Cincoze DS-1100 Series Owner's manual

Rugged Workstation

7/6th Generation Intel® Core™ i3 / i5 / i7 (Kaby Lake-S/ Skylake-S)

High Performance, Modular and Expandable Rugged Embedded

Computer

DS-1100 Series

User Manual

Version: V2.42

Rugged Embedded Computer

DS-1100 Series | User Manual 2

Contents

Preface

Revision……………………………………………..……………….……………...……………...05

Copyright Notice.…………………………………………………………………………………...05

Acknowledgement.……………………………………………………………….........................05

Disclaimer.………………………………………………………………….………………...........05

Declaration of Conformity.………………………………………………….……………………05

Product Warranty Statement …………………………………………………………….............06

Technical Support and Assistance.…………………………………………….…………………07

Conventions Used in this Manual …………………………………………….…………............08

Safety Precaution …...……………………………………………….………….………..............08

Package Contents ………………………………………………………….…….………...……10

Ordering Information …………………………………...…………………….…….……...……...10

Chapter 1 Product Introductions

1.1 Overview …………………………………………………….……......……………..............12

1.2 Highlights …………………………………………………….…………....……………........12

1.3 Product Pictures……...……………………………………….……………………..............13

1.4 Key Features …………………..................………………….…………………….…..........13

1.5 Hardware Specification ……………..……………………….……...………………....……14

1.6 System I/O ……………………………………......…………….……………………............15

1.6.1 Front ……………………………………......…………………………………………..15

1.6.2 Rear ………….………………………………….………………………….......………17

1.7 Mechanical Dimension …………………………………….………...………......……........19

Chapter 2 Switches and Connectors

2.1 Location of Switches and Connectors ………….………………………………...………..22

2.1.1 Top View ……………………………….……………………………………...………..22

2.1.2 Bottom View ……………………………………………………………...……............23

2.2 Switches and Connectors Definition…………………..….……………………………….24

2.3 Definition of Switches.……...……………..............................................……..................25

2.4 Definition of Connectors …...….……...……….............……………….............................26

Chapter 3 System Setup

3.1 Removing the Top Cover ……...……………………………….….…………………..........37

3.2 Installing CPU ………………………………………………………………….……………40

3.3 Installing SO-DIMM Memory…………………………………....…………….……………43

3.4 Installing a Mini-PCIe/mSATA Card on Top Side…………………………………..........46

3.5 Installing a Mini-PCIe/mSATA Card on Bottom Side……………..…………………...…48

3.6 Installing Antennas…….…….…………..……….…………………………………………..49

DS-1100 Series | User Manual 3

3.7 Installing a SATA Hard Drive on Top Side…………………………………………………51

3.8 Installing a Low Speed CMI Module……………....…………….…………….....................53

3.9 Installing a High Speed CMI Module……..………....….……………………….…............56

3.10 Installing a CFM-IGN Power Ignition Module…...….…………………………...…………61

3.11 Installing the Internal FAN (For DS-1102 only)………………...….……………............62

3.12 Installing a PCI/PCIe Add-on Card (For DS-1101 and DS-1102 only)….…............63

3.13 Assembling the System….……...……….………...….……………………….…............67

3.14 Installing a SATA Hard Drive at Front Side………...….……………………….…............70

3.15 Installing a SIM Card……….……...……….………...….……………………….…............72

3.16 Installing the CMOS Battery.……...……….………...….……………………….…............74

3.17 Fastening the Cover……….……...……….………...….……………………….…............76

3.18 Installing an External Fan….……...……….………...….……………………….…............76

3.19 Wall Mount Brackets……….……...……….………...….……………………….…............79

Chapter 4 BIOS Setup

4.1 BIOS Introduction …….……….…………….…….…..….……………………...................82

4.2 Main Setup ……...……….…..……………….…..….………………........…………...........83

4.2.1 System Date …….……………………………………………...……………..............83

4.2.2 System Time ………..……………………………………………..……….................83

4.3 Advanced Setup ……………………………………………………………………………...83

4.3.1 ACPI Settings ………………………………………………………………………….83

4.3.2 AMT Configuration…………………………………………………………………...85

4.3.3 PCH-FW Configuration.………………………...……………………….…................86

4.3.4 F81866 Super IO Configuration……………………………….…………………....86

4.3.5 Hardware Monitor…………..…………………...……………………….…................88

4.3.6 S5 RTC Wake Settings……………………………………………………………....88

4.3.7 Serial Port Console Redirection……………………………………….……..….....89

4.3.8 CPU Configuration……..…………………………………………………………......89

4.3.9 SATA Configuration……..…………………………………………………………......90

4.3.10 PCI Subsystem Settings …………….………………………………………..........92

4.3.11 CSM Configuration……..….……….…………………………………………..........94

4.3.12 USB Configuration………….…………………………………………………..........95

4.4 Chipset Setup …...……….…………………..…..….…..…………………………………...96

4.4.1 System Agent (SA) Configuration ……………..……………………………………..96

4.4.2 PCH-IO Configuration ………………….……………………………………………..97

4.5 Security Setup …...……….………………….…..…. …………..……………………....99

4.5.1 Administrator Password …….…...………………………………………………….99

4.5.2 User Password …….…………………………………………………..…………….99

4.5.3 Security Boot…..……………………………………………………………..……….99

DS-1100 Series | User Manual 4

4.6 Boot Setup …...……….….……………………………...…..….…..………..…………....100

4.6.1 Setup Prompt Timeout………………………….…………………………………… 100

4.6.2 Bootup NumLock State…………………..…………………………………………100

4.6.3 Quiet Boot ……………………………………………………….………………….100

4.6.4 Fast Boot ……………..……………………………………………………………100

4.7 Save & Exit …...……….….………………….…..….…..………………………................101

4.7.1 Save Changes and Exit ………………..………………………………...................101

4.7.2 Discard Changes and Exit …………………………………………………………101

4.7.3 Save Changes and Reset …………………………………………………………101

4.7.4 Discard Changes and Reset...……………………………………………………101

4.7.5 Save Changes ………………………………………………………………………101

4.7.6 Discard Changes ……………………………………………………………………101

4.7.7 Restore Defaults …………………………………….………………………………101

4.7.8 Save as User Defaults ………………………………………………………………101

4.7.9 Restore User Defaults ..…………………………….………………………………101

Chapter 5 Product Application (For DIO Only)

5.1 Digital I/O (DIO) application ………..………………………………………………………103

5.1.1 Digital I/O Programming Guide ……………………………………………………103

5.2 Digital I/O (DIO) Hardware Specification …………………………………………………108

5.2.1 CMI-CD, CMI-ICD Connector Definition..……...……………..............................109

DS-1100 Series | User Manual 5

Preface

Revision

Description

Date

1.00

New Release

2016/11/18

2.00

Advancing DS-1100 Series to Revision R20

2018/9/17

2.10

Correction Made

2018/11/20

2.20

Correction Made

2019/08/13

2.30

Update the Supporting Capacity of Memory to the latest

2019/11/08

2.31

Correction Made

2019/11/21

2.32

Correction Made

2020/04/09

2.33

New Format Updated

2020/10/07

2.34

Correction Made

2020/11/13

2.35

Correction Made

2021/01/26

2.36

LVD Number Updated

2021/02/20

2.37

Add DC_IN1 Warning

2021/04/20

2.38

Correction Made

2021/06/28

2.39

Add CMI-XM12LAN01-R10 installation steps

2021/07/26

2.40

Correction Made

2021/08/10

2.41

Correction Made

2022/05/31

2.42

Correction Made

2023/04/14

Copyright Notice

modified, or reproduced in any form or by any means for commercial use without the prior

written permission of Cincoze Co., Ltd. All information and specification provided in this

manual are for reference only and remain subject to change without prior notice.

Acknowledgement

Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product

names mentioned herein are used for identification purposes only and may be trademarks

and/or registered trademarks of their respective owners.

Disclaimer

This manual is intended to be used as a practical and informative guide only and is subject

to change without notice. It does not represent a commitment on the part of Cincoze. This

product might include unintentional technical or typographical errors. Changes are

periodically made to the information herein to correct such errors, and these changes are

incorporated into new editions of the publication.

DS-1100 Series | User Manual 6

Declaration of Conformity

FCC

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

CE

The product(s) described in this manual complies with all application European

Union (CE) directives if it has a CE marking. For computer systems to remain

CE compliant, only CE-compliant parts may be used. Maintaining CE

compliance also requires proper cable and cabling techniques.

E-Mark

The "E" mark is based on ECE regulations issued by the Economic

Commission for Europe. It is an organizational part of the UN and the

members are EU countries and many others. Therefore, the acceptance of

approved components is much broader, especially in the eastern part of

Europe. It is necessary to confirm whether a particular country has accepted

(signed) the application of an ECE-regulation; as the application it is not

mandatory for the countries.

