TECCPO Cordless Drill, 20V Drill Driver 2x2000mAh Batteries, 530 In-lbs Torque, 24+1 Torque Setting, Fast Charger 2.0A, 0-1700RPM Variable Speed, 33pcs Accessories, 1/2" Metal Keyless Chuck, TECCPO User guide

Model: Cordless Drill, 20V Drill Driver 2x2000mAh Batteries, 530 In-lbs Torque, 24+1 Torque Setting, Fast Charger 2.0A, 0-1700RPM Variable Speed, 33pcs Accessories, 1/2" Metal Keyless Chuck, TECCPO

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE CAUSE SOLUTION

Unit will not

start

Battery pack not installed properly Check battery pack installation

Battery pack not charged check battery pack charging requirements

internal components too hot Allow tool cool down

Battery pack

will not

charger

battery pack not inserted into charger

insert battery pack into charger until LED

illuminates

Charger not plugged in

plug charger into a working outlet.refer to

important charging Notes for more details

Surrounding air temperature too hot or tool cold

Move battery pack to a surrounding air temperature

of above 40℉（4.5℃）or below 104℉（40℃）

Unit shuts

off abruptly

Battery pack has reached its maximum thermal limit. Allow battery pack to cool down

out of charge.(To maximize the life of the battery

pack it is designed to shutoff abruptly when the

charge is depleted.

place on charger and allow to charge

Model: Cordless Drill, 20V Drill Driver 2x2000mAh Batteries, 530 In-lbs Torque, 24+1 Torque Setting, Fast Charger 2.0A, 0-1700RPM Variable Speed, 33pcs Accessories, 1/2" Metal Keyless Chuck, TECCPO