Home » LAPSTER » LAPSTER 2 Ports Bi Directional HDMI Switch Splitter User Manual
LAPSTER 2 Ports Bi Directional HDMI Switch Splitter User Manual
Contents
1 Introduction
2 Package Contents
3 Installation
4 Documents /
Resources
5 Related Posts
Introduction
Thank you for purchasing LAPSTER HDMI Switch Splitter, 2 Port Bi-Directional Manual HDMI Switch 2 in 1 Out or
1 in 2 Out Splitter Supports 4K 2K 3D Full HD 1080p.
LAPSTER 2 Ports Bi Directional HDMI Switch Splitter User
Manual
Manuals+ — User Manuals Simplified.
This product has been designed to provide trouble-free, reliable operation. It benefits from both a LAPSTER 1-
year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and
retain it for future reference.
This bi-directional HDMI switch allows the user to connect two 4K Ultra HD source devices into a single 4K Ultra
HD display or projector, then easily switch between them at the push of a button. Alternatively, plug in one 4K
Ultra HD source and two 4K Ultra HD displays or projectors and switch between either output.
Package Contents
2 Port HDMI Bi-Directional Switch
Manual on box printed
Features
Input / Output: 3 x HDMI Type A (Female)
Maximum resolution: 3840×2160@60Hz 4:4:4 8-Bit with HDR support
Supported audio: Supports 7.1 channel of LPCM, Dolby TrueHD, and DTSHD Master Audio digital signals
Supports HDCP 1.4, 2.2 & DVI Compatible.
LED channel indicators
Installation
When using 1 source device and 2 displays, ensure all cables from source and display devices are connected to
the LAPSTER HDMI Bi-Directional switch before powering on any devices. First, power on your source device,
then power on your displays. Use the switch to select your desired channel. When using 2 source devices and 1
display, simply repeat the steps above, taking care to power on source devices before powering on your display
device. The following diagrams illustrate each configuration.
Configuration A shows one source device and two displays connected to the switch. The switch then allows the
user to easily alternate output between display 1 or display 2
Configuration B shows two source devices and one display connected to the switch. The switch then allows the
user to alternate between which source device is used to output to the display.
Connect two HDMI sources to one HDMI display
Documents / Resources
/
