FOXOLA G51 Handheld Industrial Endoscope User manual

Brand: FOXOLA

Model: G51 Handheld Industrial Endoscope

Type: User manual

G 51

Handheld Industrial

Endoscope User Manual

PACKAGE CONTENTS

Endoscope host*1

Camera accessories *4

Snake Tube Camera*1

User Manual

Handheld Industrial

Endoscope User Manual

Storage suitcase*1

USB-C charging cable*1

G 51 is a high-performance industrial endoscope camera with 5 inch HD color

display. It adopts ergonomic design, which makes it easy to operate.

Self-storage, support for photo and video functions, also the TF card

expansion function (up to 64G). This product is equipped with a small diameter

HD camera with LED auxiliary lighting. The camera adopts a high-sensitivity

chip, which can be used normally even in a dark working environment.

●The product is an industrial endoscopy camera and is not intended

for medical use or human examination.

●Do not hit the camera violently and do not pull the cable.

●When used in an environment with sharp bumps, please use it carefully

to prevent the waterproof protective layer of the probe from being scratched.

●The camera probe is not made of heat-resistant and high-temperature materi

als. When checking the automobile engine, please ensure that the tempera

ture in the engine drops to the normal emperature.

●When not in use, please ensure that the lens and the main unit are clean

anddry, and avoid contact with oil, etc. or other corrosive and dangerous

substances.

●This product is not suitable for people with limited physical, sensory ormental

abilities.

●Do not allow children to touch and operate this equipment.

PRODUCT DESCRIPTION

SAFETY AND MAINTENANCE

●Please use a 5V household charger that meets the safety regulations

to charge the equipment. Fast charging is not supported.

●This device supports charging while using.

●lf the device is not used for a long time, please ensure that it is charged

at least once every 3 months to prevent irreparable damage caused by

excessive discharge of the battery.

BATTERY INSTRUCTIONS

FUNCTION INTRODUCTION

7Down selection key

Scroll down / Picture rotation / Video

playback back key

8Adjust the light

Adjust the brightness of the camera LED

9Mode switching

Switch between 3 function modes of take

photo, video and photo album

10 Taking photos

Short press to take photos /

Start recording / End recording

1Up selection key

Up/Zoom in / Video playback fast forward key

2Switch camera

Cycle switching：cam A -- cam B -- cam C

--cam A

3Setting key

4MIC

Recording hole

Enter / Exit the setting interface

Switch

Press and hold for 3 seconds to turn on / off

6Enter

Confirm selection / Image fixed

14 Camera connection cable lock switch

When pressed, insert/pull out the camera

connection plug into the snake line socket,

and when released, lock the snake line

16 Camera connection socket

Connect the camera

18 Speaker

Video/on/off/prompt sound playback

15 LED torch switch

Press to turn on the LED torch

Flashlight

Adjustable angle of lamp

11 Charging interface

Support USB-C 5V/1A

ordinary charging

12 Reset button

When the product crashes, press

it to restart the device

TF card slot

Support to expand 0-64G

TF (Micro SD) card

CAMERA KIT

CAMERA ACCESSORIES

Rotating fixation

1Protective cover

Protect the camera lens, has been

installed on the camera

2Magnet

Used to magnetically attract metal

fragments, parts, etc

3Small hook

Hook for rings, keychains, etc

4Sharp hook

Hook for soft objects such as plastic

bags and fruits

5Big hook

Hooks large objects such as ropes

and cables

1 2

1080P front camera

record video/take photos

1080P side camera

record video/take photos

1080P side camera

record video/take photos

CAM：A CAM：B

CAM：C

PRODUCT SPECIFICATIONS

Camera

Front camera pixels

Side camera pixels

Camera diameter

Camera angle

Camera focal

length range

Camera LED lights

Cable length

Water proof

Video resolution

Photo resolution

Video format

Photo format

A: 2.0MP 1920*1080P

B: 2.0MP 1920*1080P

C: 2.0MP 1920*1080P

8.0mm

A: Front 78°

B: Side 70° C: Side 70°

A: Front 20-100mm

B: Side 20-50mm C: Side 20-50mm

A: 8 LED lamp beads, 3-level

adjustable brightness

B: 1 LED lamp beads, C: 1 LED lamp beads

3-level adjustable brightness

16.4ft(5m) / 10FT(3m) / 3.3FT(1m)

IP67

1280*720P

1920*1080P/1280*720P

MP4

JPEG

Screen

Others

Screen

Screen resolution

Zoom

TF card capacity

Charging port

Battery capacity

Working time

Battery charging time

Operating temperature

5.0 Inch IPS Screen

854*480P

1.5X 2.0X

Support expansion 0-64GB

TF (Micro SD) card

5V/1A USB-C port

4400mAh Li-battery

6 Hours

5 Hours

13℉ ~ 112℉ (-25℃ ~ 50℃)

Camera temperature -22℉ ~ 176℉ (-30℃ ~ 80℃)

2. Insert the cable plug into the cable

socket of the main unit, release the lock

switch, and then rotate the thread to fix it

●Please insert the TF card in the off state

●Please pay attention to whether the

insertion direction and front and back

sidesof TF card are correct

●Do not use excessive force when inserting

or pulling out the TF card to prevent

damage tothe card slot structur

1.Press and hold the camera cable lock

switch button

QUICK TO USE

Insert TF card

Insert TF card:

“ ”

4. After connecting the camera, press and

hold the power switch button “ ”for 3

seconds to turn it on to start working

3.Before using this device, you need to insert the TF card

OPERATION DETAILS

1.5X

1.0X

1.5X

2.0X

After the device is turned on, the device

defaults to the camera mode, click " " key

to take a photo

Click the " " button once to enter the video

mode, click " " key to start recording, and

click again to end the recording

Click the " " button again to enter the view

photo/video mode

The " " key is set as: " "-" "-" ", three

modes are selected cyclically

Click " " key, you can switch the camera,

cycle selection: cam A - cam B - cam C

(can only operate in " ", " " two modes)

Click the " " key to rotate the current

screen 180 degrees, click again to restore.

(can only operate in " ", " " two modes)

Click " " key, you can control the intensity

of the camera light, cycle selection: - - -

(can only operate in " ", " " two modes)

Click " " key, you can zoom in the screen

multiple, cycle selection: 1.0X-1.5X-2.0X

(can only operate in " ", " " two modes)

" " Mode operation instructions:

SETTINGS

VID_003.AVI

00:00/00:02

3/49IMG_001_JPG 1/49

1. Click the " " " " button to view all

saved photos and videos, if you need to delete

the current photo or video file, click the " "

button to delete

2. The current file is a video file, click the " "

button for the play/pause function, click the

" " " " button for the fast-forward and

fast-rewind function

1. Click the " " button to enter the " "

setting mode.

2. Use the " ", " " keys to move the

gray cursor and select the desired menu

item.

3. Select the desired item, click the " " key

to enter, use the " " and " " keys to

select the required parameters, and then

click the " " key to confirm.

4. After the setting is completed, click the

" " key twice to exit the setting mode.

1. Double click " "button to enter the

" "setting mode.

2. Use the " ", " " keys to move the

gray cursor and select the desired menu

item.

3. Select the desired item, click the " " key

to enter, use the " ", " " keys to select

the required parameters, and then click the

" " key to confirm.

4. After the setting is completed, click the

" " button again to exit the setting mode.

5. When using it for the first time, you

need to go to " " to select the desired

language (the factory setting of this device

is: English).

TYPE-C data cable

Card Reader

Use the type-C charging cable to

charge the device

Can use a tf card to copy directly, or use a type-c cable to connect to computer

for copy

When operating the copy, if the machine is not connected to the computer,

please restart the machine or plug and unplug the TYPE-C data line. Do not

plug and unplug the TYPE-C data cable during the data transmission process,

which will cause the data transmission to fail.

COPY PICTURE AND VIDEO FILES

CHARGING GUIDE

Charging Guide

●Connect the device to the TYPE-C USB

adapter for charging(5V 1A/5V 2A). The

product does not support fast charging.

●During the charging process, the power

symbol indicates that the charging is in

progress；

●When the device is fully charged, the

power display shows the full state

FAQ

1.The product does not output a picture or the screen turns black

Remove the flexible conduit joint, reassemble and tighten it, or restart the

device.

2.Lags happened during the photo outputting of the product

Please check whether the product has sufficient power, or restart the device,

or reassemble the flexible conduit.

3.Product crash

Please press the reset button on the back of the device, restart the device.

4.Imaging screen is not clear

The best imaging focal length of the product is: 2cm-10cm, please calibrate

the distance to the object, or clean the front of the camera with a clean

alcohol cloth.

5.Product charging

Please use (5V 1A/5V 2A) charger to charge the device.The product does

not support fast charging.

6.The camera is heat

It is normal for the camera to heat up, especially when the camera LED light

is on at the highest brightness.But it does not affect normal use or service

life.

7.TF card can not be recognized

Please confirm whether the TF format is FTA32 . lf not, please format it and

do not recognize it. Please plug and unplug the TF card again；

The device supports Class 10 high-speed memory cards and does not

support Class 4 low-speed memory cards

FCC statement

WEEE Compliance

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product

and its electronic accessories should not be disposed of with other household waste

at the end of their working life.

To prevent possible harm to the environment or human ,health from

uncontrolled waste disposal, please separate these items from other types of waste

and recycle them responsibly to promote the sustainable reuse of material

resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they can

take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions

of the purchase contract.

This product and its electronic accessories should not be mixed with other

commercial wastes for disposal.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference，

(2) This device must accept any interference received, including interference that

maycause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

FOXOLA G51 Handheld Industrial Endoscope User manual

Brand: FOXOLA

Model: G51 Handheld Industrial Endoscope

Type: User manual

Download PDF

report

FOXOLA G51 Handheld Industrial Endoscope User manual

FOXOLA G51 Handheld Industrial Endoscope User manual

Other documents