Chipolino Kid's toy tricycle Be Active Operating instructions

Chipolino
Brand
Chipolino
Model
Kid's toy tricycle Be Active
Category
Learning toys
Type
Operating instructions
This product is produced in accordance with
requirements of Toy safety Directive 2009/48/EC of the European
Parliament and the Council, Regulation regarding Essential Requirements
and Conformity Assessment of Toys, Regulation regarding Conformity
Marking and the standards applicable for this toy.
PLEASE READ CAREFULLY THIS INSTRUCTION MANUAL AND
KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE!
INSTRUCTION MANUAL FOR
KIDS’ TOY TRICYCLE
„BE ACTIVE”
1
FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN
THIS MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT:
CAUTION! USE ONLY UNDER DIRECT ADULT SUPERVISION!
CAUTION! THIS TOY HAS NO BRAKES!
CAUTION! THE TOY IS NOT SUITBALE FOR CHILDREN UNDER 1,5 YEARS!
CAUTION! USE FOR CHILDREN OLDER THAN 1,5 YEARS AND WEIGHT UP TO 25kg.
CAUTION! DO NOT USE FOR CHILDREN OVER 25KG – DANGER OF OVERLOADING
THE TOY!
CAUTION! BEFORE USING THE TRICYCLE, TEACH THE CHILD THE CORRECT WAY TO
USE IT AND THE SAFETY RULES.
CAUTION! USE THE TOY ONLY FOR ITS PURPOSE.
CAUTION! USE THE TOY ONLY DURING THE DAY ON EVEN PLAYGROUNDS AND AT A SAFE
DISTANCE FROM STREETS OR ROAD LANES FOR VEHICLES.
CAUTION! TO AVOID THE DANGER OF INJURY ALWAYS REMOVE THE PUSH HANDLE
WHENEVER THE CHILD IS RIDING THE TOY ON HIS OWN!
CAUTION! KEEP AWAY FROM FIRE OR OTHER HEAT SOURCES!
Adult assembly required!
DO NOT allow presence of children under 3 years before assembly of the TOY is complete.
In this way, you will avoid their access to small or loose parts!
The TOY is intended for one child at a time ONLY!
DO NOT let other children push the tricycle!
The TOY is NOT suitable for running or skating!
 DiscontinueusingtheTOYifyoundmissingordamagedparts.
DO NOT let the child stand on the footrest or the seat to avoid injury.
The child must wear shoes when using the TOY!
DO NOTtiestringsoraccessoriestotheTOYinordertoavoidtheriskofsuocation.
DO NOT place more than 0,2 kg load in the front storage basket and no more than 0,5 kg load in
the rear basket.
DO NOT put items or luggage in the handle bar or the parent handle in order to avoid risk of injury
resulting from the toy’s instability and tipping over!
DO NOT place items or heavy objects in the TOY or on it during storage or transportation to avoid
damage to the frame.
DO NOT use another transport means to move the TOY by pulling it.
DO NOT allow the child using the TOY or other children around it to touch the wheels or put items
in them.
Use away from rivers, pools, stairs or hurdles!
 DonotmakechangesormodicationstotheTOYframe!Ifnecessary,contacttheretaileroran
authorized service center for advice and repair.
Use only spare parts, which are approved by the producer and recommended by the distributor or
 companyservice!Theproducerrevokesallresponsibilityincasepartsdierentfromthe original
ones have been used.
 Keepnylonpackagesawayfromchildrentoavoidriskofsuocation!
CAUTION! WARNINGS!
A reminder that the toy should be used with caution since skill is required to
avoid falls or collisions causing injury to the user or third parties.
2
IMPORTANT! WARNINGS AND GUIDELINES FOR BATTERY USE
After installation of batteries, always secure the battery compartment with the cover.
Do not allow children to access or play with the batteries!
Use only batteries of the designated type and power.
 Donotusebatteriesofdierenttypes.
Do not short circuit the contact surfaces!
Follow the designated polarity in the battery compartment.
Remove damaged or worn out batteries.
Remove the batteries when the product will not be used for long time.
 Donotthrowthebatteriesinopenre.Donottakethebatteriestopieces.
CAUTION! Waste from depleted or unusable batteries must be disposed of separately. It is
forbidden to throw them out in containers for household waste. Dispose of the batteries only
atthespeciedplaces.
PRODUCT FEATURES
This is a functional TOY whose purpose is to create in the child initial skills to coordinate its arms
and feet when riding a tricycle or bicycle.
IMPORTANT! Remove the parent handle when you are sure that the child can ride the tricycle on
his own and unaided.
