Danfoss DHP-R Eco Operating instructions

Danfoss
Brand
Danfoss
Model
DHP-R Eco
Type
Operating instructions
Software Upgrade installation manual
Page 1
Software
Upgrade
Installation
manual
•
Download
the latest
version of software, found
on the
website
http://hp.danfoss.net
under products.
Save this file
on your computer.
•
Download
the latest
version of Java, www.java.com
.
•
Connect
your PC to the
WM HPC by using a crossover
network
cable. Connect
the network
cable
to the port
marked
Ethernet
on the WM
HPC. If
your PC and WM HPC is
properly connected the yellow diode named ”Link”
on the
WM HPC will lit up.
Software Upgrade installation manual
Page 2
Ethernet connection
Link diode lights up yellow
Software Upgrade installation manual
Page 3
From the operator panel on
the heat
pump
•
Switch
operating mode to standby.
•
Navigate
in the menu
until
you find
System settings.
•
Under
System
Settings
you can
find
Software
Upgrade.
Activate
this function.
WM HPC is now
ready
to be updated!
But you need to change some settings in your PC.
Software Upgrade installation manual
Page 4
Network settings in your PC
•
Open the control
panel and double
click
on ”Network
Connections”
•
Changes in settings
for your normal internet
connection needs to
be done. This is most commonly your ”Local Area Connection”
•
Right click
on ”Local Area Connection”
and select
”Properties”
•
Select
TCP/IP and click
on ”Properties”
•
Choose the following
alternative:
”Use
the following
IP address”
and use
IP address
10.0.48.10 and the subnet
mask
255.255.255.0
•
Open the software update program you recently downloaded
Software Upgrade installation manual
Page 5
Control panel
Double click
on
”Network
Connections”
Software Upgrade installation manual
Page 6
Network settings
Right click
on ”Local Area
Connection”
and choose
”Properties”.
Software Upgrade installation manual
Page 7
Local area connection
•Select
”Internet
Protocol
(TCP/IP)”
•Click
on Properties
Software Upgrade installation manual
Page 8
Properties
•Select
the alternative
”Use
the
following
IP address”
•Use
IP address: 10.0.48.10
•Use
Subnet
mask: 255.255.255.0
Your
PC is now ready!
Software Upgrade installation manual
Page 9
Software Upgrade
•User: config
•Password: ef56
•Click
on Start Upgrade
•Installation
process will
start
Software Upgrade installation manual
Page 10
Done!
When the installation
process has completed the
field
to the right will
turn
green, and the WM HPC will
restart
once more. Wait until
the upgrade is ready.
The
upgrade
can
take
about
15
minutes. If
something
should
go
wrong
the field
will
turn
red.
After the software upgrade,
switch
the heat pump back
to operating
mode to
AUTO,
and reset
your
network
settings on your PC back to
normal.
Software Upgrade installation manual
Page 11
Select
the alternative
”Obtain
an IP Address
automatically”
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Danfoss DHP-R Eco Operating instructions

Danfoss
Brand
Danfoss
Model
DHP-R Eco
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents