AEG L89409FL User manual

Category
Washing machines
Type
User manual
EN User Manual
Washing Machine
L 89409 FL
CONTENTS
1. SAFETY INFORMATION.............................................................................................2
2. CONDITIONS OF USE................................................................................................4
3. SAFETY INSTRUCTIONS.............................................................................................4
4. PRODUCT DESCRIPTION...........................................................................................6
5. CONTROL PANEL....................................................................................................... 7
6. PROGRAMMES .........................................................................................................10
7. OPTIONS....................................................................................................................14
8. SETTINGS...................................................................................................................14
9. BEFORE FIRST USE................................................................................................... 15
10. DAILY USE................................................................................................................15
11. HINTS AND TIPS..................................................................................................... 19
12. CARE AND CLEANING.......................................................................................... 20
13. TROUBLESHOOTING.............................................................................................24
14. TECHNICAL DATA..................................................................................................27
15. WARRANTY .............................................................................................................27
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
www.aeg.com
2
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Do not let children play with the appliance.
Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
If the appliance has a child safety device, this should
be activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2
General Safety
Do not change the specification of this appliance.
Obey the maximum load volume of 10 kg (refer to the
“Programme chart” chapter).
The operating water pressure (minimum and
maximum) must be between 0,5 bar (0,05 MPa) and 8
bar (0,8 MPa).
The ventilation opening in the base (if applicable)
must not be covered by a carpet, mat, or any floor
covering.
The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
ENGLISH
3
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
2. CONDITIONS OF USE
This appliance is intended to be used in
household and similar applications such
as:
Farm houses
By clients in serviced apartments,
holiday apartments and other
residential type environments.
3. SAFETY INSTRUCTIONS
3.1 Installation
Remove all the packaging and the
transit bolts.
Keep the transit bolts in a safe place.
If the appliance is to be moved in
future they must be reattached to lock
the drum to prevent internal damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not install or use a damaged
appliance.
Follow the installation instruction
supplied with the appliance.
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
The floor area where the appliance is
to be installed must be flat, stable,
heat resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
Do not install the appliance directly
over the floor drain.
Adjust the feet to have the necessary
space between the appliance and the
flooring.
Do not install the appliance where the
appliance door cannot be fully
opened.
Do not put a container to collect
possible water leakage under the
appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
3.2 Electrical connection
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
www.aeg.com
4
to be replaced, this must be carried
out by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not touch the mains cable or the
mains plug with wet hands.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
3.3 Water connection
Do not cause damage to the water
hoses.
Before connection to new pipes,
pipes not used for a long time, where
repair work has been carried out or
new devices fitted (water meters,
etc.), let the water flow until it is clean
and clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
Do not use an extension hose if the
inlet hose is too short. Contact the
service centre for the replacement of
the inlet hose.
You can extend the drain hose to
maximum 400 cm. Contact the service
centre for the other drain hose and
the extension.
3.4 Use
WARNING!
Risk of injury, electrical
shock, fire, burns or damage
to the appliance.
This appliance is for household use
only.
Follow the safety instructions on the
detergent packaging.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Make sure that all metal objects are
removed from the laundry.
Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.
Do not touch the glass door while a
programme is in operation. The glass
can get hot.
3.5 Service
To repair the appliance contact an
Authorised Service Centre.
Use original spare parts only.
3.6 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
ENGLISH
5
4. PRODUCT DESCRIPTION
4.1 Appliance overview
1
2
3
8
9
5
6
7
4
10
11
12
1
Worktop
2
Detergent dispenser
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump
7
Levelling feet
8
Water drain hose
9
Water inlet valve
10
Mains cable
11
Transit bolts
12
Levelling feet
4.2 How to activate the child
safety device
This device prevents children or pets
from being closed in the drum.
Turn the device clockwise, until the
groove is horizontal.
You cannot close the door.
To close the door, turn the device
anticlockwise until the groove is vertical.
4.3 Fixing plate kit
(4055171146)
Available from your authorised dealer.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Read carefully the instructions supplied
with the accessory.
www.aeg.com6
5. CONTROL PANEL
5.1 Control panel description
Temp.