Suitable for children older than 1,5 years with weight up to 25 kg;
Can be driven by the child using the pedals;
Seat rotates at 360° degrees;
Musical box with melodies and lights;
Can be pushed by an adult and the child lays his feet on the foot rest;
Safety bumper;
Parking device;
Backrest adjustment;
Movable foot rest;
Upper leg rest;
Adjustable canopy;
Front and rear storage baskets.
Non-rechargeable batteries are not to be recharged ;
For electric toys using rechargeable batteries, the batteries ,the batteries shold
be charged under adult supervision. For batteries charged using a battery charger
for use by children , "Batteries are only to be charged by persons of at least 8 years old";
Different types of batteries or new and used batteries are not to be mixed;
Exhausted batteries are to be removed from the toy;
The supply terminals are not to be short-circuited
3
MAIN PARTS
1Frame 9Fabric cover
2Fork 10 Front guards
3Front wheel 11 Accessories bag
4Rear wheels 12 Front storage basket
5Steering bar with musical box 13 Mud guard
6Parent handle 14 Rear basket with foot rest
7Canopy 15 Accessories
8Seat with upper leg rest 16 Guiding rod
Please, make sure if these parts are in the package.
Some of the parts may be pre-installed by the manufacturer.
13121110 14
15
16
1 2 3 4
5
6
7
89
4
Necessary tools: wrench and screwdriver (not included).
ASSEMBLY INSTRUCTIONS
IMPORTANT! Follow exactly the instructions given and check the pictures. Keep your hands from
entrapment!
IMPORTANT! AFTER EACH OPERATION, MAKE SURE THAT YOU HAVE FOLLOWED
THE INSTRUCTIONS CORRECTLY AND THE FIXING IS STABLE!
CAUTION!Makesureallxingsaretightbutnotovertightenthem.Ifsomepartsareloosethiscould
cause disintegration of the tricycle and injury to your child.
ASSEMBLY
1. ASSEMBLY OF FORK (WITH FRONT WHEEL AND MUD GUARD) TO THE TUBE ON FRAME
1-1–Placethemudguard(13)betweenbothtubesoffork,asshowninthegure.
1-2 – Fix the mud guard with a screw by using a screwdriver.
1-3 – Place the front wheel to the tubes of fork. Press the pins (a) and insert them inwards until they jump
outoftheopenings.Byxingyouwillhearaclicksound.
1-4–Placethecovers(fromaccessoriesset-15)onfronttubesofframeasshowninthegure.
1-5 – Thread the fork tube through the front tube of frame.
2. ASSEMBLY OF THE HANDLEBAR
2-1 – Place the front basket onto the tube of fork.
2-2 – Install the steering bar to the fork, press the pins (b)andjointhesteeringbarandthefork.Byxing
you will hear a click sound and pins will show through the openings.
2-3 – Place the decorative cover (d) and tighten the screw with plastic head (c)toxit.
3. ASSEMBLY OF REAR WHEELS AND PARKING DEVICE
3-1 – Place the part (e) from accessories set to rear wheel, so they match. Place the part (e) from
accessories set to the other rear wheel.
3-2 – Align parking device (f)totherearpartoftheframeasgureshowsandinsertit.
3-3 – Place the rear axis to the rear wheel and insert them with pressure to the frame until you hear a
clickandtheyx.
Note:Makesurethatwheelisxedbytryingtopullitoutfromtheframe.Installtheotherrearwheel
following the same order of actions.
3-4 – To remove the each of the rear wheels, press the button (k) and remove the wheel.
3-5 – Press with light pressure the decorative cap (m) from accessories set on each of the wheels.
4. INSTALLING THE DOWN PART OF THE PARENT PUSH HANDLE
4-1–Placebothplasticwashersatbothsidesoftheframeasshowninthegure.
4-2 – Press pin (g) and thread the down part of the parent push handle through the slot at the frame,
asshowninthegure.
5. INSTALLING THE REAR STORAGE BASKET
Placetherearbaskettorearpartoftheframeandxwiththescrewwithplastichead(h).
5
6. INSTALLING THE GUIDING AXLE
6-1 – Place the cover (n) at the plate of the fork.
6-2 – Insert the bent end of the guiding axle in the corresponding opening in the plate of the fork
(with installed cover).
6-3 – Unfold the foot rest. Place the other end of the guiding axle in the plate in the lower part of the push
handleandxitwithanut–youwillneedawrenchtodothis.
7. INSTALLING THE UPPER PART OF PARENT PUSH HANDLE
7-1and7-2–Presspinsandinsertthetubesofupperpartofhandle,asshowninthegureuntilyou
hear a clock sound and pins jump out of the openings.
7-3 – Press pins the pin (n) and insert the upper part of the handle into the down part of the handle until
you hear a click sound and pin jumps out of the opening.
To remove the handle, move the red lever down and press the pin and then remove both parts of the
parent handle.
8. INSTALLING THE SEAT
8-1 – Place the seat on the frame (screws must go through the slots) and
8-2 – Fix the seat with the nuts with plastic head.
9. ASSEMBLY OF FRONT BUMPER
9-1 – Press the pin (p) and insert the shoulder of bumper guard into the slot of frame until you hear a
click a sound and pin shows from the slot. Assemble the other shoulder of bumper guard on other side
as well.
9-2 – Rotate both shoulders and x them one to another. By locking you will hear a click sound.
To unlock the bumper, press the button (k) and set both shoulders out.
10. PLACING THE FABRIC PART
Placethefabricpartontheseat,asshowninthegure.FixthefabriccoverwithVelcrostrapsatthe
back of the seat. Unlock the bumper guard and thread the crotch fabric onto one of the bumper guards’
shoulders. Then lock again both shoulders of bumper guard.
11. ASSEMBLY OF CANOPY
11-1 – Insert the two ends of the canopy in the corresponding grooves on both sides of the seat as
showninthegure.
11-2 – Assembled canopy.
12. ACCESSORY BAG INSTALLATION
Placetheaccessorybagattheparenthandle,asshowninthegure.FixitwithVelcrostrapsatboth
sides by wrapping them around the tubes.
13. UNFOLD AND FOLD THE CANOPY
Pull the canopy with your hand to unfold it and push it back to fold it.
14. BACKREST ADJUSTMENT
Press the red button at the back of the seat and set the backrest in required position – upright or reclined.
15. ROTATING THE SEAT AT 360°
ATTENTION!Torotatetheseatat360degree,youhavetoremovetheupperlegrestfromtheseatrst!
FUNCTIONS
6
1-1 1-2
13
1-3 1-4 1-5
Press down the red lever under the seat and rotate the seat in the desired position.
Afterrotation,theseatmaybexedintwodirections–FORWARD(facingtothefront)andREARWARD
(facingtotheback).Whenthepositionisxed,youwillhearaclicksound.
16. FOLDING THE FOOT REST
Fold the two steps on the footrest with your hand. Press the button (1) and shift the foot rest up.
Whenthefootrestisxedyouwillhearaclick.
To open the foot rest, press the button (1) and shift the foot rest down.
CAUTION! When the parent pushes the tricycle, use the foot rest in open position. When the child rides
the tricycle, fold the foot rests.
17. MUSICAL BOX
Press the button 4 and 5 - melodies and lights start.
To use this function, you have to install 3 pcs batteries size AA/1.5V in battery compartment:
1. Untighten the screw (1) and cover (2) by using a screwdriver and remove it.
Note: Cover of battery compartment (3) is located at down part of the musical box.
2. Install 3 pcs batteries size AA/1.5V in battery compartment obeying the shown polarity.
3. Press one of the buttons to check if functions are activated.
 4.Placebackthecover(2)ofbatteriescompartment(3)andxwithscrew(1).
WARNING! The push handle may be removed after you are sure that the child can drive the tricycle on
his own.
a
2-1 2-2 2-3 3-1 3-2
de
f
b
c
12
7
3-3 3-4 3-5 4-1 4-2
k
n
p
k
m
g
“click“
“click“
“click“
“click“
“click“
5 6-1
7-1
8-1 8-2 9-1 9-2
7-2 7-3 7-4
6-2 6-3
m
h
8
10
13 14 15
16
17
23
4 5
1
3 pcs batteries size AA/1.5V
(1) (1)
11 12
Folding Unfolding
9
MAINTENANCE GUIDELINES
Periodically check the good working order of the tricycle parts.
Do not wash it and do not soak it in water. Use a soft damp cloth and water or neutral liquid
detergent.
Do not use aggressive detergents, containing abrasive particles, ammonia, bleach or spirits.
Regularly oil the moving parts.
Do not use on sand.
Do not store the tricycle in hot environment, in order to avoid the plastic parts from deforming.
Store the product in clean and dry place indoors. Do not expose to direct sunlight, moisture or
harsh weather!
Always let the tricycle to dry out fully before storing or using it, in order to avoid mold and rust.
Contact your authorized dealer if consultation or repair is needed.
Materials used:plastic,metal,textileandtextilelling–100%polyester.
TRKBA024xххх/ X4
CHIPOLINO LTD., 1 Goliamokonarsko Shosse Str, Plovdiv, BULGARIA
www.chipolino.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Chipolino Kid's toy tricycle Be Active Operating instructions

Chipolino
Brand
Chipolino
Model
Kid's toy tricycle Be Active
Category
Learning toys
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents