
SMDOLLY
ASSEMBLY MANUAL
PACKAGE CONTENTS
ASSEMBLY INSTRUCTIONS
BUFFALO CORPORATION 950 HOFF ROAD ST LOUIS, MO 63366 636-532-9888
12 pieces total swivel casters
2 pieces 8 x 8 inch dolly
1 piece 7 x 8 inch dolly
1. Remove the nut that has been pre-assembled on
each swivel caster.
2. Insert the stem into one corner of the dolly.
3. Attach the nut onto the swivel caster and tighten.
4. Attach 4 swivel casters to each dolly.
5. Before use, check that all nuts are securely
tightened to each dolly.