Spin
Start/Pause
Delay
Start
Time
Save
Extra
Rinse
Stains/
Prewash
Cottons
Extra Silent
Synthetics
Easy Iron
Delicates
Duvet
Anti-Allergy
Spin/Drain
Rinse
20 Min. - 3 kg
Refresh
Anticrease
Auto Off
Economy
1 2 3
45678910
1
On/Off button (Auto Off)
2
Programme knob
3
Display
4
Start/Pause button (Start/Pause)
5
Delay Start button (Delay Start )
6
Time Save button (Time Save)
7
Extra Rinse button (Extra Rinse)
8
Stains/Prewash button (Stains/
Prewash)
9
Spin reduction button (Spin)
10
Temperature button (Temp.)
5.2 Display
A H
K J
C D E F GB
M L
I
The display shows:
A
Temperature of the set programme
Cold water
ENGLISH 7
B
Spin speed of the set programme
No Spin symbol
1)
Rinse hold symbol
1)
Only available for SPIN/DRAIN programme.
C
The phase symbols
When a programme is set, all the symbols of the phases related to the programme
come on.
When the programme starts, only the symbol of the phase in operation flashes.
When the programme is completed, the symbol of the last phase is on.
Prewash phase
Washing phase
Rinse phase
Spin phase
D
The steam symbol comes on when you set a Steam programme.
E
The detergent overdosing symbol comes on at the end of the cycle
when the appliance detects too much detergent.
F
You cannot open the appliance door when the symbol is on. You can
open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
The «Rinse hold» function is on.
There is water in the drum.
G
The delay start symbol comes on when you set the delay start func-
tion.
H
The child safety lock symbol comes on when this device is activated.
www.aeg.com8
I
Programme time
When the programme starts, the programme time decreases with
steps of 1 minute.
Delay start
When you press the delay start button, the display shows the delay
start time
Alarm codes
If the appliance has a malfunction, the display shows alarm codes.
Refer to «Troubleshooting».
The display shows this message for some seconds when:
you cannot set a function with the washing programme
you try to change the washing programme while it operates.
When the programme is completed.
J
When the door is open - Refer to 'Loading the laundry' paragraph
Maximum programme load.
The symbols shows the maximum load for the set pro-
gramme.
Weight of laundry.
The symbol shows the weight of the laundry inside the
drum. When you load the laundry, the weight updates by
steps of 0.5 kg.
When the door is closed
Symbol of detergent
Percentage of the detergent quantity.
The symbols shows the quantity of detergent to use for
the laundry in the drum.
When you press the Start/Pause button, these symbols
go off.
Graphic bars
The empty indicator bar appears only if the related function is avail-
able for the set programme.
The indicator bar fills accordingly to the set functions.
If you make a wrong selection the message Err indicates that the selec-
tion is not possible.
ENGLISH 9
K
The time save symbol comes on when you set one of the programme
duration.
Shortened time
Extra Quick
L
The extra rinse symbol comes on when this function is activated.
The value shows the total number of the rinses.
The indicator bar is fully filled when you set the maximum number of
rinses.
M
the Stain symbol comes on when you activate the function.
The Prewash symbol comes on when this function is activated.
The indicator bar is not fully filled when you set only one of the func-
tions.
The indicator bar is fully filled when you set the two functions.
6. PROGRAMMES
6.1 Programme Chart
Programme
Temperature range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Washing programmes
Cottons
95°C - Cold
10 kg
1400 rpm
White cotton and coloured cotton. Normal soil
and light soil.
Extra Silent
95°C - Cold
10 kg White and coloured cotton. Normal soil and light
soil. The programme eliminates all spinning phase
to perform a silent cycle. The cycle stops with water
in the tub.
Synthetics
60° C- Cold
4 kg
1200 rpm
Synthetic items or mixed fabric items. Normal
soil.
Easy Iron
60° C - Cold
4 kg
800 rpm
Synthetic items to be gentle washed. Normal and
light soil.
1)
www.aeg.com10
Programme
Temperature range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Delicates
40° C - Cold
4 kg
1200 rpm
Delicate fabrics as acrylics, viscose, polyester
items. Normal soil.
Wool/Silk
40° C - Cold
2 kg
1200 rpm
Machine washable wool, hand washable wool
and delicate fabrics with «hand washing» care
symbol.
2)
Duvet
60°C - 30° C
4 kg
800 rpm
Special programme for one synthetic blanket, du-
vet, bedspread and so on.
Anti-Allergy
60° C
10 kg
1400 rpm
White cotton items. This programme removes mi-
cro-organisms thanks to the washing by 60°C and
adds one rinse. In this way the wash is more effec-
tive.
Spin/Drain 10 kg
1400 rpm
To spin the laundry and to drain the water in the
drum. All fabrics.
Rinse
Cold
10 kg
1400 rpm
To rinse and spin the laundry. All fabrics, except
woollens and very delicate fabrics. Reduce the spin
speed accordingly to the type of laundry.
Outdoor
40° - Cold
2.5 kg
800 rpm
Waterproof, sports and outdoor items.. Do not
use any fabric softener!
20 Min. - 3 Kg
40°C - 30°C
3 kg
1200 rpm
Cottons and synthetics items with light soil level
or worn only once.
Super Eco 30°
30°C - Cold
3 kg
1200 rpm
Cottons, synthetics and mixed fabrics. Normal
soil
3)
.
Economy
4)
60°C - 40° C
10 kg
1400 rpm
White cotton and colour-fast cotton. Normal soil.
The energy consumption decreases and the time of
the washing programme is extended.
Steam programmes
5)
Steam can be used for dried, washed or worn once laundry. These programmes can
reduce creases and odours and make your laundry more soft.
Do not use any detergent. If necessary, remove stains by washing or using localized
stain removal.
Steam programmes do not perform any hygienic cycle.
Do not set a Steam programme with these types of items:
items where it is not specified on the care label as being suitable for tumble drying.
all items with plastic, metal, wooden parts or alike.
ENGLISH 11
Programme
Temperature range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Refresh
40° C
1.5 kg Steam programme for cotton and synthetic items.
This cycle removes odours from the laundry.
6)
Anticrease
40° C
1.5 kg Steam programme for synthetic items. This cycle
helps to dewrinkle the laundry.
1)
To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft
wash and spin phase. The appliance adds some rinses.
2)
During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum
doesn't rotate or doesn't rotate properly. Consider this as a normal functioning of the appliance.
3)
Set this programme to decrease the energy and water consumption maintaining a good washing per-
formance.
4)
The programme Economy at 60ºC is recommended for a full load of cotton and is the water and ener-
gy rating label programme in accordance with AS/NZS2040 and AS/NZS6400.
5)
If you set a Steam programme with dried laundry, at the end of the cycle the laundry could be humid.
It is better to expose the items to the fresh air for about 10 minutes to let the humidity dry. When the
programme is completed, quickly remove the laundry from the drum. After a steam cycle, items may to
be ironed anyway, but with less effort!
6)
Steam does not remove animal odours.
Programme options compatibility
Programme
Spin
Stains/Prewash
1)
Extra Rinse
2)
Time Save
3)
Delay Start
Cottons
Extra Silent
Synthetics
Easy Iron
4)
Delicates
Wool/Silk
Duvet
www.aeg.com12
Programme
Spin
Stains/Prewash
1)
Extra Rinse
2)
Time Save
3)
Delay Start
Anti-Allergy
Spin/Drain
5)
Rinse
Outdoor
20 Min. - 3 Kg
Super Eco 30°
Economy
6)
1)
If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a
temperature lower than 40°C.
2)
With a low spin speed the appliance performs delicate rinses and a short spin.
3)
If you set a shorter duration, we recommend that you decrease the quantity of the load. It is possible
to load fully the appliance, however the washing results are reduced.
4)
Only the Prewash function is available.
5)
Set the spin speed. Make sure it agrees with the laundry. If you set No Spin option the only drain
phase is available.
6)
With these programmes you can set only the shorter duration.
6.2 Woolmark Apparel Care -
Green
The wool wash cycle of this machine has
been approved by The Woolmark
Company for the washing of wool
garments labelled as «hand wash»
provided that the garments are washed
according to the instructions issued by
the manufacturer of this washing
machine. Follow the garment care label
for drying and other laundry instructions.
M1361
In UK, Eire, Hong Kong and India the
Woolmark symbol is a certification
trademark.
ENGLISH 13
7. OPTIONS
7.1 Start/Pause
Press button Start/Pause to start or
interrupt a programme.
7.2 Delay Start
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
7.3 Time Save
With this option you can decrease the
programme duration.
Press this button one time to set
'Shortened duration' for items with
daily soil.
Press this button two times to set
'Extra Quick' for items with almost no
soil.
Some programmes accept
only one of the two options.
7.4 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
7.5 Stains/Prewash
Press this button to add the stain and/or
a prewash phase to a programme.
Press the button again and again to
activate one or two options. The related
symbol and the indicator bar comes on
in the display.
Stains: Use this option for laundry
with hard stains to remove.
When you set this option, put the
stain remover into compartment
.
This function increases the
programme duration.
This option is not
available with a
temperature lower than
40° C.
Prewash: Use this option to add a
prewash phase before the washing
phase.
We recommend that you use this
option when you have laundry with a
high level of soil.
The set of this option
increases the programme
duration.
7.6 Spin
Press this button to:
Decrease the maximum speed of the
spin phase of the programme.
The display shows only
the spin speeds available
with the set programme.
Deactivate the spin phase.
Activate the Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
7.7 Temp.
Press this button to change the default
temperature. When the display shows
and , the appliance does not heat
the water.
8.
SETTINGS
8.1 Acoustic signals
The acoustic signals operate when:
You activate the appliance.
You deactivate the appliance.
You press the buttons.
The programme is completed.
The appliance has a malfunction.
www.aeg.com14
To deactivate/activate the acoustic
signals, press Stains/Prewash and Extra
Rinse at the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
To activate/deactivate this option,
press Temp. and Spin at the same
time until the indicator
comes on/
goes off.
You can activate this option:
After you press Start/Pause : the
options and the programme knob are
locked.
Before you press Start/Pause : the
appliance cannot start.
8.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
To activate/deactivate this option
press Time Save and Delay Start at
the same time until the relevant
indicator comes on/goes off.
8.4 Weight sensor activating
or deactivating
To activate or deactivate the weight
sensors, press Temp. and Stains/Prewash
at the same time for some seconds.
9. BEFORE FIRST USE
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in
the compartment for washing phase.
5. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme BEFORE
you put the laundry in the
drum.
10.2 Before activating the
appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
10.3 Activating the appliance
and setting a programme
1. Press button Auto Off to activate the
appliance.
2. Turn the programme knob to the
necessary programme.
The programme indicator comes on.
The indicator of Start/Pause button
flashes with red colour.
The display shows the default
temperature and spin and the empty
indicator bars of the available functions.
3. If it is necessary, press Temp. button
and Spin button to change the water
temperature and the spin speed.
ENGLISH
15
4. If necessary, press the related
buttons to add some functions or to
set a delayed start.
The display shows the symbol of the set
function and the digit shows the delayed
time.
10.4 Loading the laundry
1. Open the appliance door.
The display shows the maximum load for
the programme and the weight of the
laundry
.
2. Put the laundry in the drum, one item
at time. Shake the items before you
put them in the drum.
On the display the weight of the laundry
updates by steps of kg 0.5. The weight is
indicative and changes with the type of
the laundry.
If you put in the drum more
laundry than the maximum
load, the symbol and
the value start to flash.
You can wash your laundry
but the water and energy
consumption increase.
To have the best
consumption and washing
performance remove some
items until the symbols stop
to flash.
The overload indication is
available only for
programmes with a
maximum load lower than
the appliance maximum
load.
3. Close the door.
The value near the symbol on the
display shows the quantity of the
detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
4. Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
10.5 Filling the detergent and
additives
Compartment for prewash phase
an soak programme.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of
liquid additives.
Compartment for stain remover.
Flap for powder or liquid
detergent.
Always follow the
instructions that you find on
the packaging of the
detergent products.
10.6 Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
www.aeg.com
16
1
2
3. To use powder detergent, turn the
flap up.
A
4. To use liquid detergent, turn the flap
down.
B
With the flap in the
position DOWN:
Do not use
gelatinous or thick
liquid detergents.
Do not put more
liquid detergent than
the limit shown on in
the flap.
Do not set the
prewash phase.
Do not set the delay
start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
10.7 Starting the programme
without the delay start
Press button Start/Pause to start the
programme.
The related indicator stops flashing and
stays on.
On the display all indicator related to the
load and to the quantity of detergent go
off.
The indicator of the phase in operation
flashes.
10.8 Starting a programme
with the delay start
1. Press button Delay Start again and
again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Start/Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Start/Pause to start the
appliance, you can cancel or
change the set of the delay
start.
10.9 Cancelling the delay start
To cancel the delay start:
ENGLISH
17
1. Press button Start/Pause to set the
appliance to pause.
The related indicator flashes.
2. Press button Delay Start repeatedly
until the display shows .
3. Press button Start/Pause again to
start the programme immediately.
10.10 Cycle time recalculation
After approximately 15
minutes from the start of the
programme:
The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
The display shows the
new time value.
10.11 Cancelling a running
programme
1. Press button Auto Off to cancel the
programme and to deactivate the
appliance.
2. Press button Auto Off again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.12 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press button Start/Pause.
The related indicator flashes.
2. Change the option set.
3. Press the button Start/Pause again.
The programme continues.
10.13 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press button Start/Pause.
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press button
Start/Pause.
The programme or the delay start
continues.
10.14 End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display comes on and the door
locked indicator
goes off.
The indicator of Start/Pause button goes
off.
1. Press button Auto Off to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door ajar, to prevent
mildew and odours
10.15 Draining water out after
end of cycle
The washing programme is completed,
but there is water in the drum:
www.aeg.com
18
The drum turns regularly to prevent the
creases in the laundry.
The door lock indicator is on. The
door stays locked.
You must drain the water to open the
door:
1. If necessary, decrease the spin
speed.
2. Press the Start/Pause button.
The appliance drains the water and
spins.
3. When the programme is completed
and the door lock indicator
goes
off, you can open the door .
4. Press Auto Off some seconds to
deactivate the appliance.
The appliance drains and
spins automatically after
approximately18 hours.
10.16 AUTO OFF option
The AUTO OFF function automatically
deactivates the appliance to decrease
the energy consumption when:
You do not use the appliance for 5
minutes before you press Start/Pause
button.
Press the button Auto Off to activate
the appliance again.
After 5 minutes from the end of the
washing programme
Press the button Auto Off to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a
new cycle.
If you set a programme or an
option that ends with water
in the drum, the AUTO OFF
function doesn't deactivate
the appliance to remind you
to drain the water.
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
11.1 The laundry load
Divide the laundry in: white, coloured,
synthetics, delicates and wool.
Obey the washing instructions that
are on the laundry care labels.
Do not wash white and coloured
items together.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
Empty the pockets and unfold the
items.
Turn multilayered fabrics, wool and
items with painted illustrations inside
out.
Remove hard stains with a special
detergent.
Wash and pre-treat heavy soil stains
before putting items in drum
Be careful with the curtains. Remove
the hooks and put the curtains in a
washing bag or pillowcase.
Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights, etc. ).
A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase
again.
11.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
ENGLISH
19
Special stain removers are available. Use
the special stain remover that is
applicable to the type of stain and fabric.
11.3 Detergents and additives
Only use detergents and additives
specially made for washing machines:
powder detergents for all types of
fabric,
powder detergents for delicate
fabrics (40 °C max) and woollens,
liquid detergents, preferably for
low temperature wash
programmes (60 °C max) for all
types of fabric, or special for
woollens only.
Do not mix different types of
detergents.
To help the environment, do not use
more than the correct quantity of
detergent.
Obey the instructions that you find on
the on packaging of these products.
Use the correct products for the type
and colour of the fabric, the
programme temperature and the
level of soil.
If your appliance does not have the
detergent dispenser with the flap
device, add the liquid detergents with
a dosing ball (supplied by the
detergent's manufacturer).
11.4 Ecological hints
Always start a washing programme
with the maximum load of laundry
allowed.
If necessary, use a stain remover when
you set a programme with a low
temperature.
To use the correct quantity of
detergent, check the water hardness
of your domestic system. Refer to
"Water hardness".
11.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.
To know the water hardness in your area,
contact your local water authority.
Use the correct quantity of the water
softener. Obey the instructions that you
find on the packaging of the product.
12.
CARE AND CLEANING
WARNING!
Refer to Safety chapters.
12.1 External cleaning
Clean the appliance with soap and warm
water only. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents
or chemical products.
12.2 Descaling
If the water hardness in your area is high
or moderate, we recommend that you
use a water descaling product for
washing machines.
Regularly examine the drum to prevent
limescale and rust particles.
To remove rust particles use only special
products for washing machines. Do this
separately from the laundry wash.
Always obey the instructions
that you find on the
packaging of the product.
12.3 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Perform a maintenance wash
regularly. To do this:
Remove all laundry from the drum.
Select the cotton programme with the
highest temperature without
detergent.
www.aeg.com
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

AEG L89409FL User manual

Category
Washing machines
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI