Kohler K-7825-K-CP Installation guide

Category
Sanitary ware
Type
Installation guide

The Kohler K-7825-K-CP is a kitchen sink faucet that combines style and functionality. It features a pull-down spray head for easy cleaning and rinsing, and a two-function spray pattern for added versatility. The faucet also boasts a high-temperature limit stop to prevent scalding, and a water-saving aerator to reduce water consumption. With its durable construction and sleek design, the Kohler K-7825-K-CP is a great choice for any kitchen.

The Kohler K-7825-K-CP is a kitchen sink faucet that combines style and functionality. It features a pull-down spray head for easy cleaning and rinsing, and a two-function spray pattern for added versatility. The faucet also boasts a high-temperature limit stop to prevent scalding, and a water-saving aerator to reduce water consumption. With its durable construction and sleek design, the Kohler K-7825-K-CP is a great choice for any kitchen.

Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
Observe all local plumbing and building codes.
Shut off the water supplies.
Before installation, unpack the new faucet and inspect it for
damage. Return the faucet to the carton until you are ready to
install it.
Carefully inspect waste and supply tubing for any sign of
damage and replace if necessary.
For new installations, assemble the faucet to the sink before
installing the sink.
Kohler Co. reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.
Adjustable
Wrench
Plumbers
Putty
Tube Cutter
111058-2-AC 2 Kohler Co.
1. Install the Faucet
Apply a bead of plumbers putty or other sealant to the underside
of the undercover according to the putty or sealant
manufacturer’s instructions.
Install the spacers and plastic locknuts from the underside of the
sink.
Hand tighten the plastic locknuts. Do not tighten with a wrench.
2. Install the Handspray
For K-7827 Models Only
Apply a bead of plumbers putty or other sealant to the underside
of the spray holder according to the manufacturer’s instructions.
Insert the spray holder into the sink hole.
From under the sink, securely hand tighten the nut.
Remove any excess putty or sealant.
Insert the handspray hose through the spray holder.
Undercover
Spray Holder
Apply plumbers putty.
Hose
Spacer
Apply plumbers putty.
Plastic Locknut
Plastic Locknut
Kohler Co. 3 111058-2-AC
3. Install the Supplies
NOTE: If the supply tubes need to be cut, allow for required
penetration of the tube into the supply stop.
NOTE: If the sink is not installed, install it at this time. Be sure to
follow all instructions packed with the sink.
Remove the burrs from all tubing cuts.
Slip the coupling nuts onto the supply tubes.
Position the round end of the supply tube (either flared or
ferrule) squarely into the valve body inlet.
Hand tighten the coupling nuts.
Carefully bend the supply tubes to align them with the supply
stops.
Slide the coupling nuts and ferrules from the stops onto the
supply tubes.
Insert the supply tubes into the outlets of the shut-off valves.
Tighten the coupling nuts on the shut-off valves.
Turn on the water supply.
Valve
Body Inlet
Ferrule or
Flared End
Coupling
Nut
Supply Tube
Ferrule
Coupling Nut
Supply Tube
Supply Stop
Valve
Body Inlet
111058-2-AC 4 Kohler Co.
4. Installation Checkout
Ensure that both faucet handles are turned off. Hot is clockwise
close and cold is counterclockwise close.
Turn on the hot and cold water supplies.
Check for leaks.
Remove the aerator by turning it counterclockwise.
Turn on the hot and cold faucet handles for one minute to flush
debris from the faucet.
Close the hot and cold faucet handles.
Reattach the aerator by turning it clockwise until hand tight.
Spout
Aerator
Kohler Co. 5 111058-2-AC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Kohler K-7825-K-CP Installation guide

Category
Sanitary ware
Type
Installation guide

The Kohler K-7825-K-CP is a kitchen sink faucet that combines style and functionality. It features a pull-down spray head for easy cleaning and rinsing, and a two-function spray pattern for added versatility. The faucet also boasts a high-temperature limit stop to prevent scalding, and a water-saving aerator to reduce water consumption. With its durable construction and sleek design, the Kohler K-7825-K-CP is a great choice for any kitchen.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI