Simrad IS40 Display & OP10 Autopilot Controller Quick start guide

Type
Quick start guide

This manual is also suitable for

Simrad IS40 Display & OP10 Autopilot Controller empowers boaters with cutting-edge technology for precise navigation and effortless control. Experience intuitive sailing with features like Auto mode for automated steering, Wind mode for sailing efficiency, and Navigation mode for accurate course-keeping. Customize your display with eight default pages, including the autopilot page, to monitor essential data. Take command with the OP10 controller, featuring dedicated keys for course adjustment and easy mode switching.

Simrad IS40 Display & OP10 Autopilot Controller empowers boaters with cutting-edge technology for precise navigation and effortless control. Experience intuitive sailing with features like Auto mode for automated steering, Wind mode for sailing efficiency, and Navigation mode for accurate course-keeping. Customize your display with eight default pages, including the autopilot page, to monitor essential data. Take command with the OP10 controller, featuring dedicated keys for course adjustment and easy mode switching.

IS40 Display & OP10 Autopilot Controller
Quick Reference Guide
AUTO
10 10
11
MODE
STBY
IS40 Display Keys
Menu / Enter / Lighting: Used to enter the main menu, select sub menus and
confirm selection. Note: Press and hold the Enter key for 3 seconds takes you directly
to the display setup lighting level screen. If the lighting level is set below 5 it will
automatically increase to 5. Use the up and down keys to set the desired level and
press Enter to confirm.
Page: Scrolls through the eight default display pages and navigates back a step in
menus. Note: the eight default display pages including the autopilot page can be
customized to display the required data.
Directional keys: Scrolls up and down through selected menus / set values.
OP10 Autopilot Controller Keys
MODE
Changes the autopilot mode. When in Auto mode, pressing the MODE key:
1) when the boat type is set to Sail: changes to Wind mode.
2) when set to any other boat type: enters into NoDrift mode.
3) for all boat types: (long key press) enters into Navigation mode; which will require
confirmation via the display before it is engaged.
STBY (or OFF): Disengages the autopilot. Places the autopilot into Standby mode.
1
Left 1º: Adjust the set course or wind angle 1 degree / steer to Port in Non Follow Up
(NFU) mode. When pressed in Standby mode this will enter the autopilot into NFU
mode.
1
Right 1º: Adjust the set course or wind angle 1 degree / steer to Starboard in NFU
mode. When pressed in Standby mode this will enter the autopilot into NFU mode.
10
Left 10º: Adjust the set course or wind angle 10 degrees / steer to Port in NFU mode.
When pressed in Standby mode this will enter the autopilot into NFU mode.
10
Right 10º: Adjust the set course or wind angle 10 degree / steer to Starboard in NFU
mode. When pressed in Standby mode this will enter the autopilot into NFU mode.
AUTO
Engage the autopilot / Acknowledge tack/gybe or navigation course change.
Changing the Autopilot mode
3 SEC
Boat Type:
• Displacement
• Outboard
• Planing
Boat Type:
• Sail
Mode Symbol Function / Mode
S
Standby
A
Auto (Compass)
W
Wind
N
Navigation
ND
NoDrift
NFU
Non Follow Up (Power steer)
Tack & Gybe in Wind mode
To tack or gybe in Wind mode press both 1º course keys on the OP10 Autopilot controller.
1
1
EN
Part No.988-10364-002 - Section 1 of 5
Page navigation
Menu navigation
Back lighting
Night mode
3 SEC
Replacing a data page
Creating custom pages
Disable / Enable a data page
Start / Stop timer
Reset trip log
  • Page 1 1
  • Page 2 2

Simrad IS40 Display & OP10 Autopilot Controller Quick start guide

Type
Quick start guide
This manual is also suitable for

Simrad IS40 Display & OP10 Autopilot Controller empowers boaters with cutting-edge technology for precise navigation and effortless control. Experience intuitive sailing with features like Auto mode for automated steering, Wind mode for sailing efficiency, and Navigation mode for accurate course-keeping. Customize your display with eight default pages, including the autopilot page, to monitor essential data. Take command with the OP10 controller, featuring dedicated keys for course adjustment and easy mode switching.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI