Feiss OL14310 Installation guide

Type
Installation guide
1
Installation Instructions for
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1.0
OL14310-OL14311-WB1884
OL14310, OL14311, WB1884
Wall/Outdoor
1A
7
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
OL14310 & are safety listed for wet locations.OL14311
WB1884 is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
Patrice Wall
Open the door on the fixture.
Install the candle tubes by sliding them over the sockets.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Close the door.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
LAMP
FIXTURE
4
CANDLE TUBE
2
CANDLE FOLLOWER
5
6
3
4
7
DOOR
SAVE THESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2018 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss OL14310 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI