TuffBilt 73026065 Installation guide

Brand: TuffBilt

Model: 73026065

Type: Installation guide

TuffBilt 73026065 is a versatile and durable tool designed for a wide range of applications. With its heavy-duty construction and powerful motor, the TuffBilt 73026065 can handle even the most challenging tasks.

Some of the key features of the TuffBilt 73026065 include:

Powerful motor for superior cutting and grinding performance
Durable construction for long-lasting use
Lightweight and compact design for easy handling
Variable speed control for precise operation
Quick-change accessory system for fast and easy tool changes

The TuffBilt 73026065 is ideal for a variety of tasks, including:

Some of the key features of the TuffBilt 73026065 include:

Powerful motor for superior cutting and grinding performance
Durable construction for long-lasting use
Lightweight and compact design for easy handling
Variable speed control for precise operation
Quick-change accessory system for fast and easy tool changes

The TuffBilt 73026065 is ideal for a variety of tasks, including:

Mixed Materials Gate

BOM-34107838

Read all instructions prior to installing product.

Refer to manufacturers safety instructions when operating any tools.

To register your product, please visit:

barretteoutdoorliving.com

INSTALLATION INSTRUCTIONS

• English

..............................................................................

• Français

............................................................................

• Español

.............................................................................

Post Kits

Concrete

Coarse Gravel (6" per hole)

Post Hole Digger/Shovel

String Line Stakes with String

Level

Tape Measure

Safety Glasses

⁄

⁄16⁄

" Drill or Socket Wrench

2" Spacer Blocks

Rubber Mallet

TOOLS/MATERIALS NEEDED:

BEFORE YOU BEGIN:

Check your local zoning laws.

• Local zoning laws and Home Owners

Associations may regulate the location, style

and height of your fence or even require a

permit signoff beforehand.

• Check local codes for frost line depth and

regulations.

• Additional products and assembly may be

required to meet wind code requirements.

Notice of acceptance (NOA) can be found at

www.miamidade.gov/building/pc-search_app.asp

Contact your local utilities companies.

• You must have the utility companies clearly

mark your property for electrical, gas or

water lines to avoid puncturing any unseen

underground utilities.

WARNING:

• Improper installation of this product can result in personal injury. Always wear safety goggles when

cutting, drilling and assembling the product.

• Incorrect installation may cause harm to the product or individual.

• Check local building codes to determine pool-safe fencing options.

NOTICE:

• DO NOT attempt to assemble the kit if parts are missing or damaged.

• DO NOT return the product to the store. For assistance or replacement parts call: 1-800-336-2383.

Component list:

Description

Boards

Rails

Uprights

Adaptor Strips

Upright Caps

Boerboel® Hinges

Hole Plugs

⁄

⁄16⁄

" Screws

INSTALLATION TIPS:

HOW TO MEASURE:

• When installing gate hardware onto gate, it needs to be on level ground

• Review enclosed Boerboel

butter y hinge instructions before installation

• For measuring, note that gates 6' or larger come with 2" U-frame construction

When measuring for your drive gate, make sure to leave enough space for all gate hardware,

including hinges, gate latch and drop rod. When using Boerboel

hardware, leave 1" clearance

for all hinges and 1" clearance for a drop rod. Refer to speci c hardware instructions for space

requirements.

Hole Plugs

Uprights

Rails

Upright Caps

Adaptor Strips

Screws

Hinges

Adaptor Strips

To obtain and review a copy of the warranty please go to: BarretteOutdoorLiving.com/warranty. You can

also contact

1-800-336-2383

or write to Barrette Outdoor Living, 7830 Freeway Circle, Middleburg Heights,

Ohio 44130 to obtain a copy of the warranty.

Place upright rails on side. Slide rails inside

uprights (Fig. 1).

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Align the rails to be 90º to the upright (Fig. 2.)

Install outside screws (Fig. 3).

Install adaptor strip. Install boards. Install

opposite adaptor strip. Install remaining upright

(Fig. 4)

Repeat Steps 2 & 3 for opposite gate upright.

90º

Adaptor

Strips

Adaptor

Strips

Boards

Upright

Option 1

Option 2

Upright

Determine Gate Opening:

Refer back to “How to Measure”

Gate opening is determined by width of gate plus clearance for

hinge, latch, and drop rod (latch and drop rod sold separately);

refer to latch and drop rod installation instructions for speci c

space requirements.

Determine

location and gate

opening before

installing fence.

Boards

Install remaining screws in all four corners (Fig. 5).

Install screw hole plugs in all four corners.

Install upright caps (Fig. 6).

Using the hinge instructions, install the hinges

⁄

⁄2⁄

" to 4" away from the top and bottom of the

upright (Fig. 7).

Fig. 5

Fig. 6

Fig. 7

Upright

Cap

Hole Plugs

Option 1

Option 2

Page is loading ...

BARRETTE OUTDOOR LIVING

7830 FREEWAY CIRCLE

MIDDLEBURG HEIGHTS, OHIO 44130

TEL: (

800) 336-2383

WWW.BARRETTEOUTDOORLIVING.COM

TuffBilt 73026065 Installation guide

Brand: TuffBilt

Model: 73026065

Type: Installation guide

Some of the key features of the TuffBilt 73026065 include:

Powerful motor for superior cutting and grinding performance
Durable construction for long-lasting use
Lightweight and compact design for easy handling
Variable speed control for precise operation
Quick-change accessory system for fast and easy tool changes

TuffBilt 73026065 Installation guide

TuffBilt 73026065 Installation guide

in other languages

Related papers

Other documents