Zanussi ZR170UF is a quality refrigerator designed to make food storage easier and more efficient. It features adjustable shelves, a spacious interior, and a reversible door for convenient use. The refrigerator compartment is perfect for keeping fresh food items organized, while the freezer compartment provides ample space for frozen goods. Additionally, the ice-cube production capability ensures a ready supply of ice for drinks and other uses. The Zanussi ZR170UF is a reliable and practical choice for your refrigeration needs.
Zanussi ZR170UF is a quality refrigerator designed to make food storage easier and more efficient. It features adjustable shelves, a spacious interior, and a reversible door for convenient use. The refrigerator compartment is perfect for keeping fresh food items organized, while the freezer compartment provides ample space for frozen goods. Additionally, the ice-cube production capability ensures a ready supply of ice for drinks and other uses. The Zanussi ZR170UF is a reliable and practical choice for your refrigeration needs.
FRIGORIFERO
REFRIGERATOR
KÜHLSCHRANK
ZR 170 UF
LIBRETTO ISTRUZIONI INSTRUCTION BOOKLET GEBRAUCHSANWEISUNG
2222 260-04
This document was created with FrameMaker 4.0.4
9
CONTENTS
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 10
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Cleaning the interior . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 12
Door reversibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 12
Fitting a decorative door panel . . . . . . . . . . . . . . . . . . . . . . . .page 12
Changing the opening direction of the door . . . . . . . . . . . . . . . . . . . .page 14
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Temperature regulation . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Fresh food refrigeration. . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Movable shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Storage of frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Thawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16
Ice-cube production . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 17
Periodic cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 17
Periods of non-operation. . . . . . . . . . . . . . . . . . . . . . . . . . .page 17
Interior light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 17
Customer Service and spare parts . . . . . . . . . . . . . . . . . . . . . . . . .page 17
10
WARNINGS
It is most important that this instruction book should be
retained with the appliance for future reference. Should
the appliance be sold or transferred to another owner, or
should you move house and leave the appliance, always
ensure that the book is supplied with the appliance in
order that the new owner can be acquainted with the
functioning of the appliance and the relevant warnings.
These warnings are provided in the interest of safety. You
must read them carefully before installing or using the
appliance.
ª This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the appliance.
ª Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
ª This appliance should be serviced by an
authorized Service Centre, and only genuine
spare parts should be used.
ª It is dangerous to alter the specifications or
modify this appliance in any way.
ª Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
ª The domestic refrigerators and freezers are
designed to be used specifically for the storage of
edible foodstuffs only.
ª Frozen food must not be re-frozen once it has
been thawed out.
ª Manufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.
ª There are working parts in this appliance which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
ª Parts which heat up should not be exposed.
Wherever possible the back of the appliance
should be against a wall.
ª Before any cleaning or maintenance work is
carried out, be sure to switch off and unplug the
appliance.
ª If the appliance is transported horizontally, it is
possible that the oil contained in the compressor
flows in the refrigerant circuit. It is advisable to
wait at least two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
ª The inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage the
appliance beyond repair and cause food loss. DO
NOT USE SHARP INSTRUMENTS to scrape
off frost or ice. Frost may be removed by using
the scraper provided. Under no circumstances
should solid ice be forced off the liner. Solid ice
should be allowed to thaw when defrosting the
appliance. See defrost instructions.
ª Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance.
ª This appliance is heavy. Care should be taken
when moving it.
ª Ice lollies can cause frost burns if consumed
straight from the appliance.
ª Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunctioning. Refer to your local
Service Centre, and always insist on genuine
spare parts.
ª This appliance does not contain gasses which could
damage the ozone layer, in either its refrigerant circuit
or insulation materials; it must nevertheless be disposed
off in a proper manner, in accordance with regulations
for protection of the environment.
11
INSTALLATION
If this appliance featuring magnetic door seals is to
replace an older appliance having a spring lock (latch) on
the door or lid, be sure to make that spring lock
unusable before you discard the old appliance.
This will prevent it from becoming a death-trap for a
child.
Positioning
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
Best performance is obtained with ambient
temperature between +16°C and +32°C (class N) or
between +10°C and +32°C (class SN).
The class of your appliance is shown on its rating
plate.
For building into kitchen units follow the special
“Building-in” instructions given.
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably
sized auto-transformer must be used.
The appliance must be earthed.
The power supply cable plug is provided with a
contact for this purpose.
If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in
compliance with current regulations, consulting a
specialist technician.
The Manufacturer declines all responsibility if the above
safety precautions are not observed.
This appliance complies with EEC directive number 87/308
of 2/6/87 relative to radio interference suppression.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abrasive powders, as these
will damage the finish.
12
Location
Fig. 1
This appliance is
designed to be
built-in to a space
having the
dimensions given
in Fig. 1.
Fig. 2
The height of the
appliance can be
altered if required
by means of
adjustable feet
situated at its
base (Fig. 2).
Door reversibility
Remove the two screws which fix the upper hinge to
the door.
Fig. 3
Carefully lean
the appliance on
its back and
remove the plastic
insert (Fig. 3).
Remove the two screws which fix the lower hinge to
the door.
Remove the four screws which fix the lower hinge
to the base of the appliance and remove the hinge
itself; be very careful to recover all the screws.
Remove the four screws that fix the upper hinge to
the appliance and remove the hinge itself.
100-170
596
820-870
547
550
600
820
870
D506
D507
D447
Fig. 4
Take the hinge
removed from
the upper part of
the appliance on
the opposite side
(see Fig. 4), and,
using the screws
removed from the
lower part, fix it to
the base of the
appliance itself.
Remove and refit the other hinge on the upper part
of the appliance on the opposite side.
Fix the two front screws into the upper and lower
hinges (Fig. 4).
Finally, check the alignment of the door and make
sure it closes properly.
After having reversed the opening direction of the
door, discard the original plastic insert removed and
fit the insert supplied with the appliance on the
opposite side.
Fitting a decorative door panel
Important: The components needed to fit the decorative
panel have been pre-fitted on the appliance.
The brackets are secured to the panel by means of the 7
Ø 3.5x13 screws supplied.
Before starting to fit the panel, remove the large top
bracket by unscrewing the screws and adjusting pins pre-
fitted on the appliance door. The small bottom bracket
need not be removed.
Fig. 5
Place the
appliance in the
position where it
is to be built in
(Fig. 5).
The appliance is
fitted with
adjustable feet;
screw the front
and rear feet in
or out to adjust the height of the appliance to that of
the recess.
Keeping the appliance central in the recess, slide it
in until its back touches the wall.
With a tape measure (or similar instrument),
measure distance (A) between the top edge of the
door and the top edge of the decorative panel,
placing it next to the recess.
D510
D467
= =
A
13
Fig. 6
Lay the panel face
down (Fig. 6).
Position the top
bracket on the
panel, making
sure that there is
an equal distance
between it and
the sides and that
its distance from
the top edge is equal to distance (A) less 1 cm.
Secure the bracket with the screws supplied.
Take care not to damage the front face of the panel
whilst working.
Fig. 7
Insert the
adjusting pins (B-
Fig. 7) into their
locations in the
door and screw
them in.
Fig. 8
Hook the
decorative panel
onto the top part of
the door, inserting
the pins (B) (on the
door) into the
elongated holes (1)
(in the top bracket
fitted to the panel)
(Fig. 8).
Insert the securing screws (C) through elongated
holes (2) and fix the panel without tightening the
screws (Fig. 8).
Fig. 9
Once the top of
the panel has
been correctly
positioned, fix it
through the holes
in the bottom
bracket, without
tightening the
screws (Fig. 9).
D468
A
-1cm
=
=
D532
B
D533
1
B
2
C
D471
Fig. 10
Check the
position again by
slackening the
screws and pins
then, once the
best position has
been obtained,
fully tighten all
the fixings.
Cover the visible
part of the top bracket on the panel with plastic
cover (D), inserting it in the locations provided in
the bracket.
Fig. 11
Once the door has
been correctly
aligned, tighten
the holding nuts
on the fixing
brackets and
attach the
appliance to the
adjacent units and
the bottom of the
work surface
(Fig. 11).
Fig. 12
If the appliance
has been fitted into
a space 820 mm
high and the
maximum height
of the base plate is
100 mm, fit the
front cover plate
by pushing the two
vertical lugs into
the rectangular holes on the bottom side of the
ventilation duct until they click. The plate can be
adjusted backwards or forwards in the holes
(Fig. 12).
D472
D
D517
135
185
170
220
600
820
870
D518
14
Fig. 13
If the base plate is
between 100 and
135 mm high, cut
it as shown in
Fig. 14 and
mount as
described above.
If the base plate is
between 135 and
170 mm high, cut
it as shown in
Fig. 12.
Fig. 14
If the appliance
has been fitted into
a space 870 mm
high and the
maximum height
of the base plate is
150 mm, fit the
front cover plate as
described in
Fig. 13.
If the base plate is between 150 and 185 mm high,
cut it as shown in Fig. 14.
If the base plate is between 185 and 220 mm high,
cut it as shown in Fig. 12.
100
150
820
870
20÷80
D519
100÷135
150÷185
820
870
D520
15
USE
Operation
Insert the plug into the wall socket.
Open the refrigerator door and turn the thermostat
knob, clockwise, beyond the «O» (STOP) position.
The appliance will start to operate.
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob toward
lower settings or reduced (colder) rotating the knob
towards higher settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
room temperature;
how often the door is opened;
the quantity of food stored;
location of appliance.
A medium setting is generally the most suitable.
To stop operation, simply turn the thermostat knob
to position «O».
Important
If the ambient temperature is high or the appliance is
fully loaded, and the appliance is set to the lowest
temperatures, it may run continuously causing frost to
form on the rear wall. In this case the dial must be set
to a higher temperature to allow automatic defrosting
and therefore reduced energy consumption.
Fresh food refrigeration
To obtain the best performance:
do not store warm food or evaporating liquids in the
refrigerator;
do cover or wrap the food, particularly if it has a
strong flavour.
Position food so that air can circulate freely round it.
Useful hints:
Meat (all types): wrap in polythene bags and place on
the glass shelf above the vegetable drawer(s).
For safety, store in this way only one or two days at the
most.
Cooked foods, cold dishes, etc..: these should be
covered and may be placed on any shelf.
Fruit and vegetables: these should be thoroughly
cleaned and placed in the special drawer(s)
provided.
Butter and cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not packed, must
not be kept in the refrigerator.
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
Fig. 15
Ice-cube production
This appliance is equipped with one or more trays
for the production of ice-cubes.
Fill these trays with water, then put them in the
freezer compartment.
Do not use metallic instruments to remove the trays
from the freezer.
D040
16
Defrosting
Frost is automatically eliminated from the
evaporator of the refrigerator compartment every
time the motor compressor stops, during normal
use.
The defrost water drains out through a trough into
a special container at the back of the appliance, over
the motor compressor, where it evaporates.
It is important to periodically clean the defrost water
drain hole in the middle of the refrigerator compartment
channel to prevent the water overflowing and dripping
onto the food inside.
Use the special cleaner provided, which you will find
already inserted into the drain hole.
Fig. 16
D037
17
MAINTENANCE
Unplug the appliance before carrying out any
maintenance operation.
Periodic cleaning
Clean the inside with warm water and bicarbonate
of soda.
Rinse and dry thoroughly.
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to
prevent unpleasant smells.
Interior light
The light inside the refrigerator compartment is
easy to get at through the opening in the light
holder.
If the light does not come on when the door is open,
check that it is screwed into place properly.
If it still does not light up, change the bulb.
The rating is shown on the light bulb cover.
Fig. 17
D 400
CUSTOMER SERVICE AND SPARE PARTS
If the appliance is not functioning properly, check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is an electricity supply (find out by plugging in
another appliance);
the thermostat knob is in the correct position.
If there are water drops on the bottom of the
cabinet, check that the defrost water drain opening
is not obstructed (see “Defrosting” section).
If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model and serial number of your
appliance which can be found on the guarantee
certificate or on the rating plate located inside the
appliance, on the bottom left-hand side.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Zanussi ZR170UF is a quality refrigerator designed to make food storage easier and more efficient. It features adjustable shelves, a spacious interior, and a reversible door for convenient use. The refrigerator compartment is perfect for keeping fresh food items organized, while the freezer compartment provides ample space for frozen goods. Additionally, the ice-cube production capability ensures a ready supply of ice for drinks and other uses. The Zanussi ZR170UF is a reliable and practical choice for your refrigeration needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Zanussi ZR170UN User manual
-
-
-
-
-
-
-
-
-
