GreenBrook ROT4P16A Operating instructions

Brand
GreenBrook
Model
ROT4P16A
Type
Operating instructions

This manual is also suitable for

INSTALLATION/OPERATING INSTRUCTIONS
FOR ROTARY ISOLATORS
Model Numbers:
ROT3P16A, ROT4P16A, ROT3P32A, ROT4P32A,
ROT3P63A, ROT4P63A
1. Unscrew the top and bottom case fixing screws and remove
top case.
2. Mount the lower case in position on a flat surface, by drilling
out the four internal mounting bushes and screwing the lower
base onto the mounting surface. To ensure the IP rating, fill the
four mounting bushes with silicon sealant.
3. Lower case has two 20mm knock outs top and bottom,
remove the appropriate knock outs and fit with a suitable IP
rated gland.
4. Make the live feed and load electrical connections to the
required terminals on the switch block, note that the Rotary
Isolator comes with earth and neutral connectors fitted.
5. Re-fit top case, as removed in step 1above.
6. Installation is now complete.
INSTALLATION
GUARANTEE
Thank you for purchasing a quality Rotary Isolator from KingShield.
Please read these instructions fully prior to initial use.
Every effort has been made to ensure that the guidance information
on this sheet will enable the installation of the isolator to be carried
out safely and correctly.
IF IN DOUBT, INSTALLATION SHOULD BE MADE BY A
QUALIFIED ELECTRICIAN IN ACCORDANCE WITH
CURRENT WIRING REGULATIONS.
PPLLEEAASSEE KKEEEEPP TTHHEESSEE IINNSSTTRRUUCCTTIIOONNSS SSAAFFEE
FFOORR FFUUTTUURREE RREEFFEERREENNCCEE
Issue no: 702639
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
[email protected]
W W W. G R E E N B R O O K . C O . U K
Your KingShield Rotary Isolator is guaranteed for 12 months from
the date of purchase. This does not affect your statutory rights.
Rotary Isolator Instructions July 2011:Layout 1 1/9/11 16:17 Page 1
  • Page 1 1

GreenBrook ROT4P16A Operating instructions

Brand
GreenBrook
Model
ROT4P16A
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents