Upper Bounce UBPAD-S-15-G Operating instructions

Brand
Upper Bounce
Model
UBPAD-S-15-G
Type
Operating instructions
Extend the spring pull tool and link it up with the other end of the spring. Pull the tool
in the direction of the trampoline frame until the spring head is lined up with the hole in
the trampoline frame. Slide the spring end into the hole as you remove the tool.
Hook the more rounded end of the spring onto the trampoline mat’s triangular rings.
Take hold of the more tightly rounded spring
end, attaching it to the triangular ring on the
jumping mat.
Then attach the other end of the spring to the
hole in the trampoline frame, using the spring
pull tool. (As shown on page 5.)
Follow the instructions on the next page for
completing the springs installation process.
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Upper Bounce UBPAD-S-15-G Operating instructions

Brand
Upper Bounce
Model
UBPAD-S-15-G
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents