2. TC HELICON
  3. MIC MECHANIC 2

TC HELICON MIC MECHANIC 2 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the TC HELICON MIC MECHANIC 2 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Echo - Selects the type and amount of
echo eect on your voice.
USB – Accepts micro-USB cables for
rmware updates.
On/O
Correction - Adjusts the amount of
pitch correction.
Tone – Engages ‘Adaptive Tone’
for EQ, compression, de-essing
and gating. Hold the Tone button
while turning the Correction
knob to adjust the amount of
Echo feedback.
Footswitch - Bypasses the echo,
reverb and correction eects.
Hold the footswitch for a few
seconds to enter Tap Mode, then
press the footswitch a few times in
rhythm with your desired tempo.
Mic – Connect your microphone.
Out – Connect to a mixer or
powered speaker.
Power – Connect a 9V / >300 mA
power supply, such as the PowerPlug 9
(not included). The pedal also accepts
4 x AA batteries.
Reverb - Selects the type and amount
of reverb eect on your voice.
Visit tc-helicon.com to download the full manual
Quick Start Guide
TC-HELICON MIC MECHANIC 2
/