Toto SS Specification

Toto
Brand
Toto
Model
SS
Type
Specification

This manual is also suitable for

Toto SS is an ultra high-efficiency urinal flush valve that uses hydropower, eliminating the need for batteries or an external power source. It features a 0.125 GPF flush, a self-adjusting detection range, and a 6-second detection time to prevent ghost flushing. The Toto SS also has a manual flush override and is ADA compliant. It is easy to install and comes with a three-year limited warranty.

Toto SS is an ultra high-efficiency urinal flush valve that uses hydropower, eliminating the need for batteries or an external power source. It features a 0.125 GPF flush, a self-adjusting detection range, and a 6-second detection time to prevent ghost flushing. The Toto SS also has a manual flush override and is ADA compliant. It is easy to install and comes with a three-year limited warranty.

ECOPOWER
®
Ultra High-Efficiency Urinal Flush Valve 0.125 GPF
FEATURES
COLORS/FINISHES
OPTIONAL ACCESSORIES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel
• Z-4000-J - Adapter for ground joint angle stops
TEU2UA11#SS
• TEU2UAR#SS (0.125 GPF flush valve)
• VB1311#RB (3/4" vacuum breaker tube,
3/4" angle stop, back spud)
TEU2UA12#SS
• TEU2UAR#SS (0.125 GPF flush valve)
• VB0912#RB (3/4" vacuum breaker tube,
3/4" angle stop, top spud)
• 0.125 GPF
• Self-powered hydroelectric flush valve system
• No minimum daily usage requirement
• 14” x 12” stainless steel cover plate with solid
bronze valve body
• Neutral rough-in and adjustable tail piece connection
• Manual flush override
• Smart sensor with self-adjusting detection range
• 6-second detection time to prevent ghost flushing
• ADA compliant
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifications: IAPMO(cUPC), EPA WaterSense,
ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• Complies with CA Title 20 regulations and CalGreen
when used with a 0.125 GPF wall mount urinal
• ADA compliant
• Complies with CA Prop 65 warning requirements
TOTO
®
Model No. _____________________________
Product shall be 0.125 GPF. Product shall be an
automatic infrared sensor-activated, urinal flush valve.
Product shall use hydropower, ECOPOWER flush
valve system. Product shall have heavy-duty 14" x 12"
stainless steel coverplate with satin finish. Product shall
have adjustable tail piece connection. Product shall
have neutral rough. Product shall have smart sensor
with self-adjusting detection range. Product shall have
manual flush override. Product shall have 6-second
detection time to prevent ghost flushing. Product shall
have solenoid with self-cleaning mechanism. Product
shall be ADA compliant.
TEU2UA
ECOPOWER
Auto Flush
DRAFT
TEU2UA
ECOPOWER
®
Ultra High-Efficiency Urinal Flush Valve 0.125 GPF
#SS-01171, v.03
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
• Material Bronze casting
• Power supply ECOPOWER
• Sensor detection time Factory setting at six
(6) seconds minimum
• Sensor detection range Self-adjusting to
environment
• Discharge quantity Preset to 0.125 GPF/
0.47 LPF
• Operating temperature 32°-104°F (0°-40°C)
• Water supply pressure 15 psi - 125 psi*
• Water supply connection 3/4" NPT
• Warranty Three year limited
DIAGRAM
Left water supply
1” NPT (toilet), 3/4” (urinal)
4-3/4” ± 1/2”
(120 ± 13mm)
Sensor Location
3-7/16” (87mm)
** 11-15/16”
(303mm)
16” (406mm)
3/4” (19mm)
Stud
Toilet top spud
Ø2-3/16” (Ø56mm) hole
Urinal Back spud
Ø1-5/16” (Ø33mm) hole
Toilet Back spud
Ø2-3/16” (Ø56mm) hole
11” (279mm)
CL of sensor
* X”
** 13-1/2”
(343mm)
* 14-3/4” ‡
from top of
xture (toilet)
Urinal top spud
Ø1-1/2” (Ø38mm) hole
* X”, ‡ = At least 5” clearance from sensor to tip of toilet seat up position or
to top of grab bar is required to avoid false detection.
** Opening in wall
Right water supply
1” NPT (toilet), 3/4” (urinal)
12-5/8” (320mm)
11” (280mm)
14-3/16” (360mm)
12-5/8” (320mm)
11-7/8” (301mm)
11” (280mm)
13-3/8” (340mm)
12-5/8” (320mm)
33-1/2"
(850mm)
15°
Max 19-11/16”
(Max 500mm)
*Water pressures over 80 psi are not recommended for most plumbing
fixtures. Check your local plumbing code for details.
INSTALLATION NOTES
For commercial applications only.
Warning: Failure to properly adjust angle stop to
the appropriate level can potentially cause property
damage.
For detailed installation instructions, please refer to
the installation manual.
Max flow rate to be used with
TEU2UA___________: 0.125 GPF
Confirm with local codes and standards for floor drain
requirement. Adjust control stop for proper flow rate
to the fixture.
The recommended installation for the flush valve is
to have a 7" (178mm) minimum space in wall. Do not
place grab bars in front of sensor for ADA stalls.
  • Page 1 1
  • Page 2 2

Toto SS Specification

Toto
Brand
Toto
Model
SS
Type
Specification
This manual is also suitable for

Toto SS is an ultra high-efficiency urinal flush valve that uses hydropower, eliminating the need for batteries or an external power source. It features a 0.125 GPF flush, a self-adjusting detection range, and a 6-second detection time to prevent ghost flushing. The Toto SS also has a manual flush override and is ADA compliant. It is easy to install and comes with a three-year limited warranty.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents