LOKATSE AC18802G Installation guide

Brand
LOKATSE
Model
AC18802G
Type
Installation guide

This manual is also suitable for

LOKATSE AC18802G is a versatile and stylish chair that combines comfort with functionality.

LOKATSE AC18802G is a versatile and stylish chair that combines comfort with functionality.

Imported by Festival Trading Inc.
Made in China
ASSEMBLY INSTRUCTION
Please read the instruction carefully before assembly.
Part # Reference Image Description
Left Armrest
Right Armrest
Front Leg
Rear Leg
Chair back
QTY
A
1
1
2
2
1
B
C
D
E
Chair Base
Cushion
(inside of the
chair base)
Washer
Screw
(M8×45)
Screw
(M8×70)
Hex Key
Seal Cloth
Nailed under the
chair base
F
1
1
6
(2 for spare use)
4
5
(2 for spare use)
1
1
G
H
I
J
K
L
Please check and make sure you have all the parts available before you start with the assembly.
Assembly should be performed on a clean and soft surface, e.g. flat carton box can be used.
STEP 1
Take out cushion from the chair base for assembly.
STEP 2
Put left armrest on the ground, then screw left armrest to the chair base with hex key. There are 4
screws need to be screwed. Please refer to Fig.1 to use proper screws. The upper two screws are
M8*70 and the lower screws are M8*45. Please do not tighten any screw to end before you’ve con-
nected all screws.
STEP 3
Repeat step 2 to screw right armrest.
B
E
F
G
A
C
D
A
L
I
I L
L
F
Fig.1
STEP 4
Turn chair base horizontal and insert chair back. Please stand behind the chair base and gently insert
chair back into the chair base. Firmly but gently, push the chair back downwards until the back is fully
slotted and locked into position. Please make sure there is no gap between the back and chair base.
STEP 5
Lay down the chair base. Insert the screw into mounted position. Screw the chair back tightly and seal
the cloth.
STEP 6
Lay down the chair base. Put one washer on one leg, then insert threaded leg into the mounted
position. Gently screw the leg into chair base. Make sure the leg is screwed tightly. Repeat the same
process for the other 3 legs.
B I A KF
E
F
A
B
B
F
A
H
C
STEP 7
Finish and enjoy your chair!
CAUTION! THE CHAIR CAN ONLY BE USED ON A FLAT SURFACE TO AVOID ANY
ACCIDENTS.
Care and Maintenance
1.Do not place it near any fire, heater, or flame.
2.Do not clean it with any sharp cleaning tools as this may damage the fabric.
3.For indoor use only, avoid any patio purposes.
4.Place it in dry and cool place, avoid direct sunlight.
5.Clean it with mild soap and damp non-colored cloth.
6.Please do not write or draw on it, such stains may be permanent.
7.Children should not climb or jump on the chair.
8.Small parts-Choking Hazard- Not for children.
Imported by Festival Trading Inc.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

LOKATSE AC18802G Installation guide

Brand
LOKATSE
Model
AC18802G
Type
Installation guide
This manual is also suitable for

LOKATSE AC18802G is a versatile and stylish chair that combines comfort with functionality.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents