Please
note: specifications are subject to change for improvement without notice. (English)
© May 2018 by Shimano Inc. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
SI-0159A-005-00
Technical Service Instructions
QUICK-LINK
(11/12 speed)
Technical Service Instructions in further languages are available at :
http://si.shimano.com
Important Safety Information
For replacement information, contact the place of purchase or a bicycle dealer.
WARNING
Do not reuse a QUICK-LINK that has been removed. If the QUICK-LINK is reused,
there is a risk that it will loosen and become detached, which may result in an
accident.
“Maintenance interval depends on the usage and riding circumstances. Clean the
chain and QUICK-LINK regularly with an appropriate chain cleaner. Never use
alkali based or acid based solvents such as rust cleaners. If any of these are used,
the chain or QUICK-LINK might break resulting in serious injury.”
•
Check the chain and QUICK-LINK for any damage (deformations or cracks), chain skipping,
or other abnormalities such as unintended gear shifting. If any problems are found, consult
a dealer or an agency. There is a risk of the chain breaking or the QUICK-LINK disengaging,
which may cause the bicycle to collapse.
•
When replacing the chain with a new one, be sure to also replace the QUICK-LINK with a
new one. If you do not replace it, the QUICK-LINK may break and you may fall.
•
When attaching the QUICK-LINK, make sure that the pins on the link plates are pushed all
the way in and securely planted in the link holes.
•
Read these Technical Service Instructions carefully, and keep them in a safe place for later
reference.
Note
•
You should periodically wash the chainrings/sprockets in a neutral detergent and then
lubricate them again. In addition, cleaning the chain and QUICK-LINK with a neutral
detergent and lubricating it can be an effective way of extending its useful life.
•
Shimano original tool is required to remove the QUICK-LINK. Consult a dealer or an agency.
•
When using a QUICK-LINK, be sure to install it so that the arrow on the surface faces in the
direction of rotation of the crank when viewed from the front.
•
Each QUICK-LINK is compatible with the chains specifi ed in the table below.
QUICK-LINK Chain
SM-CN-910 CN-M9100
SM-CN-900
CN-9000/CN-6800/CN-HG901-11
CN-HG900-11/CN-HG701-11/CN-HG700-11
CN-HG601-11/CN-HG600-11/CN-E8000-11
•
Products are not guaranteed against natural wear and deterioration from normal use and
aging.
•
For maximum performance we highly recommend Shimano lubricants and maintenance
products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found with the
following items, contact the place of purchase or a bicycle dealer.
•
Is the chain or QUICK-LINK deformed or cracked?
•
Does any chain skipping or unintended gear shifting occur?
•
Is the arrow facing in the direction of rotation of the crank when viewed from the
front?
Names of parts
Crank
Crank
Arrow
QUICK-LINK
Installing a QUICK-LINK
1.
Insert the pins of the QUICK-LINK into the spaces in the inner link from both sides as
shown in the illustration.
Rotation of
the crank
Crank
Arrow
QUICK-LINK
2.
Use Shimano original tool TL-CN10 to slide the pins and insert them fi rmly.
Check that both QUICK-LINK plates are fi rmly fastened in position as shown in the
illustration.
Removing a QUICK-LINK
Set Shimano original tool TL-CN10 as shown in the illustration, slide the pins and remove the
QUICK-LINK.
R
E
M
O
V
E
C
O
N
N
E
C
T
-
1
Shimano SM-CN900-11 Service Instructions
- Type
- Service Instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Shimano TL-RD11 Service Instructions
-
Shimano CN-LG500 (E-BIKE) Service Instructions
-
Shimano SW-R600 User manual
-
Shimano FD-M676 Dealer's Manual
-
Shimano CN-HG600-11 User manual
-
Shimano SW-R9150 User manual
-
-
-
Shimano ST-M970 Service Instructions
-
Shimano FC-M810 Service Instructions