SKYDANCE PK4(WZS) User manual

Type
User manual

This manual is also suitable for

PK4(WZS)
PK8(WZS)
PK8(WZS),PK4(WZS)
Page 1
2023.7
Mechanical Structures and Installations
User Manual Ver 2.0.0
Technical Parameters
Zigbee 3.0
Input and Output
Gross weight
Size
Package
0.223kg
Operation temperature
Case temperature (Max.)
Environment
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
L112x W112 x H50mm
Ta: -30
O
C ~ +55
O
C
Tc: +65
O
C
IP20
IP rating
5 years
Warranty
Warranty
LVD RED
Installation diagram:
Base
Uninstall button Turn the screw Install the button
Typical base as below:
European style 86 size
Zigbee 3.0 Wall Mounted Scene Panel
4/8 button scene panel remote with scene recall.
Built-in Tuya Zigbee 3.0 remote module,
supports scenario linkage and one-click execution.
Set scene function through Tuya APP.
Each button has a blue LED indicator.
Customizable button words.
Provide a variety of English button stickers,
which can flexibly define the functions of each button.
Button name: All ON, All OFF, Go home, Leave home,
Main lighting, Comfort, Bright, Play, Film, Reception, Work,
Read, Get up, Sleep, Living room, Dining room, Atmosphere,
Spotlight, Light strip, Downlight, Curtain ON, Curtain OFF,
All ON/OFF, ON/OFF.
4, 8 Scene button / Zigbee 3.0 / AC input
86.00 mm
86.00 mm
52.00 mm
52.00 mm
59.00 mm 25.50 mm
35.50 mm
AC input L
AC input N
LN
INPUT 100-240VAC
Input voltage 100-240VAC
Input current Max 0.1A
Output signal Zigbee 3.0
Remote distance 30m(Barrier-free space)
Keyfunction
Short press the scene to recall the corresponding scene, button
the blue light flashes 6 times.
Press and hold the scene button for 3 seconds to close
the corresponding scene(only for group control),
the blue light flashes 6 times.
Before use the scene panel, please edit the scene setting through
Tuya / APP firstly. Smart life
PK8(WZS)
12
1: Scene 1 2: Scene 2 3: Scene 3 4: Scene 4
5: Scene 5 6: Scene 6 7: Scene 7 8: Scene 8
PK4(WZS)
1: Scene 1 2: Scene 2
3: Scene 3 4: Scene 4
3
5
7
4
6
8
1
3
2
4
There are 8 scenes in the Tuya APP, which can be set to group control or linkage scenes.
group control is used for the overall control of multiple lamps, like the light adjustment of the entire room.
Linkage scene is used for linkage control of different equipment, such lamps and curtains on and off together.
Example 1, set scene 1 for synchronous light control of the whole room:
(1) Select scene 1 and open the group control settings.
(2) You can change the scene name, add one or more devices, adjust brightness and , then save it.color
(3) After successful setting, you can use the remote to control these lamps directly.
Example 2, set scene 2 to set up a scenario where different lamps or curtains are controlled together with different color or on/off state.
(1) Select Scene 2 and open the linkage scene settings.
(2) You can change the scene name, add "one-click execution" tasks, select the devices that need to be linked, save the required functions, such as
ON/OFF, mode, brightness and .color temperature
(3) After successful setup, you can use the remote to directly control all linked devices to the desired scene.
2. Remote association and scene settings
APP Operating Instructions
Download the Tuya APP and register anaccount, search and add the Tuya Zigbee gateway device.
For PK4: Press and hold the "Scene 1" and "Scene 4" button until the 4 LED indicator light flashes.
Under the gateway, you can find WZS-Scene Panel device in Tuya APP.
After successful network pairing, the 4 LED indicator light will be on for 2 seconds and then off.
For PK8: Press and hold the "Scene 1" and "Scene 8" button until the 8 LED indicator light flashes.
Under the gateway, you can find WZS-Scene Panel device in Tuya APP.
After successful network pairing, the 8 LED indicator light will be on for 2 seconds and then off.
Under the gateway, search and add one or more ZBS-DIM, ZBS-CCT, ZBS-RGB, ZBS-RGBW, ZBS-RGB+CCT light devices.
Unpair scene panel: Re-operate the pairing action to unpair.
1. Network pairing
Note:
The scene1-8 in Tuya APP is correspond to the scene 1-8 button on the scene panel.
You can select one scene button to set ALL OFF linkage scene function to turn off all lights.
To delete the scene function, you can select "Reset" in the scene settings.
Group conrtol Group conrtol Group conrtol
Packing List
User Manual
1 pcs
Accessories
(screw 2 pcs)
Scene Panel
1 pcs
Button stickers
1 pcs
Page 2
2023.7
User Manual Ver 2.0.0
1. The installation height is ≥1M from the ground to avoid the shortening of
the remote control distance due to weak transmitting/receiving signals.
2. The products are not allowed to be close to or covered by metal objects,
with an interval of ≥ 20cm to avoid signal attenuation and shorten
the remote distance.
InstallationPrecautions
  • Page 1 1
  • Page 2 2

SKYDANCE PK4(WZS) User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI