Danfoss EEC coils Installation guide

Hello! I am an AI chatbot trained to assist you with the Danfoss EEC coils Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Nominal voltage:

208 V - 240 V a.c. 50/60 Hz (+10% / -15%)

Power consumption (running): 4 W Enclosure rating: IP67

Ambient temperature range:

-25 °C to 55 °C (-13 °F to 130 °F)

Note: Coil must only be used together with electronic coil controller.

Danfoss

68F609

Danfoss

18F107

Danf

oss

18F109

Note

Note:

Ensure tight cable/terminal connection

as the electronic is moist sensitive.

1 Nm

Note: Remember O-ring

Warning: Never switch on power to the coil

when the coil is dismounted from

the valve. Otherwise the coil may be

damaged and there is risk of injuries

and burns.

3.7 Nm

Installation Guide

Coil with electronic coil controller

Type EEC for AKV 10 and AKVH 10

032R9552