Product Warranty Statement

Warranty

Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and

workmanship for 2 years from the date of purchase by the original purchaser. During the

warranty period, we shall, at our option, either repair or replace any product that proves to be

defective under normal operation. Defects, malfunctions, or failures of the warranted product

caused by damage resulting from natural disasters (such as by lightening, flood, earthquake,

etc.), environmental and atmospheric disturbances, other external forces such as power line

disturbances, plugging the board in under power, or incorrect cabling, and damage caused

by misuse, abuse, and unauthorized alteration or repair, and the product in question is either

software, or an expendable item (such as a fuse, battery, etc.), are not warranted.

RMA

Before sending your product in, you will need to fill in Cincoze RMA Request Form and

DS-1100 Series | User Manual 7

obtain a RMA number from us. Our staff is available at any time to provide you with the most

friendly and immediate service.

◼ RMA Instruction

⚫ Customers must fill in Cincoze Return Merchandise Authorization (RMA)

Request Form and obtain a RMA number prior to returning a defective product

to Cincoze for service.

⚫ Customers must collect all the information about the problems encountered

and note anything abnormal and describe the problems on the “Cincoze

Service Form” for the RMA number apply process.

⚫ Charges may be incurred for certain repairs. Cincoze will charge for repairs to

products whose warranty period has expired. Cincoze will also charge for

repairs to products if the damage resulted from acts of God, environmental or

atmospheric disturbances, or other external forces through misuse, abuse, or

unauthorized alteration or repair. If charges will be incurred for a repair,

Cincoze lists all charges, and will wait for customer’s approval before

performing the repair.

⚫ Customers agree to insure the product or assume the risk of loss or damage

during transit, to prepay shipping charges, and to use the original shipping

container or equivalent.

⚫ Customers can be sent back the faulty products with or without accessories

(manuals, cable, etc.) and any components from the system. If the

components were suspected as part of the problems, please note clearly

which components are included. Otherwise, Cincoze is not responsible for the

devices/parts.

⚫ Repaired items will be shipped along with a "Repair Report" detailing the

findings and actions taken.

Limitation of Liability

Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use,

whether based on warranty, contract, negligence, product liability, or otherwise, shall not

exceed the original selling price of the product. The remedies provided herein are the

customer’s sole and exclusive remedies. In no event shall Cincoze be liable for direct,

indirect, special or consequential damages whether based on contract of any other legal

theory.

Technical Support and Assistance

1. Visit the Cincoze website at www.cincoze.com where you can find the latest information

about the product.

2. Contact your distributor or our technical support team or sales representative for

technical support if you need additional assistance. Please have following information

ready before you call:

DS-1100 Series | User Manual 8

⚫ Product name and serial number

⚫ Description of your peripheral attachments

⚫ Description of your software (operating system, version, application software, etc.)

⚫ A complete description of the problem

⚫ The exact wording of any error messages

Conventions Used in this Manual

Safety Precautions

Before installing and using this device, please note the following precautions.

1. Read these safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Disconnected this equipment from any AC outlet before cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment and

must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall

may cause damage.

7. Make sure the voltage of the power source is correct before connecting the equipment

to the power outlet.

8. Use a power cord that has been approved for using with the product and that it matches

the voltage and current marked on the product’s electrical range label. The voltage and

current rating of the cord must be greater than the voltage and current rating marked on

the product.

9. Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

DS-1100 Series | User Manual 9

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened only

by qualified service personnel.

If one of the following situations arises, get the equipment checked by service

personnel:

⚫ The power cord or plug is damaged.

⚫ Liquid has penetrated into the equipment.

⚫ The equipment has been exposed to moisture.

⚫ The equipment does not work well, or you cannot get it work according to the user's

manual.

⚫ The equipment has been dropped and damaged.

⚫ The equipment has obvious signs of breakage.

14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer.

15. Equipment intended only for use in a RESTRICTED ACCESS AREA.

DS-1100 Series | User Manual 10

Package Contents

Before installation, please ensure all the items listed in the following table are included in the

package.

Item

Description

Q’ty

1

Embedded System

1

2

Heat Sink Pack

1

3

Screw Pack

1

4

Wall Mounting Kit

1

5

Power Terminal Block Connector

1

6

Remote Power On/Off Terminal Block Connector

2

7

Fan Terminal Block Connector

1

8

DVI-I to VGA Adaptor

1

Note: Notify your sales representative if any of the above items are missing or damaged.

Ordering Information

Model No.

Product Description

DS-1100-R20

7/6th Generation Intel Core Series Processors,

High Performance, Expandable and Modular Rugged Embedded

Computer

DS-1101-R20

7/6th Generation Intel Core Series Processors,

High Performance, Expandable and Modular Rugged Embedded

Computer with 1x PCI/PCIe Expansion Slot

DS-1102-R20

7/6th Generation Intel Core Series Processors,

High Performance, Expandable and Modular Rugged Embedded

Computer with 2x PCI/PCIe Expansion Slots

DS-1100 Series | User Manual 11

Chapter 1

Product

Introductions

DS-1100 Series | User Manual 12

1.1 Overview

Cincoze DS-1100 Series is a high-performance fanless embedded computer powered by 7/6th

generation Intel® Core™ platform supporting a wide range of desktop CPUs (socket-type, LGA1151),

and accommodates two DDR4 sockets up to 32 GB which allows DS-1100 Series to fulfill all kinds of

high-end computing requirements. DS-1100 Series provides powerful functionalities such as rich I/Os,

Power over Serial, Electrical Isolated Serial Ports, Optical Isolated Digital I/O, multiple LAN, Power

over Ethernet, M12 connectors, RAID 0/1, Power Ignition Sensing and Instant Reboot. Thanks to

Cincoze’s CMI & CFM Technology, it allows you to configure DS-1100 Series according to your

specific needs with ready-to-use modules. DS-1100 Series also supports maximum 2 PCI/PCIe

expansion slots with different combination of interfaces for expanding all kinds of application add-on

cards. DS-1100 Series is truly a rugged computing system with features of wide operating

temperature (-40°C to 70°C), wide range DC power input (from 9V to 48V), high tolerance of shock

and vibration, high-standard industrial protections and the integrated SuperCap for battery-free

operation. DS-1100 Series is suitable to deploy in a harsh environment and for critical applications,

and it is totally maintenance-free.

1.2 Highlights

High Performance

• Supports Intel® 7/6th Generation Processors (65W/35W)

• Performance Enhanced by Intel® 14 nm Technology

• Intel® HD Graphics Supports Triple Independent Display

Resolution Up to 4K

• Intel® Q170 Chipset Brings More High-speed I/Os

Powerful Functionalities

• Rich I/Os • Multiple LAN

• Power over Serial • Power over Ethernet

• Electrical Isolated Serial Port • RAID 0/1

• Optical Isolated Digital I/O • Instant Reboot

• Power Ignition Sensing • M12 Connectors

Fully Modular and Expandable

• CMI (Combined Multiple I/O) Technology for I/O expansion

• CFM (Control Function Module) Technology for Adding

Power Ignition Sensing Function

• Mini-PCIe Modules and Dedicated I/O Brackets Are Available

• PCI/PCIe Slot with Different Combination of Interfaces

DS-1100 Series | User Manual 13

1.3 Product pictures

DS-1100

DS-1101

DS-1102

Front

Rear

1.4 Key Features

⚫ Supports Intel® 7/6th-Gen Intel® Core™ i3 / i5 / i7 Socket-type CPU (LGA1151)

⚫ 2x DDR4 SO-DIMM Socket, 2,133MHz, Supports Up to 32 GB

⚫ Triple Independent Display (1x DVI-I, 2x DP)

⚫ 2x 2.5" SATA HDD/SSD bay (Gen3), Supports RAID 0/1

⚫ PCI/PCIe Slot with Different Combination of Interfaces (For DS-1101 & DS-1102 only)

⚫ 2x CMI Interfaces with 6 Types of Optional Modules for I/O Expansion

⚫ 1x CFM Interface for Adding Optional Power Ignition Sensing (IGN) Module

⚫ Supports 3x Full-size Mini-PCIe Slot for Wireless & I/O Expansion

⚫ Wide Operating Temperature (-40°C to 70°C)

⚫ EN50155 / EN50121-3-2 Certified for Railway Application

⚫ E-Mark (E13, No.10R-0514229) Certified

⚫ Safety: LVD EN62368-1

DS-1100 Series | User Manual 14

1.5 Hardware Specification

Processor

• 7th Generation Intel® CPU (Kaby Lake-S)

- Intel® Core™ i7-7700T Processor (8M Cache, up to 3.80 GHz, 35W TDP)

- Intel® Core™ i5-7500T Processor (6M Cache, up to 3.30 GHz, 35W TDP)

- Intel® Core™ i3-7101TE Processor (3M Cache, 3.40 GHz, 35W TDP)

- Intel® Celeron® G3930TE Processor (2M Cache, 2.70 GHz, 35W TDP)

- Intel® Core™ i7-7700 Processor (8M Cache, up to 4.20 GHz, 65W TDP)

- Intel® Core™ i5-7500 Processor (6M Cache, up to 3.80 GHz, 65W TDP)

- Intel® Celeron® G3930E Processor (2M Cache, 2.90 GHz, 54W TDP)

• 6th Generation Intel ® CPU (Skylake-S)

- Intel® Core™ i7-6700TE Processor (8M Cache, up to 3.40GHz, 35W TDP)

- Intel® Core™ i5-6500TE Processor (6M Cache, up to 3.30GHz, 35W TDP)

- Intel® Core™ i3-6100TE Processor (4M Cache, 2.70 GHz, 35W TDP)

- Intel® Pentium® Processor G4400TE (3M Cache, 2.40 GHz, 35W TDP)

- Intel® Celeron® Processor G3900TE (2M Cache, 2.30 GHz, 35W TDP)

- Intel® Core™ i7-6700 Processor (8M Cache, up to 4.00 GHz, 65W TDP)

- Intel® Core™ i5-6500 Processor (6M Cache, up to 3.60 GHz, 65W TDP)

- Intel® Core™ i3-6100 Processor (3M Cache, 3.70 GHz, 51W TDP)

- Intel® Pentium® Processor G4400 (3M Cache, 3.30 GHz, 54W TDP)

- Intel® Celeron® Processor G3900 (2M Cache, 2.80 GHz, 51W TDP)

Chipset

• Intel® Q170

BIOS

• AMI 16Mbit SPI BIOS

Memory

• 2x DDR4 260-pin SO-DIMM socket, support up to 64 GB

(2133/2400 MHz, un-buffered and non-ECC type)

Graphics

• Intel® HD Graphics supports triple independent display

(1x DVI-I, 2x DP)

Audio

• Realtek® ALC888-GR

• High Definition Audio

I/O Interface

• 1x DVI-I Connector, Resolution 1920 x 1080

• 2x DisplayPort Connector, Resolution 3840 x 2160

• 2x GbE LAN (Support WoL, Teaming, Jumbo Frame and PXE), RJ45

- GbE1: Intel I219-LM

- GbE2: Intel I210

• 2x RS-232/422/485 with Auto Flow Control Support 5V/12V, DB9

• 6x USB 3.0, Type-A

• 2x USB 2.0, Type-A

• 1x Line-out & 1x Mic-in, Phone Jack 3.5mm

• 1x ATX Power On/Off Switch

• 1x AT/ATX Mode Switch

• 1x Clear CMOS Switch

• 1x Remote Power On/Off Connector, 2-Pin Terminal Block

• 1x Remote Reset Connector, 2-Pin Terminal Block

• 1x External FAN Connector, 4-Pin Terminal Block

Storage

• 2x 2.5” SATA HDD/SSD Bay, Support RAID 0/1 (Gen3)

• 3x mSATA (shared by Mini-PCIe socket) (Gen3)

Power Requirement

• Support AT/ATX Power Type

• Power Input Voltage 9-48VDC

• One 3-Pin Terminal Block Connector

• Power Adapter AC/DC 24V/5A 120W or 24V/9.2A 220W (Optional)

Expansion

• Support CFM (Control Function Module) Technology

- CFM IGN Module

• Support CMI (Combined Multiple I/O) Technology

- 4x RJ45 GbE LAN Module - 4x M12 GbE LAN Module

- 4x RJ45 GbE PoE+ Module - 4x M12 GbE PoE+ Module

- 4x RS-232/422/485 + 8x Optical Isolated DIO Module

- 4x Isolated RS-232/422/485 + 8x Optical Isolated DIO Module

• 1x PCI/PCIe Expansion slots (for DS-1101 only)

Optional Riser Card: • 1x PCIex16 • 1x PCI

• 2x PCI/PCIe Expansion slots (for DS-1102 only)

Optional Riser Card: • 1x PCIex16+1x PCIex1 • 2x PCIex8

Optional Riser Card: • 1x PCIex16+1x PCIx1 • 2x PCI

Support maximum dimension of add-on card

(H x L):110mm x 237mm

• 3x Full-size Mini-PCIe Sockets

• 1x SIM Socket

Other Function

• Support Instant Reboot Technology (0.2 sec)

• SuperCap Integrated for CMOS Battery Maintenance-free Operation

• Watchdog Timer: Software Programmable Supports 256 Levels

System Reset

• Power Ignition Sensing (IGN) Function (with optional CFM module)

12V/24V Selectable

Physical

• Dimension (WxDxH): 227 x 261 x 128 mm

• Weight: 4.70 kg

• Extruded Aluminum with Heavy Duty Metal

• Support Wall Mounting • Unibody Chassis

• Fanless Design • Jumper-less Design

Protection

• Reverse Power Input Protection

• Over Voltage Protection

-Protection Range: 51-58V

-Protection Type: shut down operating voltage, re-power on at the

present level to recover

• Over Current Protection: 15A

• ESD Protection: +/-8kV (air), +/-4kV (contact)

• Surge Protection: 2kV

Operating System

• 7th Generation Intel® CPU (Kaby Lake-S): Windows® 10

• 6th Generation Intel® CPU (Skylake-S): Windows® 10/ 8.1/ 7

• Linux: Supports by project

Environment

• Operating Temperature:

7th Generation Intel® CPU (Kaby Lake-S)

- 35W TDP CPU: -40°C to 50°C

- 51W~65W TDP CPU: -40°C to 45°C

6th Generation Intel® CPU (Skylake-S)

- 35W TDP CPU: -40°C to 70°C

- 51~65W TDP CPU: -40°C to 50°C

(With extended temperature peripherals; Ambient with air flow;

According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)

• Storage Temperature: -40°C to 85°C

• Relative Humidity: 70°C @ 95% RH (Non-condensing)

• EMC: CE, FCC Class A

• Safety: LVD EN62368-1

• Railway: EN50155, EN50121-3-2

• In-Vehicle: E-Mark (E13, No.10R-0514229) Certified

DS-1100 Series | User Manual 15

1.6 System I/O

1.6.1 Front

ATX Power On/Off

Used to power-on or power-off the system

AT/ATX Mode Select Switch

Used to select AT or ATX power mode

Power LED

Indicates the power status of the system

Temperature LED

Indicates the temperature of the system

HDD LED

Indicates the status of the hard drive

Digital I/O LED

Indicates the working status of digital input/

output

Ethernet LED

Indicates the status of the LAN ports

USB 3.0 Port

Used to connect USB 3.0/2.0/1.1 device

USB 2.0 Port

Used to connect USB 2.0/1.1 device

DisplayPort

Used to connect the system with DisplayPort

monitor

SIM card, CMOS Battery, and 2.5”

Removable HDD Bay

Used to inserts a SIM card, CMOS battery, and

2.5” HDD

DS-1100

DS-1100 Series | User Manual 16

DS-1101

DS-1102

DS-1100 Series | User Manual 17

1.6.2 Rear

DC IN Terminal Block

Used to plug a DC power input with terminal

block

External Fan Terminal Block

Used to plug an external fan with terminal block

DVI-I Port

Used to connect a DVI monitor or connect

optional split cable for dual display mode

PS/2 Port

Used to connect the PS/2 device

LAN Port

Used to connect to local area network

Display Port

Used to connect a monitor with DisplayPort

interface

USB 3.0 Port

Used to connect USB 3.0/2.0/1.1 device

USB 2.0 Port

Used to connect USB 2.0/1.1 device

Antenna Hole

Used to connect an antenna for optional wireless

module

COM Port

Used to connect to RS-232/422/485 serial

devices

Line-Out

Used to connect a speaker

Mic-In

Used to connect a microphone

Remote Power On/Off & Remote Power

Reset Terminal Block

A terminal block used to connect to remote

power on/off switch

Universal I/O Bracket

Used to customized I/O output

DS-1100

DS-1100 Series | User Manual 18

DS-1101

DS-1102

DS-1100 Series | User Manual 19

1.7 Mechanical Dimension

DS-1100 Unit: mm

DS-1101 Unit: mm

DS-1100 Series | User Manual 20

DS-1102 Unit: mm

Page is loading ...

Cincoze DS-1100 Series Owner's manual

Cincoze DS-1100 Series Owner's manual

Related papers

Other documents