8
•Turn the knob condensate drain off the spout. Place a container
under the spout and pull the rubber plug from the spout. The water
owsout,whenthebowlisfull,inserttheplug,emptythesumpand
drain the rest of the water.
•Ifthecondensationmustberemovedcontinuously,placethe
condensation drain hose on the spout. Do remove the rubber plug.
The condensate drain hose can be extended with another hose (not
supplied).Itcanbeconnectedtoadrainorbeledoutside.Make
sure this hose does not go up.
uSe
•Always place the plug into a grounded socket.
•PressON/OFFbutton,theunitwillworkincoolmodewithlowfan
speed, the pre-setting temperature is 24°C.
•Indicatorsofthefunctionsinprogresscomeonatthesametime.
*NOTE!Thedisplaywindowshowstheambientroomtemperature
from 0oC to 50oC
•Toturntheunitoff,pressON/OFFbuttonagain.
Setting mode/funCtion
•PressMODEbuttontoselectrequiredworkingmode:cooling,orfan.
•Sign of your selected mode comes on.
Setting temPerAture
•Press 'Temperature up' or 'Temperature down' button to regulate
the temperature you desired.
•The display window will show the temperature you set as you press
'Temperature up' or 'Temperature down' button. Otherwise, it will
always show the ambient temperature.
•The pre-setting temperature of this machine is: 24°C for cooling.
Setting VentilAtion SPeed
PressSPEEDbuttontochoosetheventilationspeedyouneed,highor
low. The sign of high or low ventilation will light on at the same time.
Setting timer
•PressTIMERbuttontosettheoperatinghoursyoudesired(1to24
hours, the sign of timer will light on). When the set time has been
reached, the machine will turn off automatically. The display window
willshowthehour(s)yousetasyoupressTIMERbutton.Ifthe
timer button is not pressed, the unit will work continuously.
•By pressing the timer but without turning on the other functions, you
canPRE-SETthetimeforthemachinetowork.Forexample,ifyou
press the timer to '2', the unit will work automatically after 2 hours.
SleeP funCtion
•Incoolingmode,bypressingtheSLEEPbutton,theset
temperature will increase 1oC at the 1st hour, another 1 oC at the
second hour, then keeps at that temperature.
•Insleepmode,theventilationwillkeepatlowspeed.Re-pressthe
SLEEPbutton,thesettingtemperatureandventilationspeedwill
return to the pre-selected one.
•TheunitwillshutdownautomaticallyaftertheSLEEPfunction
running for 12 hours.
•Please note, the sleep function is not available while the machine
isworkinginventilation,dehumidicationorautomode.Only
available in the Cooling mode.