Bissell PROHEAT2X 20B4 User manual

2

Thank You

USER'S GUIDE

20B4 & 9500 SERIES

Product Registration

Safety Instructions

Product View

Assembly

Operations

Maintenance and Care

Warranty

Troubleshooting

Consumer Services

2

3

4-5

6

6-16

17-19

23

20

24

Replacement Parts

Accessories

21

22

Earn BISSELL Rewards!

Register your

product today!

See details on

page 2

English 1-24Español 25-48français 49-72

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Thanks for buying a BISSELL PROheat 2x

®

CleanShot

®

We’re glad you purchased a BISSELL ProHeat 2X CleanShot heated

formula deep cleaner. Everything we know about floor care went

into the design and construction of this complete, high-tech home

cleaning system.

Your BISSELL ProHeat 2X CleanShot is well made, and we back it

with a limited one year warranty. We also stand behind it with

a knowledgeable, dedicated Consumer Services department, so,

should you ever have a problem, you’ll receive fast, considerate

assistance.

My great-grandfather invented the floor sweeper in 1876. Today,

BISSELL is a global leader in the design, manufacture, and

service of high quality homecare products like your ProHeat 2X.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman, President & CEO

2

Registering is quick, easy and offers you benefits over the lifetime of your product.

You’ll receive:

BISSELL Rewards Points

Automatically earn points for discounts and free shipping on future purchases.

Faster Service

Supplying your information now saves you time should you need to contact us with

questions regarding your product.

Product Support Reminders and Alerts

We’ll contact you with any important product maintenance reminders and alerts.

Special Promotions

Optional: Register your email to receive notice of offers, contests, cleaning tips and more!

Visit www.bissell.com/registration now!

Don't forget to register your product!

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

IMPORTANT SAFETY INSTRUCTIONS

3

When using an electrical

appliance, basic precautions

should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

YOUR PROHEAT 2X

®

CLEANSHOT

®

.

WARNING:

To reduce the risk of fire,

electric shock, or injury:

■

Do not immerse.

■

Use only on surfaces moistened by cleaning process.

■

Always connect to a properly grounded outlet.

■

See Grounding Instructions.

■

Unplug from outlet when not in use and before conducting

maintenance or troubleshooting.

■

Do not leave machine when it is plugged in.

■

Do not service machine when it is plugged in.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water, have it repaired at

an authorized Service Center.

■

Use indoors only.

■

Do not pull or carry by cord, use cord as a handle, close door on

cord, pull cord around sharp corners or edges, run appliance over

cord, or expose cord to heated surfaces.

■

Unplug by grasping the plug, not the cord.

■

Do not handle plug or appliance with wet hands.

■

Do not put any object into appliance openings, use with blocked opening, or

restrict air flow.

■

Do not expose hair, loose clothing, fingers or body parts to

openings or moving parts.

■

Do not pick up hot or burning objects.

■

Do not pick up flammable or combustible materials (lighter fluid, gaso-

line, kerosene, etc.) or use in the presence of explosive liquids or vapor.

■

Do not use appliance in an enclosed space filled with vapors

given off by oil base paint, paint thinner, some moth proofing

substances, flammable dust, or other explosive or toxic vapors.

■

Do not pick up toxic material (chlorine bleach, ammonia, drain

cleaner, gasoline, etc.).

■

Do not modify the 3-prong grounded plug.

■

Do not allow to be used as a toy.

■

Do not use for any purpose other than described in this User’s Guide.

■

Do not unplug by pulling on the cord.

■

Use only manufacturer’s recommended attachments.

■

Use only cleaning products formulated by BISSELL for use in this

appliance to prevent internal component damage. See the cleaning

fluid section of this guide.

■

Keep openings free of dust, lint, hair, etc.

■

Do not point attachment nozzle at people or animals

■

Keep appliance on a level surface.

■

Turn off all controls before unplugging.

■

Unplug before attaching the TurboBrush

®

.

■

Be extra careful when cleaning stairs.

■

Close attention is necessary when used by or near children.

SAVE THESE

INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE

ONLY.

GROUNDING

INSTRUCTIONS

This appliance must be connected to

a grounded wiring system. If it should

malfunction or break down, grounding

provides a safe path of least resistance

for electrical current, reducing the risk of

electrical shock. The cord for this appli-

ance has an equipment-grounding con-

ductor and a grounding plug. It must only

be plugged into an outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.

WARNING:

Improper connection of the equipment-

grounding conductor can result in a risk

of electrical shock. Check with a qualified

electrician or service person if you aren’t

sure if the outlet is properly grounded.

DO NOT MODIFY THE PLUG. If it will

not fit the outlet, have a proper outlet

installed by a qualified electrician. This

appliance is designed for use on a nomi-

nal 120-volt circuit, and has a grounding

attachment plug that looks like the plug in

the drawing above. Make certain that the

appliance is connected to an outlet hav-

ing the same configuration as the plug.

No plug adapter should be used with this

appliance.

Grounded

Outlets

Grounding Pin

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

4

CleanShot

®

Trigger

Extra Long

Power Cord

Heat

Indicator Light

Easy Carry

Handle

Tank Carry

Handle

Upper Handle

ReadyTools

™

Dial

Flex Hose

CleanShot

®

Heater Switch

Easy To Remove

Nozzle

Edge Sweep

®

Brushes

Dry Aire

™

select models only

Lower Base

2-in-1

Water Tank

Product view

Spray Trigger

Custom Clean

®

Dial

Power Switch

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Upper Hose

Rack

Crevice Tool

Holder

Hose secure

Latch

Lower Hose

Rack

Detent Pedal

Formula Tank

Product view

5

Cleaning fluid

Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever

it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL

cleaning solutions may harm the machine and will void the warranty.

BISSELL

2X Fiber

Cleansing

Formula with

Scotchgard

™

Protection

BISSELL

2X Allergen

Cleansing

Formula

BISSELL

2X Pet Stain

and Odor

Removal

Formula with

Scotchgard

™

Protection

BISSELL

2X Natural

Orange

Formula

BISSELL

Tough

Stain

PreCleaner

BISSELL

2X Hard

Floor

Solutions

Formula

BISSELL

2X Lavender

Essence

Formula

BISSELL

2X

Professional

Deep

Cleaning

Formula with

Scotchgard

™

Protection

WARNING:

To reduce the risk of fire

and electric shock due to

internal component

damage, use only BISSELL

cleaning fluids intended

for use with the deep

cleaner. Non-BISSELL

cleaning solutions may

harm the machine and

void the warranty.

Spray Trigger

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Assembly

6

Operations

Your ProHeat 2X CleanShot comes in

three, easy to assemble components:

Upper Handle

Lower Handle

Tool Caddy

The only thing you will need to

assemble your cleaner is a Phillips

head screwdriver.

1. Slide upper handle onto lower handle.

2. Screw 3 screws into the marked holes.

3. Place upper hose rack onto back of

upper handle, and secure with screw.

4. Place lower hose rack onto back of

upper handle by pushing in and sliding

down until it snaps into place.

5. Snap tools into the tool caddy.

6. Wrap power cord and flex hose.

7. Keep flex hose snugly in place by using

the hose secure latch.

ProHeat 2X assembly is now

complete.

Special features

Your BISSELL ProHeat 2X CleanShot

deep cleaner is a home cleaning system

that uses the power of heat, brushes

and cleaning formula to get the deep

down dirt for a maximum clean. Not

only does it come with a lot of unique

features, it has been designed with

you, the customer, in mind.

Built-in-heater feature

BISSELL ProHeat 2X models all feature

a patented built-in heater which will

heat the hot tap water you put in up

to 25 degrees hotter to safely optimize

cleaning effectiveness. The heater will

never allow the temperature to exceed

190 degrees. The heater switch on the

front of the machine controls the heater

so you have the option to turn off the

heat if you are cleaning delicate wool

or oriental rugs.

Hose Secure Latch

1.

3.

2.

4.

7.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

7

Operations

Custom Clean

®

The Custom Clean feature automatically

mixes hot tap water with the BISSELL for-

mula. Simply choose one of the 4

settings (heavy traffic, normal clean, light

clean, or water rinse) and the ProHeat 2X

CleanShot will adjust the right amount of

cleaning solution to mix with the heated

water to fit your cleaning need.

CleanShot

®

The CleanShot feature gives you the ability

to tackle tough stains with the push of a

button. Cleaning solution is sprayed in a

concentrated stream, penetrating the stain

and allowing for better cleaning focus.

Simply spray and suction and the stain

is gone! CleanShot is especially effective

for spots and stains that would other-

wise take a lot of deep cleaning cycles to

remove. It allows the cleaning formula

and machine to do the work for you.

Dry Aire™ (select models only)

The Dry Aire system spreads hot air

across the carpet to aid in drying. The

feature runs while your machine is

powered.

Flow indicator (select models only)

The flow indicator is located on the rear

cover of your unit. When the unit runs

out of water or solution the flow indica-

tor will instantly let you know

2-in-1 water tank

Our 2-in-1 water tank full capacity system

is designed with a heavy duty bladder

inside for clean water. As you clean, the

clean water in the bladder will empty

and mix with the cleaning formula. Dirty

water pulled out of your carpets will

collect around the outside of the bladder

so that clean and dirty water are always

kept separate. This allows the user to only

carry one tank to and from the sink for

emptying and filling.

Flow Indicator

(located on upper handle)

CleanShot

®

Dry Aire™

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations

8

ReadyTools™ dial

This provides either floor cleaning or

above floor cleaning with the turn of a

knob. Choose "TOOLS" setting for stairs,

upholstery and hard to reach areas and

"FLOOR CLEANING" for carpets area

rugs and bare floors.

Scotchgard

™

Protector

Carpet protection applied at the mill typi-

cally wears down over time from heavy

foot traffic and everyday

cleaning, including deep cleaning. To help

restore this important protection, only

BISSELL offers deep cleaning formulas

with Scotchgard protector. This offers

extra protection against dirt and tough

stains to keep your carpets

looking good longer.

To maintain your Scotchgard 5-year

limited stain warranty, you no longer

are required to hire a professional. By

using your BISSELL ProHeat 2X machine

with BISSELL 2X formulas containing

Scotchgard protector every 12 months,

your carpet warranty from 3M remains

in effect. No other home deep

cleaning system can do this for you. Refer

to the Scotchgard protector

warranty for details.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

9

Operations

Before you clean

1. Move furniture to another area if

cleaning an entire room (optional).

2. Vacuum area with a dry vacuum

cleaner thoroughly before deep cleaning.

3. Plan your cleaning route to leave an exit

path. It is best to begin cleaning in the

corner farthest from your exit.

4. Pretreating (optional)

Pretreating is recommended to improve

cleaning effectiveness for heavily soiled

carpet in high traffic areas such as

entryways and hallways.

Option A: BISSELL Tough Stain PreTreat

A. Spray the BISSELL Tough Stain

Pre-treat formula onto heavy traffic

areas, soiled areas, or stains.

B. Allow to penetrate for at least 3 minutes.

C. Clean as normal, using the BISSELL

ProHeat 2X machine on the high

traffic setting, following the

instructions below.

Option B: CleanShot

Follow instructions on page 12.

ATTENTION:

Some Berber carpets have a

tendency to fuzz with wear.

Repeated strokes in the same

area with an ordinary vacuum

or deep cleaner may aggra-

vate this condition. Please see

Stain Removal instructions on

page 14.

B

R

U

SH

S

U

C

TIO

N

1

START

HERE

——— 4'———

2

3

4

8

7

6

5

9

10

11

12

EXIT

——— ———

3'

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations

10

Carpet cleaning

1. Fill the 2-in-1 Water Tank. Remove the tank

from the base of the machine by lifting up

the tank carry handle. Carry like a bucket

to the sink.

1a. Unlatch the top of the tank from the

bottom by lifting up on the tank latch

located on the back of the tank.

1b. Remove the top of the tank by lifting up

on the handle.

Note how the lip on the top tank

separates from the groove in the

bottom tank. This placement is

important when putting the tank

back together.

1c. Fill the heavy duty bladder with clean

hot tap water.

*Do not boil or microwave water

as it can destroy the bladder.

1d. Leaving the filled bottom of the tank on

a flat surface, only maneuver the top of

the tank. To attach the top part of the

tank to the bottom, carefully hook the lip

on the top tank into the groove on the

bottom tank.

1e. Fasten tanks together by securing the

latch in the back.

Note: Remember to secure the tank

latch in the back and test to make

sure it is secure before picking up

the tank.

2. Remove formula tank from back of

machine.

3. Fill the formula tank by first unscrewing

the cap and insert. Always use genuine

BISSELL 2X formulas to maximize clean-

ing and for the safety of your machine.

Fill with water to WATER line and then

fill up to FORMULA line with BISSELL 2X

Concentrated formula. Replace formula

tank.

4. Set Custom Clean Dial. Simply choose

one of the 4 settings (heavy traffic,

normal clean, light clean, or water

rinse).

5. Set ReadyTools Dial to the floor cleaning

setting.

3.

1.

1b.

1a.

1c.

1d.

1e.

4. 5.

2.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

11

Operations

Carpet cleaning continued

6. Plug into a proper outlet and turn the power

and heater switches to the ON ( I ) posi-

tion. Allow 1 minute for the built-in heater to

warm-up before cleaning. The ProHeat 2X

will be fully warmed and will provide opti-

mal performance after a minute of

continuous heated cleaning.

7. Cleaning Strokes. While pressing the trig-

ger, make one slow forward wet pass and

another one back. Caution: Do not

overwet. Take care not to run over loose

objects or edges of area rugs. Stalling

brush may result in premature belt failure.

Note: Your machine is equipped

with a circuit breaker that will

automatically shut off the brush if

a large or loose object is caught

in the brush roll. If that happens,

be sure to unplug your machine,

remove the foreign object, and

then plug the machine back in to

reset the circuit breaker.

Release the trigger and make one slow

forward and backward pass over the

same area to remove any residual

dirty water and aid in drying. Repeat

cleaning passes until solution being

pulled up appears clean. Continue

passes without pressing the trigger until

you can’t see any more water being

pulled up.

8. Remove the tank from the base of the

machine by lifting up on the tank carry

handle. Carry like a bucket to a utility sink

or outside where you will dispose of the

dirty water.

8a. Unlatch the top of the tank from the

bottom by lifting up on the tank latch

located on the back of the tank.

8b. Remove the top of the tank by lifting up on

the handle.

Note how the lip on the top tank

separates from the groove in the

bottom tank. This placement is

important when putting the tank

back together.

6.

WARNING:

To reduce the risk of due to inter-

nal component damage, use only

BISSELL cleaning fluids intended

for use with the deep cleaner.

Power Switch

Heater Switch

Keep plenty of genuine

BISSELL 2X formula on hand

so you can clean whenever it

fits your schedule. Always use

genuine BISSELL deep cleaning

formulas. Non-BISSELL

cleaning solutions may harm

the machine and void the

warranty.

8.

8b.

8a.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations

12

Carpet cleaning continued

8c. Lift the bottom portion of the tank; pour out

dirty water in the sink through the triangular

shaped opening in the corner of the tank.

Note: You may notice hair & debris

deposits on the carpet or in the tank

that were loosened by the cleaning

action. This debris should be picked

up and thrown away.

8d. Fill the heavy duty bladder with clean

hot tap water, following instructions 1c

through 1e on page 10.

Note: Remember to secure the

tank latch in the back and test

to make sure it is secure before

picking up the tank. Always check

the level of cleaning formula in

the formula tank at the same time,

and refill as needed.

9. Water rinse (optional). Rinsing is an option-

al step that can be done during the clean-

ing process or after the carpeted area has

been completed. Switch to the water rinse

setting, on the Custom Clean dial and

follow the same path as you did for clean-

ing. Take care to do a forward (wet) stroke

by depressing the trigger, and a backward

(wet) stroke, followed by a forward and

backward (dry) stroke, releasing the trigger.

Continue this until the water you see coming

up the nozzle is clear. (see page 17.)

10. CleanShot. CleanShot is an optional fea-

ture that can be used to fight tough stains. It

can be used as either a tough stain pre-treat

or can be used during the deep cleaning

process itself. To use CleanShot either as a

pre-treat or during deep cleaning, follow the

instructions below.

A. Set Custom Clean for the desired

setting.

B. Press the CleanShot button and

aim the focused stream onto the

stain. Allow the formula to soak in

for 30 seconds.

C. Run the machine over the stain to

extract. Repeat as needed until the

stain is gone.

D. Rinse if desired.

8d.

10B.

8c.

9.

Keep plenty of genuine

BISSELL 2X formula on hand

so you can clean whenever it

fits your schedule. Always use

genuine BISSELL deep cleaning

formulas. Non-BISSELL

cleaning solutions may harm

the machine and void the

warranty.

Clean Shot

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

13

Operations

Cleaning with attachments

Your ProHeat 2X machine comes

equipped with a hose and at least

one attachment for cleaning stairs,

upholstery, and more.

1. Important! If using to clean uphol-

stery, check upholstery tags.

A. Check manufacturer’s tag before clean-

ing. “W” or “WS” on the tag means

you can use your ProHeat 2X. If the tag

is coded with an “X” or an “S” (with a

diagonal stripe through it), or says “Dry

Clean Only”, do not proceed with any

deep cleaning machine. Do not use

on velvet or silk. If manufacturer’s tag is

missing or not coded, check with your

furniture dealer.

B. Check for colorfastness in an incon-

spicuous place.

C. If possible, check upholstery stuffing.

Colored stuffing may bleed through

fabric when wet.

D. Plan activities to allow upholstery

time to dry.

E. Vacuum thoroughly to pick up loose

debris and pet hair. Use a vacuum

with a brush attachment and a crevice

tool to clean in fabric folds.

2. Follow the instructions on page 10 for filling

the 2-in-1 water tank and the formula tank.

3. Set ReadyTools dial to the "TOOLS"

setting. This will allow spray and suction

from the hose.

4. Set custom clean dial for heavy traffic,

normal clean, light clean, or water rinse

as desired.

5. Attach the cleaning tool to the end of the hose.

6. Plug in and turn on the power switch and

heater (if desired).

7. Clean by pressing the trigger to spray

solution onto the area to be cleaned.

Slowly move the tool back and forth over

the soiled surface. Release the trigger to

suction soiled water. Continue to clean in

the area, working in small sections, until no

more dirt can be removed. Rinse (optional)

and suction as needed.

Caution: Do no overwet.

Adsdfdd ghg bvh

cvbbj jkn hnbj jkvh

gcghhjj jhffhl kllgh

Manufacturer’s tag

5.

WARNING: To reduce the

risk of injury, be extra careful when

cleaning stairs. Make sure machine is

secure and level.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations

14

8. Remove and rinse tools in clean, running

water. Dry and replace in the tool caddy.

9. It is recommended that you suction clean

water from a bowl to rinse out the hose.

10. Before replacing lift end of hose and

stretch out to ensure all water is cleared

from hose.

11. Coil flex hose around the tool caddy.

12. Empty 2-in-1 water tank and rinse out,

following the instructions on page 12.

13. Return ReadyTools dial to floor setting.

Deep reach tool attachment

(Select models only)

Do Not Delay! Attending to an acci-

dent soon after it occurs ensures the

most optimal clean. Leaving it for an

extended period of time may cause

it to set and become permanent.

1. Follow the instructions on page 10 for filling

the 2-in-1 water tank and the formula tank.

2. Follow instructions 3-6 on page 13 under

"Cleaning with attachments".

3. Set tool on stain and press the trigger to

spray solution onto the area to be cleaned.

4. Slowly move the tool back and forth

over the soiled surface, keeping the tool

in contact with the carpet.

5. Release trigger and move tool slowly

over the soiled area to suction up water

and dirt.

6. Continue to clean the area, working in

small sections, until no more dirt can be

removed.

7. Remove tool from hose when nished.

Clean under warm water before storing.

Cleaning with attachments continued

10.

3.

5.

7.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

15

Operations

Stain removal

Do Not Delay! Attending to an

accident soon after it occurs ensures

the most optimal clean. Leaving it

for an extended period of time may

cause it to set and become

permanent.

1. Blot up liquids with an absorbent cloth or

paper towels. White materials are recom-

mended because certain dyes may bleed

and make the stain worse.

2. Gently scrape up any semi-solids with a

spoon or spatula. Do not use a knife or other

utensil with sharp edges because it could

damage the carpet or upholstery.

3. If the area has dried, remove the

remaining semi-solids and residue with a

sweeper or vacuum.

4. Be sure to test any spot removal formulas

in an inconspicuous area first. This is

important as some dyes and materials

could be damaged or discolored by

cleaning solvents. If such a change should

occur, try a different solution or call a pro-

fessional.

5. If cleaning on Berber carpeting, gently

run your machine over a hidden area. If

no fuzzing occurs, continue cleaning in

soiled area.

6. Using the BISSELL Tough Stain PreCleaner,

spray evenly over soiled area. Do not

overwet. Wait 3-5 minutes. Gently work

the solution by blotting area with a clean,

damp, color safe cloth.

7. CleanShot. CleanShot is an optional

feature that can be used to fight tough stains.

It can be used as either a tough stain

pre-treat or can be used during the deep

cleaning process itself (see page 12).

8. Clean using either the FLOOR

CLEANING, or TOOLS setting on the

ReadyTools dial.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations

16

Hard floor cleaning

Your ProHeat 2X model may have

come with a hard floor attachment

and 2X Hard Floor Solutions Formula.

If not, these products are available

for purchase by contacting the BISSELL

Consumer Services department by

phone or at the website. The hard floor

tool provides effective cleaning for lino-

leum, vinyl, and tile floors. Caution: Do

not use on unsealed hardwood floors.

1. Vacuum or sweep thoroughly to pick up

any loose debris and pet hair.

2. Move any furniture, if needed.

3. Fill the formula tank to "WATER" line

with water. Fill to "FORMULA" line with

BISSELL 2X Hard Floor Solutions.

4. Fill the 2-in-1 water tank with hot tap

water and set aside.

5. Attach the hard floor tool onto the bot-

tom of the machine by hooking it into

the nozzle and swinging it down until it

clicks into place.

6. Set ReadyTools dial to the "FLOOR

CLEANIING" setting.

7. Set the Custom Clean dial to normal clean.

8. Plug into an outlet and turn the power

switch and heater ON ( I ).

9. Slowly move the machine forward and

back over hard floor surface one time

while depressing trigger.

Caution: Do not overwet.

10. Repeat the motion without pressing the

trigger using the hard floor tool to squee-

gee and suction up the dirty water.

11. Allow adequate time for floors to dry.

12. Remove hard floor tool, rinse and dry

before storing.

13. Rinse out the formula tank.

WARNING:

To reduce the risk of fire, elec-

tric shock or injury unplug from

outlet before servicing.

WARNING:

To reduce the risk of fire

and electric shock- when clean-

ing a hard floor, the BISSELL hard

floor tool 203-5642 must be used

and it must only be used with

BISSELL Hard Floor Solutions or

BISSELL 2X Hard Floor Solutions

cleaning fluid intended for use with

this appliance.

5.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

17

Maintenance and care

Machine storage

Once your cleaning is complete,

make sure the 2-in-1 water tank is

emptied, rinsed out, and dried before

the next use. The formula tank can

remain filled and ready to go.

Note: Store cleaner in a protected,

dry area. Since this product uses

water, it must not be stored where

there is a danger of freezing.

Freezing will damage internal

components and void the warranty.

Machine care

For best results, a few simple steps can

assure your machine is well maintained

after your cleaning is complete.

1. Flush your machine of any remaining

residual solution.

A. Fill the 2-in-1 clean water tank with

clean hot tap water.

B. Plug your machine into a proper outlet

and set the Custom Clean dial to the

rinse setting. Turn the power on by

pressing the power button.

C. Recline the handle and press the spray trig-

ger for 15 seconds while making forward

and backward passes on carpet. Release the

trigger to suction. Repeat for another 15 sec-

onds. Continue without pressing the trigger

until there is no more water being suctioned.

2. Turn power and heater switches OFF (O).

Unplug the machine and wrap the power

cord. Empty the 2-in-1 water tank.

3. Rinse out 2-in-1 water tank, with running hot

tap water, taking care to clean underneath

the heavy duty bladder, and all around it.

4. The top half of the tank can be rinsed clean

through the nozzle area. Also, pop out the

red filter underneath the top half of the tank

and rinse out. Replace before putting the

top and bottom halves of the tank together.

5. Before you place the cleaned 2-in-1 water

tank back onto the machine, simply unscrew

the floor nozzle using a Phillips head

screwdriver. This can be rinsed out at the

faucet. Then replace back onto the machine

by starting from the bottom of the nozzle and

hooking the tabs into the holes on the bottom

sides of the machine. Secure into place with

the screw.

3 & 4

WARNING:

To reduce the risk of fire,

electric shock or injury

unplug from outlet before

servicing.

Filter

Tip:

Let all parts dry com-

pletely before storing

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Maintenance and care

18

Machine care continued

6. The inside of the end caps by the brush

rolls can be wiped out with a clean paper

towel, or, if a more thorough cleaning is

desired, the end caps can be taken off

using a Phillips head screwdriver and

rinsed clean. Replace after cleaning.

7. Any loose hair or debris can be pulled from

the brush rolls and thrown away. For the

most thorough clean before storage, follow

directions on pages 18 & 19 for removal

and replacement of the brush rolls and belts.

8. To clean attachments that may have been

used, remove from hose and rinse under

clean, running water. Dry and replace

attachment in the tool caddy. Clean the

hose by suctioning clean water from the tap.

Before replacing, lift end of hose and stretch

out to ensure all water is cleared from hose.

Refer to page 14.

9. After carpet is dry, vacuum again to

remove hair and fuzz.

Occasional replacement of one or

both belts may become necessary.

If that is needed, please follow the

instructions below.

1. Turn off the machine, and unplug it from

the outlet.

2. Remove both the 2-in-1 water tank and

the formula tank. Set aside.

3. Unscrew the front nozzle and remove it.

Set aside.

4. Turn the machine on its side.

IMPORTANT: cord side down.

5. Remove the clear end cap by unscrew-

ing the 2 black screws. Take care not to

drop the screws into the unit.

6. Remove 1 silver screw.

7. Remove pivot arm by gently lifting up.

8. Remove small brush belt.

9. Replace small brush belt, and reverse

steps above.

3.

5.

4.

7.

9.

2.

6.

8.

WARNING:

To reduce the risk of fire, electric

shock, or injury,turn power

OFF and disconnect plug from

electrical outlet before performing

maintenance or troubleshooting.

Small belt removal and replacement

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

19

Maintenance and care

Brushes can be removed for cleaning

or replacement as needed.

1. Follow small belt removal Instructions on

page 18.

2. Remove brush rolls by pulling them off

of the metal rods.

3. Place cleaned or new brush rolls back

onto the rods. Make sure one washer is

on each end of the rollers prior to sliding

onto the rod. Be sure to let the rod slide

through the bushing to insure proper fit.

4. Re-attach the long belt on the bottom to

the cogs of the small roller brushes.

5. Place small belt over back roller and

metal cog.

6. Place pivot arm in place and screw in

place using the silver screw.

7. Re-attach clear end cap by tightening

with the (2) black screws.

8. Return front nozzle to front of unit, by

latching from underneath and then

securing with a screw.

If you have any questions or are having

trouble installing or replacing your

belt(s) or brushes, please call BISSELL

Consumer Services at 1-800-237-7691.

2.

4.

6.

8.

3.

5.

7.

Brush removal and large belt replacement

WARNING:

To reduce the risk of fire,

electric shock or injury,

unplug from the outlet

before servicing.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Troubleshooting

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

20

Built-in heater ready light does not illuminate

Possible causes Remedies

1. The heater switch is not turned ON ( I ) 1. Turn the heater switch ON ( I )

2. The power switch is not turned ON ( I ) 2. Both switches must be ON ( I ) to activate the

heater ready light

Reduce Spray or No Spray

Possible causes Remedies

1. Water tank may be empty 1. Fill heavy duty bladder with hot tap water

2. Formula tank may be empty 2. Fill formula tank with BISSELL 2X

Formula for cleaning

3. Tank may not be seated completely 3. Turn power OFF (0). Remove and reseat tank

4. Pump may have lost prime. 4. Turn power OFF (0) and then back ON (I). Wait one minute,

then depress trigger

DirtLifter

®

PowerBrush does not turn

Possible causes Remedies

1. The belt is off or broken 1. Turn power OFF ( O ) and unplug unit from outlet. Follow

instructions on page 19

2. The unit is in the upright position 2. Brushes only rotate when unit is reclined using the

detent pedal

3.

Circuit breaker on machine may have tripped

3. Turn the machine OFF ( O ) and unplug from outlet. Check

to see if foreign object is caught in brush roll. Remove

object. Plug machine in to reset circuit breaker

Cleaner not picking up solution

Possible causes Remedies

1. ReadyTools dial may be at wrong setting 1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS setting

2. Tank may not be seated properly 2. Pick up both the 2-in-1 water tank and formula tank and

reseat them so they fit snugly on the unit

3. Tank may not be assembled properly 3. Check to make sure the "lip" of the nozzle is securely

hooked into the groove on bottom of Tank (see page 10)

4. Solution or 2-in-1 water tank is empty 4. Check fluid levels in heavy duty bladder and formula tank.

5. 2-in-1 water tank has picked up maximum dirty water 5. Empty 2-in-1 water tank. Refill heavy duty bladder with

and red float door has closed. clean hot tap water and replace.

6. Red float "door" in the tank may have closed as a result of bumping 6. Turn the machine OFF ( O ), allowing red float door to release

an object or moving machine back and forth too quickly into the open position. Turn unit back ON ( I ) to continue

cleaning. Be sure your forward and backward strokes are done

at a slower pace.

Other maintenance or service not included in the manual should be

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of

service. Contact us directly at 1-800-237-7691.

Page is loading ...

Bissell PROHEAT2X 20B4 User manual

This manual is also suitable for

Bissell PROHEAT2X 20B4 User manual

in other languages

Related papers

Other documents