewhenthe
alarmisactivated.Tostopthetune,press
anybutton.
TO USE THE STOPWATCH
1.RotateS3buttontoselectSTOPWATCH
mode.
2.Thestopwatchwillthenbedisplayedin
itscurrentstate–reset,running,or
stopped.
3.Toresumeacounting,pressS1buttonto
resumefromwhereitleftoff.
4.Tostartanewcounting,resetthestop
watchtozerorst.
PressS1buttontostopcounting,then
pressS2buttontoresetcountertozero.
Forthemeasurementofelapsedtime:
InSTOPWATCHmode,
1.PressS1buttontostartcounting.
2.Tostopcounting,pressS1buttononce.
PressS1buttonagaintoresumefrom
whereitleftoff.
3.Toresettozero,pressS1buttontostop
counting,thenpressS2buttontoreset
thecountertozero.
Forthemeasurementofsplittime:
InSTOPWATCHmode,
1.PressS1buttontostartcounting.
2.Whilethestopwatchisrunning,pressS2
buttononcetoregisteralap.Thestop
watchisstillrunninginthebackground.
Todisplaythecurrentlyaccumulated
time,pressS2buttonagain.
3.Repeatthelaststepuntilallthelapshave
beenregistered.
4.Tostopcounting,pressS1buttononce.
PressS1buttonagaintoresumefrom
FS1074-SPEEDDIAL-AG6873-R01
SPEED DIAL
S4 S1
S2
S3
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Freestyle FS84851 User manual

Freestyle
Brand
Freestyle
Model
FS84851
Category
Watches
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents