STANDARD FEATURES
OPTIONS & ACCESSORIES
CERTIFICATIONS
SPECIFICATIONS
Extra heavy duty radiant char broilers are designed for high volume
broiling without charcoal or ceramic stones.
The CH Series features unitized construction. The entire chassis
frame including the base is hand-crafted of 1/2" (13mm) to 1/4"
(6mm) thick HRS and welded to form a single unit without
fasteners. The sides and rear of the outer shell is made of heavy
gauge CRS and is welded to the chassis frame to complete the
unitized construction and finished with durable Baker Tone paint.
CH Series features 24" long (610mm) aluminized steel burners
rated at 18,000 BTUH each (5.27kw) located every 5 1/4"
(133mm). Each burner features a separate, independent operator-
controlled valve. Cast iron heat deflector radiants are located
directly above each burner for an even transfer of radiant heat to
the broiling surface. Cast iron burners are optional.
Standard grates are rear-hinged, hevy-duty steel rods. Broiler
grates are 24" deep (610mm) for maximum production.
Exterior measures 28 1/4" deep (718mm) plus 8" lintel plate
(203mm) or 9 1/8" (232mm) work deck with plate shelf. Working
height measures 33 1/2" (851mm) with legs, or 20" (508mm)
without legs, plus 6 1/2" (165mm) back splash. Standard widths
range from 33 1/2" (851mm) up to 75 3/4" (1924mm).
Standard features include 3 1/4" deep stainless steel slide-out
water pans and grease drawer, rear gas connections and pressure
regulator.
One year limited parts and labor warranty.
q
q
q
q
q
q
q
q
q
q
q
q
q
q
Heavy plate steel, welded unitized construction
High performance 18,000 BTUH per burner
Individual, operator-controlled, adjustable burner valves
Stainless steel back splash
Stainless steel splash guards
Pressure regulator
Legs with heavy duty casters
Stainless steel heat shield
One year limited parts and labor warranty
Natural or LP gas
Cast iron radiant heat deflectors above each burner
3 1/4" Deep stainless steel water pans
3 1/4" Deep stainless steel grease drawer
Stainless steel side panels
q
q
q
q
q
q
q
Stainless steel radiants at no extra charge
Cast iron burners
Side gas connections
Char broiler and grilling accessories
Removable griddle plates
Log holders for wood-assisted char broiling
Gas connector hoses
BAKERS
PRIDE
q Model CH-6J
q Model CH-10J
q Model CH-8J
q Model CH-12J
HIGH PERFORMANCE
HEAVY DUTY
FLOOR MODEL
RADIANT
CHAR BROILERS
BAKERS
PRIDE
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 • 1-800-431-2745 • fax 914/576-0605
GAS CHAR BROILERS
G
Model CH-6J
with standard heat shield
D
E
S
I
G
N
C
E
R
T
I
F
I
E
D
CERTIFIED
BAKERS
PRIDE
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
DANTE-CHJ — TSW:05/08
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 • 1-800-431-2745 • fax 914/576-0605
SHIPPING INFORMATION
SPECIFICATIONS
GAS SUPPLY
Model
Model
Model
CH-6J
CH-8J
CH-10J
CH-12J
CH-6J
CH-8J
CH-10J
CH-12J
CH-6J
CH-8J
CH-10J
CH-12J
570
660
960
1250
44.4
43.2
65.2
78.7
32 1/2x24
43x24
53 3/4x24
64 1/2x24
108,000
144,000
180,000
216,000
52 1/2
45
60
71 1/2
39 1/2
44 1/2
47 1/2
47 1/2
37
42
40
40
259
300
436
568
1.26
1.23
1.84
2.23
826x610
1092x610
1365x610
1638x610
6
8
10
12
6
8
10
12
31.64
42.19
52.74
63.28
3/4”
3/4”
1”
1”
1334
1143
1524
1816
1003
1130
1207
1207
940
1041
1016
1016
Shipping Weight Crate Size
Broiling Area # Top
Grates
#of
Burners
Carton Dimensions
Overall Dimensions*
Lbs.
Cubic
Feet
in.
BTUH
Inches
Width Depth Height
Inches Inches
Kilos
Cubic
Meter
mm
KW CONNECTION
mm mm mm
Inches
Width Depth Height
Inches Inchesmm mm mm
MINIMUM CLEARANCES
Right
Left
Rear
0
0
0
0
0
0
• From non-combustable construction
• Install only with non-combustable material above grate level
certification not available in LP gasCE
Inches mm
36 1/4
36 1/4
36 1/4
36 1/4
40
40
40
40
36 1/2
47 1/2
57 3/4
68 1/4
1016
1016
1016
1016
921
921
921
921
927
1197
1467
1734
*Height includes legs and back splash
SIDE VIEW
with Optional Splash Guard
TOP VIEW
ALL DIMENSIONS NOMINAL
Gas Connection
3/4 NPT
3/4 NPT Gas Connection
"B" BROILING AREA
"B"
"W"
[37mm]
1 7/16
2 3/4
[70mm]
[921mm]
36 1/4
7 5/16
[186mm]
20"
[508mm]
4 1/8
[105mm]
8"
[203mm]
SIDE VIEW
with Optional Legs & Splash Guard
20 13/16
[529mm]
12"
[305mm]
21 1/2
[546mm]
[718mm]
28 1/4
[160mm]
6 5/16
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Bakers Pride CH-10 Datasheet
-
Bakers Pride CHE-12 Datasheet
-
Bakers Pride Dante XX-4 User manual
-
Bakers Pride Oven XX-4BG User manual
-
Bakers Pride XX-4BG Specification
-
Bakers Pride HDCRB-2460 Datasheet
-
Bakers Pride XXE-4 Specification
-
Bakers Pride SGBR-2 Specification
-
Bakers Pride C-30GS User manual
-
Bakers Pride L-72R User manual
